Wood cuts in the interior for home decor (39 photos)

One of the indoor design options is carried out by cutting down a tree. It is mainly used for country houses or summer cottages, but you can use this option for decorating a room in an apartment.

There are many types of design using saw cuts, and we will try to familiarize ourselves with some of them.

Wall made of wood cuts

This part of the room is the most popular in terms of decoration, so it is the wall that is decorated with wallpaper, whitewash or wooden material.

The cut itself is an even transverse layer of wood, which is often used in design solutions. Each of the elements is distinguished by its uniqueness, because it is simply impossible to cut exactly one into one perfectly. On each of the plates there are tree rings, not a single contour of which can be repeated in the others.

In order to decorate the wall, we will need the saw cuts themselves, glue, varnish, paint or stain. To bring the cut to normal condition, you need to remove the upper part (bark), and the thickness of the layer will not have a strong significance. Alternatively, the bark can be left, which will provide an excellent effect for interiors in a rural or ethnic style.

Recommendations for decorating with wooden cuts

The first and most important point is the perfectly smooth walls on which we will glue the saw cuts. They must be pre-prepared and cleaned.
Consider options for laying wood, because you can lay the entire wall, or make a small fragment or accent.
By the way, partial laying is sometimes used to design the head of the bed, or the area above it.
The saw cuts are best suited for connoisseurs of rustic or hunting style, who will be able to appreciate every element and accessory of the design.

Related article: Insulating plastic balcony doors for the winter

Types of wood used for cuts in decoration

In principle, different types of trees are used for log houses, but the most popular are still: pine, spruce, ash, fir, oak and birch. After finishing the work with wood and gluing, everything will need to be covered with varnish and a fixative.

Choosing a tree to decorate a wall

A panel from wood cuts can be made from any type of wood, because there will be no load on the wall, which means even soft wood will be suitable. The only thing you should pay attention to is treatment with antiseptics, because some wood suffers greatly from rot.

From the point of view of aesthetic beauty, the choice is more difficult to make than from the practical side. Here everyone should give preference to their own taste, here are some types of wood, the cuts of which will make the walls look interesting:

Pine - has a pronounced pattern with thick and dark concentric circles; such a cut of wood in the interior will organically fit into the design of a house in the style of classicism or Provence;
Cedar - has a more delicate color scheme, it is suitable for any design style, the lines barely stand out on light wood;
Larch has a bright color, and a panel made from such wood will look colorful in any home; it is perfect for giving a unique shade to a room with a monotonous design;
Oak - characterized by “rays” coming from its core, crossing all concentric circles with light stripes, this is the most successful option for a house in the style of a Slavic hut. Walls made from oak cuts can decorate the entire house;
Aspen is a softer wood, it will be much easier to work with, and its yellowish tint will harmonize wonderfully with sunlight on the wall illuminated by it;
Apple tree - cuts of this tree are rarely used in construction due to low strength, but for decorating walls they are simply perfect. The unique pattern inherent in apple tree cuts will enliven any room, the dark core, and the light edges in its pattern look simply magical;
Boxwood is quite rare in our area, but if it is possible to use its cuts to decorate a wall, then this would be an excellent solution. Bright orange stains radiating from the core of the cut alternate with a pleasant light yellow tint of concentric lines, which gives the wall the appearance of a setting sun;
Pear – lends itself very well to processing, in particular grinding. It is used as an imitation of mahogany, and the shade of pear really resembles it, but it is not worth making panels on all the walls in the room from pear slices, the room will turn out too gloomy;
Walnut - the color scheme of this type of wood alternates between dark and light shades, which gives it a certain gothic feel; walnut will look great in a wooden house with high ceilings and strict outlines;
Linden - only young saw cuts can be used to decorate walls with this type of wood, because in old ones, over 10 years old, the core begins to rot and the appearance deteriorates greatly;
Juniper is a shrub, but cuts of its thick branches can be used to decorate walls; they have a pleasant pinkish-white sapwood shade and a dark brown core.

Do-it-yourself panel from saw cuts

The second most popular use option (after wall decoration). The very meaning of the panel is a certain composition, which is most often made from several types of trees and their individual fragments. Simply put, it is a type of art in the form of a painting, which is made from felled trees with or without bark.

Basically, it displays a certain abstraction that emphasizes the atmosphere of the room. It can also be made from unpeeled wood, then only the part that is glued to the wall is processed. Fragments that can be additionally used are stumps, branches and wood debris.

You can create anything, the main thing would be desire and inspiration. In addition, such a picture can be left untouched in the form in which it is or painted with paints, adding dynamism and brightness to your work of art. Additionally, some people apply ornaments, carvings or other designs to the end part. A similar design can also be used to frame family photographs, other paintings or objects.

Wood flooring

Since wood is often used as a flooring material, log houses have also found their place here. The idea is quite interesting, the appearance of the final result will also not leave anyone indifferent.

It is important to note that the branches used to cover the floor are absolutely not suitable for log houses. Here the design will be carried out using larger wood elements.

Please note that the thickness of the cut for the flooring will play a significant role, because the constant load in terms of furniture and other factors must be calculated. One more thing - do not use soft wood, because it simply may not withstand constant load.

Related article: Entrance hall in English style

The process of finishing the floor itself will be a little more complicated than, for example, walls. It is lined with ceramic tiles, and a special solution is used during installation. After the elements are installed, workers perform grinding so that in the end we can get a perfectly smooth and beautiful surface.

The final stage is treatment with varnish, which will prevent the floor from becoming dirty in the future.

Wood cuts to decorate the walls of a house

No lining can compare in design with such wall decoration in a country house. The forest-smelling wall will make you feel like a hermit, surrounded by centuries-old trees. An unusual wall design is quite simple to make; you just need to cut thin plates from a tree trunk, then each “tile” is carefully attached to the wall with glue.

In this way, you can lay out the entire surface, circle by circle, or just part of the wall - in both cases, the effect will be amazing. The designers called this decor “an inverted wall”—it leaves the feeling that a woodpile of logs that have not yet been split has been placed in the room.

Of course, before decorating a wall with wood, it needs to be leveled; the cuts can be laid in any order - each tile will have a unique pattern, due to which the originality of the design is achieved.

Wood cuts in the interior

Apartment interior with wood cuts

After attaching the saw cuts to the surface of the wall, it must be treated so as not to accidentally injure yourself due to the roughness of the wood and to avoid splinters. You can sand the surface, then cover it with stain or varnish. In addition, wooden saw cuts need to be treated with antifungal and insecticidal compounds.

This design is possible in a room decorated in the appropriate style, and the wooden cuts in the interior must be supported by at least a few more decorative elements, otherwise they will look alien. Properly selected materials for finishing the remaining walls, colors and furniture will create a harmony of space that emphasizes the unity of man and nature.

The use of wood cuts in the interior

Design with wood cuts

DIY room decor using wood cuts

See alsoHow to use shelves on the wall in the interior.

A variety of options for using saw cuts in the interior

In fact, you can create anything from wooden cuts. This is not only the decoration of walls and floors, but also the creation of individual elements and accessories for decorating the interior of the house.

Designers have long been using in their work such elements of sawn wood items as:

Flower pots. It would seem that everyone is accustomed to seeing them exclusively as ceramic. But no, the development of ideas in this direction did not stop with this material. Therefore, you can safely find a wooden pot made from sawn wood.
To create such a pot, not very thick branches are used, from which small circles are cut. The pot itself is then made from them.
Shelves. An integral part of any interior, which you simply cannot do without. They are made from a cut of a thick trunk, which is first sanded and then varnished. Installation of the finished product occurs using brackets.

Stands for hot plates and cups are made from the cut of a large tree. The manufacturing process looks something like this: first, a cut of a larger diameter is taken, and the middle is taken out of it, in place of which a cut of a smaller diameter is installed. The result is a rather interesting intricate pattern that can be painted in the future if desired.

A watch is another useful functional thing that you simply cannot do without. First you need to remove the watch mechanism. Then, in a previously prepared cut of wood, the middle is hollowed out, from which the arrow holder is removed. Then the arrows and numbers themselves are mounted (optional).

Framework. An excellent decor for your favorite photographs, made from cuts of branches that are small in diameter.

Hanger. Probably one of the most used items in the house. It is made from cuts of medium thickness, which are then inserted into a rectangular frame.

This is not the entire list of what can be made and how to use it in the interior. But we can already conclude that there are quite a lot of useful, and most importantly, necessary items in everyday life.

How to make wooden saw cuts

The process of making wooden cuts is quite simple and does not require any special tools. Tree trunks and branches of varying thickness are used as raw materials, which is not a problem if you have a summer cottage or a forest nearby. It is important to remember that cross-cutting has its own characteristic differences and uniqueness, depending on the type of wood. For example, pines and larches are characterized by the presence of transparent amber layers, and apple, cherry and oak are characterized by a combination of a dark central core with a lighter periphery. It is best to start by making sections of one type of wood, because using wood from several types of wood at once will require a certain amount of experience and artistic taste.

Saw cuts can be made in a variety of sizes

It is best to take blanks for saw cuts from freshly cut live twigs and branches, which abound in logging sites. There is plenty of such material when seasonal pruning of trees in the garden and at the dacha is carried out. Dry branches are less attractive in this regard, since they often have rot and cracks. It is better to cut branches into circles immediately after cutting them, while the bark is left only on the thinnest specimens. These works will require the following tools:

hacksaw for metal or wood;
cutter or jigsaw;
sandpaper, grater.

The blanks are dried in a dry room for a month, after which they undergo light sanding so that there is no threat of splinters. All detected rotten areas must be treated with epoxy glue, which will prevent further destruction of the wood. To prevent damage to the resulting decorative elements by various insects and microorganisms, antiseptic impregnation is used. The final stage of material preparation is varnishing, for which diluted compounds are used. This is done to prevent the installation glue from penetrating deep into the wood, which leads to the formation of unsightly stains.

Stages of working with saw cuts

It is logical that when an object is made using wood cuts, it not only has its own uniqueness, but also nuances associated with the care of the material.

Cross cutting opens gaps that make the wood and the future object it will be applied to vulnerable. Therefore, it is imperative to carry out initial and then carpentry processing in order to avoid unwanted nuances in the future.

In the case of restoration of such wood, the method of filling with a special resin is used. The process takes place in several steps, the first of which is covering the cracks with paper tape, then resin is poured in layers. Each layer must dry thoroughly, only then can the next one be poured. The final stage will be milling the cut and removing excess residue. Then the product can be sanded.

The second step is polishing and oiling, after which the cut becomes even and smooth. At this stage, the transitions of natural colors and the color of the tree itself are clearly visible. At the same time, oil impregnation allows you to see the structure and pattern of the cut. It will also protect against the negative impact of the surrounding space.

In the end, we can summarize that wood cuts are an indispensable material both for decorating floors and walls, and for making other household items we need. The main advantage is that all this is made from natural and environmentally friendly materials that have a positive effect on our health.

Furniture made from wooden saw cuts

In the skillful hands of a master, a piece of wood turns into... Yes, into anything:

into the tabletop;
into a chair;
on a hanger;
in the regiment.

All these pieces of home furniture can be made from wood cuts, you just need to choose a different diameter and thickness of the trunk from which the blanks will be cut.

For a small decorative table you need a wider log; the cut is not too thin. The table will turn out original if you leave the bark of the tree. The effect of naturalness and naturalness will be complete. Choose the legs to your taste, they can be metal or wooden, the table can be made very low, put a wooden tub with a flower on it, or higher - for magazines and newspapers. To protect against harmful bugs, treat the countertop with varnish with protective additives.

The use of wood cuts in the interior

Design with wood cuts

Room decor with DIY wood cuts in the form of a clock

It’s easy to make a decorative shelf from a cut tree, sawing it off from the trunk yourself or purchasing a ready-made one. From one round piece you will get two semicircular hanging shelves:

cut a circle with a diameter of approximately 30 cm in half;
Take 2 corner fasteners for wall shelves, attach them with self-tapping screws first to the shelf and then to the wall.

All! The resin-smelling piece of furniture is ready.