A complete overview of all types and shapes of acrylic bathtubs, why should you buy corner models?

What does the plumbing market offer?

If you are replacing an old bathtub, then before purchasing you need to think through the details: size, shape, depth, height and volume. The selected object must satisfy the ease of use of all members of the living space.

Manufacturers of acrylic products offer a wide range of hot tubs - these are not only rectangular shapes, they are made in the shape of an ellipse, semicircle, 5, 6 angle, octagonal and so on.

Bathtubs can vary in shape and design

The standards that existed before can now be left in the past. You can choose the desired option that is already on sale or make it to order. In this topic, we will analyze the parameters that are necessary for bathtubs, taking into account the characteristics of the complexions of all members of the living space.

Bathtub of irregular shape, size – 160x95 cm

Corner bath

Round

Rectangular

Square

Dimensions

When purchasing rectangular acrylic bathtubs, several points are very important.

1. Bathtub size and shape. It is important that it be suitable in width and height, and also have additional functions of hydromassage, jacuzzi, lighting, and heating. True, such baths are a little more difficult to maintain than simple ones. Corner and rectangular bathtubs are considered the most versatile, suitable for both large and small rooms. It is very important to know the dimensions of the future bath before purchasing it. Round shapes require a suitable interior; they are installed on a podium.
2. Acrylic coating thickness. A very important aspect: the greater the thickness, the more reliable. The layer is about 4-5 mm thick. It will be very durable, resistant to minor scratches and water.
3. Reinforcement layer. The same principle works here as with coating; several layers of reinforcement ensure a high-quality product. You can see them on the side section.
4. To verify the thickness of the walls, just point a flashlight; they should not be visible.
5. The bottom should not bend under the weight of a person.
6. You can buy a renovation kit for an acrylic bathtub. In case of minor damage, it will allow you to restore the bathtub at home with your own hands.

When making acrylic bathtubs, two methods are used:

• A layer of polymer, then plastic, all covered with acrylic.
• Cast acrylic, when a single sheet is bent into the desired shape, and the reverse side is reinforced with fiberglass.

The first option is considered budget , but the service life of such a bathtub is about 4 years, since the coating layer quickly wears off. The second option is durable , the coating service life of which is 10 years or more, but the price is an order of magnitude higher.

What to consider when choosing an acrylic product

Necessary conditions for placing a bath:

• size of purchased equipment. The bathtub must have dimensions that allow? areas to fill the room. In modern sanitary rooms, in addition to this object, there are other items (washing machine, cabinet for bath accessories, sink, toilet and others). In addition, there should be a spacious place for movement and various types of activities;
• volume and depth of sanitary equipment. For comfortable water procedures, these parameters are very important. In a horizontal position, the body should be completely covered with water, leaving only the head above its surface;
• the height of the walls of the equipment should be no more than 50 - 60 cm. It should be remembered that children will also swim there;
• width of sanitary equipment. It depends on the build of the largest family member. The gaps from the shoulder to the walls of the bathtub should be at least 10 - 15 cm.

What types and forms are there?

It is difficult to single out any specific categories of acrylic sanitary ware among the huge variety of bathtubs. However, there are still several models that are most common, and these are:

• rectangular;
• asymmetrical;
• corner;
• round;
• triangular;
• oval;
• semicircular;
• square;
• freestanding.

In addition, acrylic bathtubs come in sit-down and stand-up types . Let's consider the obvious advantages and disadvantages of each of the above models.

The price of the cheapest acrylic bathtubs starts at 5,000-6,000 rubles. It is quite difficult to determine the upper limit; you can find models for 300,000, but the average price ranges from 15,000-20,000 rubles.

Rectangular

Rectangular bathtubs are considered the “standard” option, since they fit well into almost any classic interior design. In addition, their wide range of sizes allows you to easily select an item for ablution to suit almost any height.

The standard sizes of rectangular bathtubs are as follows: 160x70, 190x80, 180x80, 150x70 and 180x90 . It is noteworthy that the inside of such a bathtub, as a rule, has an oval shape, which is quite familiar to the average, inexperienced consumer.

Of course, from a design point of view, such a plumbing item is a slightly boring, hackneyed straight option.

Asymmetrical

Acrylic bathtubs of non-standard shape are the most popular today, as more and more people strive to get the so-called “spectacular comfort”. This is when a unique, unusual shape is intelligently combined with all the necessary functions, which leads to the appearance of a convenient, and at the same time stylish sanitary item.

Corner

Corner-shaped acrylic bathtubs can also be classified as asymmetrical; they are usually installed in small rooms , which can significantly save already “modest” square meters. A photo of the corner bath is shown below:

At the same time, the main distinguishing feature of such plumbing fixtures is its capacity. Even a small-looking corner bath easily holds exactly the same amount of water as a classic rectangular one, and a glass or plastic curtain turns it into a full-fledged shower cabin. That is why this form is very popular.

There are three types of corner bath:

• symmetrical (photo above);
• right (right);
• left (left).

As the name makes clear, each of the models has either sides of equal or different lengths, which does not in any way affect the overall volume of the sanitary item. At the same time, the carefully thought-out ergonomics of corner models allows for hygiene procedures to be carried out in them with a maximum level of comfort.

The most popular sizes of corner asymmetric bathtubs are: 120x70, 120x90, 150x90, 150x70, 170x110, 170x90, 170x100, 170x70, 160x100, 140x90, 140x100, 120x120, 130x70 , 130x130, 110x110, 170x100, 90x90, 100x100, 120x120, 160x90, 140x140, 150x150, 160x160, 170x170, 150x75, 150x80 and 180x100 cm. Optimal height from the floor is 65 cm.

How much do corner acrylic bathtubs cost? The price for them starts from 5,000 for the simplest models and reaches 250,000 for products with hydromassage and chromotherapy.

Round

Round sanitary ware is most often purchased by those who decorate their washroom in the Japanese style or in the minimalist style.

The main advantages of this model :

• diameter (can reach up to 2 m);
• large capacity (several people can comfortably fit in the bath at the same time);
• the presence of pleasant additional functions (headrests, hydromassage).

The main disadvantage of such plumbing is the number of square meters it occupies. However, if the round model is installed not in an ordinary apartment, but in a country house, then this problem loses its relevance.

The size of the most compact round acrylic bathtub is approximately 130x130 cm.

Triangular

A triangular acrylic bathtub is a sanitary product intended for connoisseurs of everything new and unusual. It only recently began to appear on the market.

Its stylish, non-standard shape attracts a lot of attention, and a wide selection of sizes (from 150 to 180 cm on each side) makes this bathtub a very convenient item for washing.

Oval

The main advantage of the oval shape is its compactness relative to square, corner or triangular models.

At the same time, oval plumbing products usually have several variations in length and width. So, the smallest bathtub has dimensions of 120x70 cm, and the largest - 240x150 cm.

It is noteworthy that an externally oval object may have a bowl of a different shape . However, we should not forget that such “delights” significantly reduce the volume of the product.

In addition, oval models also have their disadvantages. In particular, they cannot be installed close to the wall without creating a special niche. And this requires significant financial and time costs.

Semicircular

Semicircular models are usually purchased by those who want to surprise their guests with an unusual shape. Such products are extremely rare in our stores. It is worth noting that it is better to install these bathtubs in spacious rooms so as not to hide the usable area.

Square

Square-shaped hydromassage baths have become especially popular now. This is primarily due to the fact that Hi-tec is in trend, and angular shapes fit perfectly into this design.

The size of these products allows two people to take a bath, and they themselves resemble a small swimming pool, so it is better to purchase them for spacious rooms.

Freestanding

Free-standing bathtubs are most often chosen by owners of country houses, who have the opportunity to allocate large square meters for a room for ablution, because such a sanitary product, installed on carved legs in the middle of the room, looks very impressive. As a standard, these plumbing items are installed in the center of the room , which makes them the main decoration of the interior.

In addition, if the owners’ capabilities allow, a freestanding acrylic bathtub can be installed next to panoramic windows. After all, if they go out, for example, into the garden, then a standard hygienic procedure easily turns into a real relaxation process.

There are several ways to install this plumbing product:

• floor mounting;
• to the podium;
• into a niche;
• on the floor.

sedentary

At first glance, acrylic sitz baths may seem extremely uncomfortable. After all, they are more intended for medical procedures than for daily home use.

However, it is possible and even necessary for families with small children, as well as persons with disabilities and the elderly to think about purchasing such a plumbing product.

For the first time, performing hygienic procedures while sitting began in Japan, where wooden barrels were used for such purposes.

The main advantage of a sitz bath is its compact size (length about 1 m). Also, modern models can have not only a square, but a rounded or triangular shape.

In addition, very often models designed for washing while sitting are complemented by an extremely convenient door and a special seat. This helps people who have problems with the musculoskeletal system to enter the bath independently.

And, of course, sit-down acrylic bathtubs are great for small bathrooms, where after installing the toilet and washbasin there is practically no free space left. The most popular sizes of such a product are: 120x70 and 100x70 cm.

For two

In fact, if you really want to, you can take water procedures together in a bath of any shape. However, most often those models that have two headrests are used for such purposes.

At the same time, rectangular, triangular, oval, and even asymmetrical models must have sufficient length and width so that two adults can comfortably fit inside.

Let us highlight several features of the most comfortable double bowl :

• its width is at least 1.5 m;
• its length allows two people to sit comfortably at the same time, and they can be placed either side by side or side by side;
• The drain hole is located in the center.

By the way, especially for those who like to take water procedures together, a rather original model called “Yin-Yang” was created.

This bathtub has two drop-shaped bowls, which are separated by a wall. Thus, each of the bathers is in his own separate “reservoir”, but at the same time close to a loved one.

Hydromassage

Separately, it is worth highlighting hydromassage bathtubs made of acrylic - these are sanitary products equipped with a system of special nozzles .

These baths come in several variations of shapes and sizes. Along with square models, stores offer oval, asymmetrical and triangular plumbing products.

The size range of such bathtubs is also varied. For example, their length can range from 140-200 cm, and their width can range from 75-120 cm.

Buying a hot tub means once and for all forgetting about such troubles as pain in your back, lower back or legs.

Product selection

On the market of existing bathtub models, you can choose an acrylic product to suit any size of the consumer. In order for the bath to satisfy all household members, you need to take into account their build and height. The length of the object in question should correspond to the height of the tallest family member.

The height of the font legs is selected in accordance with the overall height of the product. The total height should not exceed 70 - 75 cm from the floor. This is the optimal size, allowing small family members to easily climb into the bathtub. Of course, for this they additionally use ladders, podiums and other steps.

When selecting a size, it is also necessary to take into account such a parameter as the weight of the product. The weight is selected by analyzing the product with water filled inside. This way you can find out whether it complies with the permitted parameters of the load on the floor (information can be obtained from the housing department).

Acrylic bathtub sizes

A question that worries the consumer. The first thing that needs to be assessed is the area of ​​the room where the font will be installed. To do this, you should measure the length of all the walls of the bathroom, as well as the length of the room diagonally (from one corner to the other along the bottom of the floor). Make a sketch with the calculation of these values, so you will determine what parameters of the future object need to be taken into account when purchasing it. Judging by the data obtained, it is possible to more accurately select the required dimensions.

Bathtub size including frame

Standards of the past

In the past, bathtubs were produced in a certain standard: 150, 170 and 175 cm. There was no model range for this type of object, except for rectangular shapes. If you think about it, this greatly simplified the installation process - there was no need to look for a suitable size, since the models corresponded to all the parameters of the room. And it was impossible to carry out redevelopment - residential premises were rented from the state. Now let's look at what sizes are available on the market for acrylic bathtubs.

Size range

Acrylic bathtubs, compared to cast iron or steel bathtubs, differ not only in budget cost, but also in material. This type of bathtub contains plastic material. And this fact is an excellent indicator for the development of various designs and sizes. A wide range of products allows you to harmoniously choose the desired option. Acrylic bathtubs can reach both standard classic sizes (170x80), and non-standard large (190x120 and more) or small sizes (120x70). There are those that are more like mini-pools.

In corner models you can also see different configurations and sizes. Construction supermarkets offer the following grid of sizes: 120x105, 150x75, 150x90, 140x140, 160x100, 190x150.

The depth of the product can reach from 40 to 70 cm, volume from 135 l to 350 l. The weight of the products should not be less than 20 kg, usually it varies in the ranges of 15 - 20 kg (for small dimensions), 20 - 25 (for medium dimensions). The total weight of the equipment can reach up to 40 kg, but this is already in those models that have additional functions (air massage, hydromassage).

And yet, are there ideal options that will fit well into the interior, taking into account all the interests of the residents, and also meet housing safety requirements?

Rectangular bath

Corner bath

Rectangular

The main advantages of rectangular acrylic bathtubs include:

1. Light weight (45-60 kg) compared to analogues.
2. Eight stands that evenly distribute the weight over the entire bathtub.
3. Variety of sizes (the most common: 150x70, 160x70, 180x80, 170x70).
4. The thermal insulation properties of acrylic are superior to steel, so water cools 4 times slower.
5. The strength of acrylic bathtubs is several times greater than cast iron ones.
6. The operation guarantee of the acrylic bathtub is about 20 years.
7. The main problems are very easy to remove: acrylic can be repaired.

There are a large number of colors and shapes, which is why installing them in any bathroom will not be difficult. The only drawback is the easily scratched surface. An acrylic bathtub can be made in any color and shape: corner, round and even almond-shaped.

Hydromassage

Hydromassage, rectangular acrylic bathtubs appeared in everyday life not so long ago, but have already occupied the forefront of sales because they have a number of convincing advantages:

1. Weight . Cast iron is very heavy, and an acrylic bathtub weighs much less. Thanks to this, it is easy to transport and install.
2. Warm . When filled with water, the temperature practically does not change; the bath cools down very slowly.
3. Reliability . With careful use, an acrylic hot tub will last 10 years or more.
4. Restoration . If something goes wrong with your bathtub: it breaks, cracks, or the coating has deteriorated, you can restore it at home or call a specialist. Remodeling will cost less than buying a new bathtub.
5. Bacteria . It is very important that acrylic has antibacterial properties, and mold is a common problem in rooms with high humidity.
6. Design . Acrylic can be given any shape and size, and at the production stage it can even be painted in the desired color.

Among the negative aspects, it is worth noting the difficulty of care. You need special products for acrylic that are gentle on the top coating. If the installation is not strong enough, the product may become deformed. Well, the disadvantages include the high price; a high-quality bathtub will not be cheap.

Necessary criteria in choosing acrylic bathtubs

There is no exact answer to this question, since modern room designs also come in different sizes. So, in one shower room it will be advantageous to place a classic model, in another, a suitable option is the corner placement of acrylic bathtubs, the sizes of which can be different.

Particular attention should be paid to the technical feasibility of the shower room. After all, not every model can easily pass through a doorway or fit well into the total area of ​​the room. So, for a narrow room it is logical to choose a rectangular shape of the product, and for a square room a corner option.

Next, you need to choose a suitable alternative to the comfortable size of the hot tub. Keep in mind that it should be comfortable for a lying position so that you can fully relax in it. For an acrylic product, the head section should be at shoulder level. In a state of complete immersion, the legs should be able to fully straighten, and the water should cover the shoulders in order to make the water procedure more pleasant. By following these criteria, you can easily select the item you like and use it for both routine hygiene and pleasant enjoyment.

Types of acrylic bathtubs

A product of any configuration can be created from durable and plastic polymer. Rounded models captivate with the clean lines of multi-level steps, ledges and armrests. Acrylic bathtubs can have the following shape:

• corner;
• oval;
• round;
• rectangular;
• polygonal;
• asymmetrical.

A rectangular acrylic bathtub is considered traditional, the photos clearly confirm this. It fits perfectly with the bathrooms of typical apartments. Despite its simple design, a product of this shape provides the maximum level of comfort. Bathtubs made of cast acrylic are mounted along one of the walls, depending on the size of the product and the layout of the room.

The big advantage of acrylic bathtubs is the surface, which does not turn yellow or fade after contact with water.

Corner acrylic bathtubs, the sizes and prices of which are presented in a wide range, starting from 12 thousand rubles, are very popular today, as the photos prove. and reaching 700 thousand rubles. This makes it possible to install the product in a room of any size with different layouts, without cluttering it. The bathtub can be left-handed or right-handed. The free side of the product can be concave, convex or rectangular. For large rooms, you can choose an oversized model that resembles the shape of an isosceles triangle.

Helpful advice! Corner products can be purchased complete with a shower stall or for Charcot shower equipment.

The oval design can give the room elegance and respectability. However, thanks to the smooth lines, even a small product will take up a lot of space and visually reduce the size of the room. It is advisable to install such bathtubs in spacious rooms.

Custom-sized acrylic bathtubs usually cost more than regular models

Round acrylic models can hardly be called a full-fledged plumbing product. To a greater extent, this is a luxurious decorative element that will look impressive on a small podium. Round bathtubs often have impressive dimensions, being 2 m in diameter. Products are often equipped with additional functions, thanks to which they can be used as mini-pools for performing spa treatments at home. This acrylic bathtub is made to order according to individual sizes.

Helpful advice! When it is necessary to fit a plumbing fixture into a room with a complex configuration, you should choose an asymmetrical acrylic bathtub. In spacious, flat rooms you can install a product of any shape and size.