Advantages and disadvantages of built-in household appliances.

Types of built-in equipment

All kitchen appliances are divided into two types: dependent and independent.

Dependent built-in appliances are much cheaper than independent ones. It is not so convenient because it consists of several elements that are interconnected. If desired, the owner of the equipment cannot independently move one of the elements of the equipment to another location.

For example, it will be impossible to install the refrigerator in another place. This is considered the main disadvantage of this technique. Dependent equipment must be installed only above each other: the oven under the hob, since they are connected to each other by wires and have the same control mechanism. To decide to install dependent household appliances, you need to carefully consider all the components of the future kitchen.

Independent built-in equipment is much more mobile. It can be purchased (and replaced in case of failure) separately and installed in the location of the room where the customer wishes. This is a significant plus, but the disadvantages include the high price of the equipment. Independent built-in appliances are the most popular among buyers because they have no joints or seams, have a single countertop surface, and the doors of the oven, refrigerator, freezer or dishwasher can be made common with the facade of the kitchen furniture.

Designer kitchen

The first and, probably, the main factor from the point of view of arranging a kitchen is that large-sized household appliances, such as an oven, hob, etc., can be built into columns like a constructor, raising them to the required height. The main thing to remember here is that the “built-in” does not have to be on the floor, and this is very convenient.

The biggest advantage of built-in appliances is that they do not have to be at floor level

This leads to the next advantage of “integration”: the equipment changes its traditional places. For example, in our kitchens the dishwasher is often located next to the sink, but in the case of built-in appliances, this custom, associated with the length of the hoses, can be changed and the dishwasher can be placed where it is convenient.

Advantages and disadvantages of built-in technology

Advantages:

The most important and undeniable advantage of built-in appliances is its practicality and saving of kitchen space. The equipment is placed in those places that are convenient for the owner.
With proper distribution and installation of equipment, energy consumption is reduced, built-in equipment does not operate so loudly, providing reliable sound insulation.
Each piece of household appliance saves space, and its correct location allows you to functionally use each unit and feel comfortable in the kitchen.
Installing built-in household appliances is easy. It is much more convenient to install a heavy hob into furniture than to install an ordinary gas or electric stove.
Built-in household appliances are harmoniously combined with all elements of the kitchen.

Flaws:

Quite a high price.
The need to spend more time selecting the necessary equipment and discussing installation nuances with the specialist.
Dependent built-in equipment, in case of redevelopment of the premises, cannot be moved from one place to another.

Built-in appliances in the kitchen: pros and cons

When choosing kitchen equipment, you wonder: “Do I need built-in appliances? And if needed, when should I order it?”

There are at least three answers to this question. Let's look at each option separately.

#1 Order everything together. In this case, the designer will offer to combine furniture and appliances in one project. And you no longer have to look for separate cabinets or drawers, measure them and order a refrigerator or microwave oven “to fit.”

The main disadvantage of this approach is its cost, which includes the production of all kitchen furniture according to an individual project.

No. 2 Buy furniture only for built-in appliances. If you need a hob in your kitchen, you definitely don’t need to change the table and chairs - a cabinet under the stove, where you can also build an oven, is enough.

The main disadvantage of this approach is the difficulty of finding new furniture for an existing project.

No. 3 Choose built-in appliances and buy furniture after. You already know for sure that there will be a refrigerator here, and a new oven here. And with this knowledge, you buy or order cabinets and drawers “for yourself.”

The main disadvantage of the approach is the need to select furniture to match the equipment.

Selecting built-in household appliances

First of all, you need to purchase built-in household appliances for the kitchen. This type of lower kitchen appliance includes a built-in oven.

. This is the most functional built-in appliance. Includes various functions: self-cleaning, ventilation and cooling system, automatic cooking, door locking, etc. There are many models of ovens; you should pay attention to the model with a pull-out trolley.

The most functional ovens are electric. They are significantly more expensive than gas ones. Following the oven, select the hob

. The panels are gas and electric, of different widths, from a minimum of 60 centimeters to 90. Hobs have a number of advantages over standard gas stoves: a gas control system, automatic ignition, enhanced flame burners, more practical grate material, glass-ceramic surface. The burners can be arranged in a standard square, as well as in the form of a rhombus and a trapezoid. It is better to purchase a hob with a width greater than 60 centimeters: it will be more convenient to use.

To choosing a hood

you also need to approach it thoroughly. Its main advantage is power. The cleanliness of the air in the room and the presence/absence of dirt and soot on the furniture depend on this function. It is not advisable to save on this item of built-in household appliances. Let's pay attention to the built-in equipment in the photo. The size of the hood is of great importance and you need to choose a hood larger than your hob. Hoods come in different shapes: round, fireplace-shaped, trapezoidal and straight. It is undesirable to install a pipe made of corrugated foil, they do not absorb noise. A plastic air vent will be practical and silent. The most fashionable hood this season is considered to be a model with multi-colored lighting or halogen.

Dishwasher

. First of all, you need to decide on the size, taking into account the area of the kitchen, as well as the number of people living in the room. The built-in dishwasher can be equipped with a hidden control panel or an open one. Each machine has additional features, such as a light "beam" (visible on the floor) - an indicator that lights up when the machine is running and disappears when the program is completed.

The main purpose of a dishwasher is the quality of the washed dishes. Even old and dull forks and spoons will shine like new after being in the car. Other built-in equipment

: microwave, refrigerator, freezer, steamer, coffee maker.

Review of built-in appliances 2021 for the kitchen with photos

“Integration” allows us to get rid of the discomfort with wires, make the most efficient use of kitchen space, create an ergonomic, functional workspace and comfort. What technology can be built in today?

Built-in technology keeps up with the times. The victorious march of integrated devices will continue in the new year.

Already now, hoods are combined with a hob; not only microwaves, steamers, coffee machines, refrigerators, but also ironing boards are built in.
Food waste disposers are installed in sinks to reduce the need to take out trash less often and be more respectful of nature.
From a special tap comes boiling water from purified water for brewing tea.
The sockets move along the entire length of the kitchen.

Refrigerators

It is impossible to imagine any kitchen without a refrigerator. But free-standing models take up some space, which is especially important for small rooms. With the advent of built-in models, it became possible to save space.

Modern domestic and foreign brands produce “invisible appliances” in different versions: single-chamber with and without a freezer, double-chamber with a freezer on top or bottom. A large range of built-in refrigerators in different price segments allows us to best satisfy the needs of the consumer market.

Cooktops and ovens

The ideal option for equipping kitchens are built-in hobs and ovens, which are sold separately or in sets.

Most manufacturers offer kits. It is noteworthy that the cost of a set consisting of dependent appliances is lower compared to the price of individual models of hobs and ovens.

When choosing built-in kitchen appliances, it is important to know that there are different types of hob/oven sets:

electrical;
gas;
gas-electric, where the hob runs on gas and the oven runs on electricity.

Note that gas ovens have a lower potential compared to their electric counterparts.

Dishwashers

On the consumer market, built-in dishwashers are represented by a large assortment of models of different sizes:

compact (capacity from 5 to 8 sets of dishes),
narrow (capacity 10, maximum 12 sets)
full-size, designed to handle 12-17 place settings.

They differ, of course, not only in capacity, but also in dimensions (capacity depends on them).

Washing machines

About washing machines. You may object to their presence in the kitchen. However, quite a large part of the built-in models are installed in the kitchen, for various reasons, for example, with a very small bathroom area, which is found in Khrushchev apartments.

Such machines can be built completely into furniture or for installation under a tabletop. The second option looks like a separate technique, but its design includes a removable top panel, which can be replaced with a kitchen countertop, leaving the front working model open.

Dish dryers

Built-in dish dryers are an excellent solution to make dishes invisible to prying eyes. They make it possible to free up the upper surface of the kitchen unit as much as possible and ensure safety during operation.

Installed in the lower modules of kitchen furniture, dryers are as convenient and accessible as possible for adults and children. Made from durable, safe materials, built-in dryers are durable, reliable, and durable.

Sinks

Built-in countertop sinks are convenient, practical, and functional designs. The variety of materials and design solutions opens up a variety of options for arranging the kitchen interior. The ability to remove any appliance from view in your kitchen is the face of the new luxury!

Of course, by choosing built-in technology and making it invisible, we have to spend money. But, you see, this is how we save free meters of living space, which does not cost us cheap.

Do you have unusual built-in appliances in your kitchen? Is it convenient to use? What innovations would you like to use in your kitchen?

Principles of installation of built-in equipment

When installing built-in equipment, you must adhere to the following rules:

Install equipment so that the overall appearance of the room is consistent in shape, color and texture.
Methods of integrating equipment into a “table top” and into a “column” are widely used. In the first case, dishwashers, refrigerators, washing machines and hobs are installed, and the hood is left open. All small household appliances are placed in a drawer. In the second case, it is more practical and safer to install an oven in the “column”, a double boiler, and a microwave oven above it.

It is important that all necessary calculations and, directly, the installation of built-in household appliances, including the supply of electricity, water supply and sewerage, are carried out by qualified workers. Built-in household appliances have many advantages and have gained popularity not only in Russia, but also far beyond its borders.

Important nuances

Any development of a furniture layout is built in accordance with certain rules regarding the strict order of placement of the main elements of the kitchen:

fridge;
sink;
table for work needs;
plate.

Such strict adherence will allow you to achieve the most rational stay in this room, in which every action will be productive. The stove should not be located under a window so that a random blow of wind does not suddenly extinguish the fire. It is also not recommended to install it near a wall, because constant cooking and boiling oil will not have the best effect on its surface.

Do built-in appliances have any disadvantages?

More modest functionality. The functionality of built-in and free-standing kitchen appliances in the mass segment is practically the same. But if you need a super-technological pro-class device, it is better to look in the assortment of free-standing models.

Difficult installation. Installing a free-standing device is as easy as shelling pears - you put it in the right place and connect it to the outlet. With built-in technology everything is much more complicated. Here furniture and built-in appliances are inextricably linked. To install each device in the furniture set, niches of precisely calculated dimensions with technical clearances and ventilation holes must be provided. Installation of built-in household appliances should only be carried out by experienced specialists.

Lack of mobility. The free-standing device can be removed, moved or moved to another location if necessary. This number will not work with built-in appliances. A stationary installation eliminates the possibility of relocation and also complicates preventative maintenance and repair of the device. For the same reason, built-in appliances are often left to the new owners when changing their place of residence.

High price . Built-in household appliances are one and a half to two times more expensive than freestanding appliances with approximately the same functionality. The final price of the finished result will be even higher - design, individual production of furniture and installation will also require financial expenses.

There is no one correct answer to the question of which equipment is better, built-in or free-standing. For each occasion, for each kitchen, for each specific family there will be its own optimal option. And whichever option you choose, in the Greenloft . ru there is a suitable solution. Our showcase presents a large selection of built-in and free-standing kitchen appliances from the best manufacturers.

Built-in kitchen appliances. What kind of technology is this?

Built-in kitchen appliances are kitchen appliances that are partially or completely built into furniture. When partially built-in, the body of the device is recessed into a niche in the furniture, and the front part remains visible. When fully built-in, the entire device, including the front part, is hidden behind the cabinet doors.

If the front part of the device does not provide any functionality, it can be completely hidden behind the furniture facade. For example, in dishwashers and refrigerators, the front part is simply doors that can be hidden under a furniture façade without a doubt. If the front part performs any functions, the device is partially recessed into a niche in the cabinet, leaving the front part visible and freely accessible. For example, the doors of ovens, microwave ovens, and wine cabinets are never covered with furniture fronts. The functional parts of built-in coffee machines, ice makers, and coolers are left open.