At any construction site, one of the main mechanisms is an electric concrete mixer. This is an integral part of the successful and efficient work of both professionals and amateurs who are just starting to engage in construction on their own. It is the volume of work performed that must be taken into account when purchasing a concrete mixer. Information on how to choose the right tool is contained in this article.
An electric concrete mixer is one of the main mechanisms at any construction site.
see also
Comments 31
There was a problem: the casing was closed; there was no airflow to the engine. There is a heat sensor on the engine body.
Mine was “buried” in the wiring of the windings.
put the conder (white barrel) at 50 mF (50 microfarads), it will be both starting and working
Can you explain why the air conditioner needs to be changed? Today I just pulled out the thermal relay from the wiring and secured it closer to the fan - I worked the shift without stopping. Although the engine was already very hot.
if it is very hot, the varnish on the wires will come off and there will be a short circuit inside, and this is an engine replacement :(
Can you explain why the air conditioner needs to be changed? Today I just pulled out the thermal relay from the wiring and secured it closer to the fan - I worked the shift without stopping. Although the engine was already very hot.
when starting, it gives off current like a battery, and when it gives it back, it charges, parallel to the running engine; when the load on the engine increases, it takes on the “extra” current (the one that goes into the engine for “heating” (as the emf decreases, the windings heat up and, as a result, the engine “burns out” (turn-to-turn short circuit). simpler, a thermal relay, but with condensers - more correct operation of the motor (I’m an artist, that’s how I see it;-)) electricians, correct
