Installation and masonry mixtures STONE FLOWER or AXTON - which is better to choose

Axton - leader in building materials

The brand specializes in the production of various materials that have found their application in both professional and private construction. sand concrete is used for general work, in particular:

• arrangement of screeds;
• repair of any concrete surfaces;
• implementation of plastering works;
• concreting stairs;
• blind area device;
• construction of paths;
• block and brick laying;
• the mixture can be used as a mounting mortar when constructing foundations consisting of foundation blocks.

The material does not shrink and is characterized by decent strength characteristics. The finished surface is resistant to corrosion and temperature fluctuations

As you can see, the material is versatile and can be useful in private housing construction when carrying out interior and exterior work . A manual application method is provided.

floor screed axton 25 kg

PLASTERING WORKS.

We make walls and floors smooth!

We have been doing renovations in the construction market since 2004. We carry out the work according to the established construction standards SNIP. Most of our work process is mechanized. We use plastering stations of European quality Sertamaster 220/380 with a capacity of 75 m2 per 1 hour of operation, a built-in water pump, a 105 kg hopper, a 4 kW motor and a German D6/3 screw pair. GOST equipment 31606-2012. A more detailed description of the station can be found on the manufacturer’s website.

In finishing the premises we use only proven plaster solutions and mixtures. We purchase materials from trusted manufacturers, for example, primer and plaster mixtures from Knauf.

Contracts have been concluded for the supply of mixtures directly from the manufacturer at wholesale prices, which reduces the cost by up to 30%.

All work is regulated and checked during the work process.

For organizations, we will carry out plastering work in an apartment building, shopping center, office, store, cafe, restaurant, clinic, hospital, hotel, swimming pool and in any commercial building within the established time frame with a guarantee for the work. The quality of work can be viewed in our section on the website “Report on completed work”.

Latest completed orders for organizations:

— Repair work by Green-Master on Oktyabrskaya Street, 44 in Tula. — Renovation of the Tula Central Maternity Hospital on the street. Revolutions, 4, Tula. — Repair of the Arbitration Court of the Tula Region at Krasnoarmeysky Avenue, 5, Tula. — Plastering work at the Children's Infectious Diseases Hospital No. 2 on the street. Kutuzova, 8B, Tula. — House renovation in Tula in the village. Gorelki, Zarechensky district. — Plastering a house in Tula on Epifanskoe highway, Proletarsky district. — Renovation of a House in the Central District on Gogolevskaya Street.

For individuals, we will carry out plastering work in an apartment, house, country house, cottage, country house, garage within the established time frame with a guarantee for the work.

floor screed axton 25 kg

The quality of work can be viewed on our official website in the “Report on completed work” section.

Latest completed orders for 2017-2018. — Renovation of the 1st apartment in the Central district on Lenin Avenue in the city of Tula. — Plaster work in a one-room apartment in the Zarechensky district on Arsenalnaya street, Tula — Repair of a two-room apartment in the Zarechensky district, Plekhanovo village, Tula. — Plastering work in a two-room apartment – ​​Tula, Sovetsky district, Frunze. — Renovation of a three-room apartment - Tula, Zarechensky district, M, Gorky. — Plastering a 3-room apartment – ​​Tula, Proletarsky district, Kalinina street. — Plastering and turnkey renovation of a 4-room apartment — Tula, Proletarsky district, Kutuzova street. — Renovation of a five-room apartment — Tula, Central district, Friedrich street. — Plastering work in a 5-room apartment — Tula, Sovetsky district, Demonstration Street. — Renovation of 5 rooms in an apartment — Tula, Zarechensky district, st. Galkina.

You can also see in our reports how repairs are done using mechanized plaster. If requested, we send a list of completed projects to your contact email.

You can receive an estimate for the work by phone, using the feedback form, or write a message to the plastering and finishing specialist. Our official website Master Plasterer can be found on the Internet by searching for floor screed axton 25 kg .

Consumption of M300 sand concrete per 1 m²

If we consider a material such as sand concrete, the consumption per 1 m² is within 34 kg, provided that the layer thickness is 20 mm . The construction mixture is supplied in bags weighing 30.0 kg.

It is worth noting that the mixture should be stored in closed production packaging, in a room with a moderate level of humidity, without contact with water, preferably on wooden pallets. If such conditions are met, the composition is stored for six months, starting from the date of production .

Books on the topic:

Construction materials - G.I. Gorchakov - 1,475 rubles - link to book review

High-quality cement concrete with improved properties - Yuai Yuan - 1,779 rubles - link to book review

Concrete with effective additives - Anatoly Zotkin - 841 rubles - link to book review

Modern building materials - A. Svatkov - 510 rubles - link to book review

Characteristics

The mixture is made on the basis of Portland cement and quartz sand. Other characteristics are indicated in the table.

The best inexpensive zip ties

Dry types can be purchased at an affordable price; they increase thermal insulation and are perfect for rooms with a large area.

Sand concrete M-300 Istra

This type is often used for blind areas. The mixture does not contain large fractions of gravel, so the surface does not require grinding.

Advantages:

1. Allowed to be used at a temperature of 30 degrees.
2. Low cost.
3. The composition does not contain coarse filler.
4. After 28 days, the strength is 28.6 MPa.

Important! It is impossible to carry out work using this type at temperatures below +4 degrees, as the solution can harden and form voids in the structure.

Instructions for use

If the material is used in rooms with high humidity, there is no need for an additional waterproofing layer

The work is being carried out in stages, with strict adherence to the specified rules, according to the instructions.

The first stage is preparing the base:

• the surface gets rid of oil stains, dirt, dust, release agents;
• loose and weak areas should be removed;
• cracks and potholes are pre-treated using the same mixture;
• the base is covered with a strengthening primer, the layer must dry completely;
• If sand concrete is to be laid on a soil base, the surface should be compacted. To do this, a cushion of crushed stone and sand is laid, and the bottom layer of the poured mortar is reinforced.

The second stage is preparing the solution:

• pour the contents of the bag into a container filled with clean water while stirring constantly;
• one kilogram of dry mixture requires 0.16-0.20 liters of water. If Axton sand concrete is used, the water consumption per bag weighing 30 kg is 4.8 - 6 l;
• the mixture is mixed until uniform;
• mixing can be done manually or mechanically. To do this, it is advisable to use a drill with a special attachment;
• the mass is kept for 3-5 minutes, after which it is mixed again;
• sand concrete is ready for use.

An overdose of liquid leads to a deterioration in strength characteristics and the formation of cracks , that is, it is necessary to strictly observe (for Axton sand concrete 30 kg) water consumption.

The third stage - application scheme

Masonry:

• if brickwork is being done, the mortar is applied with a trowel or trowel.

Screed:

• the mixture is applied to the base using a shovel or trowel (the choice of tool is based on the required layer thickness);
• After the mixture is laid, the surface is leveled using the rule. For this purpose, special beacons can be placed. When leveling, it is necessary to ensure that there are no voids in the thickness of the solution;
• the time between laying and leveling should be reduced to a minimum;
• the freshly laid layer is protected from rapid drying, that is, the surface is covered with polyethylene film and wet sawdust for 72 hours;
• The room has not been ventilated for three days.

The clear advantage of sand concrete is its high plasticity and density, which allows the material to be used in any type of finishing work.

Areas of application

Sand concrete mixtures are often used in individual construction. Strong concrete blocks are made from Axton m300 sand concrete, which, depending on their size, can serve as the foundation and load-bearing part of the building. Sand and cement are the basis of any construction, so the material has a wide range of applications, namely:

• Pouring various types of screeds.
• Repair work on concrete surfaces.
• Application in plastering and finishing works.
• Concreting of staircase structures.
• Construction of a blind area.
• Construction of concrete paths.
• Mortar for brick or block masonry.
• Mounting mortar for foundation blocks.

Instructions for use

Construction work is divided into three points - surface preparation, preparation of mortar and use of material. The work should be done step by step.

Preparing the base:

• the surface should be cleaned of dirt, dust, and degreased;
• all loose areas are removed;
• cracks and potholes are treated with sand concrete mortar;
• the base is treated with a strengthening primer; when the layer is completely dry, work can continue;
• If sand concrete is laid on a ground surface, the base must first be compacted. Then lay a cushion consisting of crushed stone and sand. It is recommended to reinforce the bottom layer of the mortar that will be poured.

Preparation of the solution:

• the mixing container is filled with water and the dry mixture is gradually poured into it, while the solution should be mixed;
• for 1 kg of dry Axton sand concrete you will need 160-200 ml of water. For example, a bag weighing 30 kilograms will require from 4.8 to 6 liters of water;
• the mixture is mixed until smooth using improvised means or a construction mixer;
• It is recommended to leave the solution for 3-5 minutes, then mix again, the sand concrete is ready for construction work.

Important! Diluting the mixture with a large amount of water will lead to a decrease in the strength of the material and the occurrence of cracks. Fluid consumption must be strictly observed.

Application schemes:

• the solution is applied to the surface using a trowel or shovel. The choice of tool depends on the desired layer thickness;
• After laying the mixture, the surface should be leveled according to the rule. For convenience, beacons are placed. During the leveling process, you need to check that there are no voids left in the treated surface;
• the laying and leveling stages must be completed in a short period of time;
• the freshly laid mortar, which will serve as a screed, will need to be protected from rapid drying; for this, the layer is covered with plastic film for 3 days. The room is not ventilated for 72 hours.

Important! If the building mixture is used in rooms with high humidity, additional waterproofing is not required.

Reviews

Now we should consider what reviews the Axton brand (sand concrete) has earned among professional and private builders. Most craftsmen note that the material is of good quality, it does not curl or roll when applied and lies on the surface without much effort.

Working with him, according to reviews, does not create any discomfort. The building mixture meets the requirements of current standards, so the finished structures are durable, smooth, strong at an acceptable cost. The price of one bag (30 kg) is 97 rubles .

Comparative reviews and characteristics of axton sand concrete for creating a concrete floor screed are presented in the video:

Reviews and recommendations from experts

Sand concrete m300 Axton has positive reviews from professionals and private builders. Many craftsmen note that the mixture is of excellent quality; no curling or rolling occurs during application. The material is reliable, durable, easy to apply and has an affordable price.

According to reviews, sand concrete dries well without any additional drying devices. Working with him is comfortable and easy. The mixture is packaged in 30 kg paper bags, which are convenient to transport and unload at the construction site. The product meets standard current requirements, so the finished surfaces have smooth, durable, strong qualities.

The Akston building mixture has only positive characteristics. In addition to ease of use and rapid hardening, the material has many advantages - high density of finished structures, lack of shrinkage and water resistance.

Sand concrete is a dry mixture suitable for making concrete. The standard composition is represented by Portland cement and river, pre-screened quartz sand, the particle size of which does not exceed 3.0 mm. Organic and mineral additives can be added to the mixture to improve performance properties.