Which sink is better to choose?
To make the corner sink in the kitchen look harmonious in the interior, before purchasing, evaluate it according to 4 characteristics:
- Size.
- Form.
- Number of bowls.
- Material of manufacture.
Size
The dimensions of a corner sink primarily depend on the number of dishes that are supposed to be washed in it. For a large family, you need a bowl that is large in depth and width. For 1-2 people or if you have a dishwasher, you can get by with compact models.
Another factor is the size of the kitchen itself and furniture. Maintain proportions: the smaller the cabinet, the smaller the sink.
Form
Standard products are round, square, rectangular. They do not take up much space and can be installed in a corner or on a straight section. Suitable for small kitchens.
There are also corner kitchen sinks with a so-called “wing” - a platform designed for drying dishes or food. Any bowl can be equipped with a wing.
A separate type is special corner sinks. Typically shaped like a trapezoid or pentagon, they fit perfectly into trapezoidal cabinets. Installation can be done close to the edge, eliminating the need to reach for the faucet in the future. For cabinets under 90C, there are special L-shaped models - on one side they have a sink, on the other there is a wing or a second section.
Number of bowls
Perhaps, corner installation is one of the few options when having two bowls can really be useful. A second bowl is necessary when you need somewhere to put dirty dishes while someone is busy washing in the main compartment.
Material
Corner sinks, like any other, are made from various materials:
- Stainless steel. The cheapest option, it looks appropriate in almost any kitchen interior, and is easy to maintain. The downside is the loud noise from running water, which can be solved with sound insulation.
- Composite Sinks made of quartz or granite chips look noble, but are difficult to maintain. They cannot be washed using any means, but the surface may be stained by tea, coffee, carrots, beets, etc.
- Ceramics. Corner sinks are not made from it, but you can put an overhead rectangular model on a trapezoid cabinet. Looks neutral and easy to care for.
The photo shows a bright sink with a wing and a second bowl
How to choose the size and shape of the sink?
If we consider traditional corner sinks, they all have one important disadvantage. The size is too small. Many designers believe that the way out of the situation is by placing standard sinks in the corners of the kitchen. A detailed solution makes it possible to individually determine the size and depth of the bowl, and in addition to choose the most suitable arrangement of wings and accessories , taking into account the needs of the housewife.
At first, it was believed that corner sinks, which have a round or oval shape, were optimal. But during operation, we managed to find out that this is not so: when it was necessary to wash rather large objects, this caused a lot of difficulties. All this has led to the fact that the rectangular sink has become quite popular. This design is quite versatile, since it is suitable not only for cooking, but also for washing dishes, regardless of their size.
Among the sinks produced today, you can often find models that have quite original shapes. So, among them you can find options that resemble grooves, rounded patterns, bends and waterfalls .
When choosing a sink, you need to consider the following parameters:
- dimensions;
- form;
- number of bowls and wings.
Among other corner modifications of kitchen sinks, a double sink with bowls placed obliquely relative to each other is in quite high demand. The most important thing is that the far corner space has enough area to allow you to keep the product clean and have easy access to accessories.
An important criterion is the depth of the bowl . If it turns out to be small, within 15-17 mm, then when washing large kitchen items, moisture will fall on nearby objects. The best option for a sink, which will ensure equal efficiency when preparing food and washing dishes, is a depth of 20-22 mm. It is imperative to ensure that there is a gap of at least 5 mm on the countertop in front of the sink. In this case, accidental splashes will not fall on the housewife while performing this work.
Which installation method should I use?
In terms of installation methods, corner sinks do not differ from straight sinks. They are:
- Mortise. “Lie” on the surface. Moisture getting under the sides is almost inevitable.
- Flat. The upper border is flush with the tabletop. Hygienic, convenient option.
- Invoices. The edge is a few cm higher than the tabletop. Needs adjustment in height - the top edge is a maximum of 85-90 cm from the floor.
- Under-table. The sink is recessed under the countertop. Suitable for stone panels only.
The “flat edge” installation method is considered optimal for the kitchen - it looks neat and is 100% tight.
Placement of a corner sink
When you have to decide on choosing a place for washing, it is necessary to proceed from the position of convenience and care . If we compare it with conventional sinks that are located in toilets, then for a kitchen it is considered unacceptable to place the entire sink structure on the surface of the countertop.
Regardless of the hostess’s height, in any case it will be very inconvenient for her to perform her duties, since it will be very difficult to hold her hands. When using a sink of this design, the housewife will not only be very stressed, but also a large amount of water will end up outside this area. In addition to this, she will have difficulty moving food from the sink to the work area. In addition, it is worth mentioning the problems that will arise when caring for hard-to-reach corner spaces.
- If a corner design with a cabinet is chosen for a small-sized kitchen, then this option will be the most optimal, since in this case it becomes possible to create two full-fledged work areas. If the sink is installed in a regular place, then due to the lack of working surface area it will be extremely difficult to prepare several dishes at the same time.
- If the kitchen is spacious, then you need to pay great attention to choosing a place for hanging furniture. The most important thing here is to preserve usable space, which will provide convenience when working with furniture and using it for storage.
Many housewives would like to have a work area located next to the window. For such cases, a corner sink can be an excellent option. To implement this, the washing bowl and part of the work area can be placed near the window. As for the stove and accessories , a place is allocated for them along the wall. Such solutions can often be found in the apartments of European housewives, which they are very happy about.
Which headset will be most comfortable?
The most common kitchen layout is corner. Placing a sink in the corner of the kitchen in this case means functional use of the space. Use a pentagonal (beveled) model as a cabinet under the sink - it will be more convenient to approach the water.
To place a sink in the corner of the kitchen, only a corner set is not necessarily suitable. In a single-row (straight) or parallel arrangement, the corner is also present in the form of an abutment to the wall. True, using a sink located here will be inconvenient, especially if the wall is on the side of the leading hand.
The last option is a U-shaped layout. In this case, it is better to move the wet zone out of the corner, because in this case there are much more opportunities and the conditions allow it. Otherwise, the rules are the same as for corner furniture. 2 ways to form a work triangle in the kitchen with the letter P:
- Sink on the lintel, refrigerator on one side, stove on the other.
- Sink in the corner, refrigerator on one side, stove on the lintel. The third part is reserved for the dining table or consists of high columns.
In small kitchens, install a corner set: thanks to the sink between the rows, you can save valuable space on the countertop.
Practicality of corner sets
The corner is an excellent base for creating the so-called working triangle. The entire usable area is used in the work.
Corner lower cabinets under the sink bowl provide deep and spacious spaces. They have plenty of storage space for dishes, pots, and pans.
The roof of the upper cabinets (provided that the furniture consists of two rows) is used for displaying original miniature plants, family crafts, and various decorative items.
The open shelves of the set are used to place jars of spices, original decorative bottles and much more.
The most popular kitchen furniture are corner sets. The convenience of placement in space, the possibility of creating additional work areas and storage places, and finally, the beauty and elegance of their execution, have won the love of the owners of both spacious kitchens and modest-sized rooms.
How does it look in the interior?
The corner location is suitable for any style: from delicate Provence or strict classics to modern minimalism. To prevent plumbing fixtures from attracting unnecessary attention, look for models that match the color of the countertop - this option is considered optimal.
The photo shows a double sink with a wing
The mixer deserves special attention. The taps are placed in such a way that all family members can reach them. The color and style of the faucet depends on the style and color scheme of the interior - for classics there is bronze with wings, for high-tech there is shiny chrome with a rotary handle. There are not only metallic shades: matte black is acceptable in loft, and snow-white in scandi.
The photo shows a design option for a small kitchen
There are only two opinions on the topic of a wet zone in the corner: some consider this method convenient, others consider it not ergonomic. The difference between the first and second is only in how the kitchen is equipped.
