7 ways to decorate wedding glasses with your own hands


Sequins and beads

You can complement acrylic paint with multi-colored sparkles. Mother-of-pearl pieces of stars perfectly reflect light, creating the illusion of magic. This miracle is then pleasant to observe in family photographs. The same as rhinestones. The latter set off the drink itself, wine or champagne. They tempt guests with a spectacular scattering. The range of rhinestones is also rich in choice. However, in combination with a pattern, even the smallest pebbles can make a revolution. The sequence of actions is as follows:

  1. A decorative flower is glued to the center of the glass;
  2. Then come the remaining parts of the plant that have aesthetic value;
  3. Then it’s the turn of the beads. Using half beads is the “correct” method.

Since this allows not only to make repairs in the house, but also to make the most efficient use of the area of ​​​​the glasses.

Decor of wedding wine glasses with ribbons

Wedding glasses decorated with ribbons look cute and gentle. This decorative element can add a festive touch to any wine glass - sometimes it’s enough to tie a ribbon on the top of the stem to turn ordinary glassware into a real wedding attribute. Below we will consider the option of independently designing a wedding attribute using polymer clay and elegant satin ribbons

Such wine glasses will be a wonderful decoration for a wedding celebration; their unique decor will certainly attract the attention of all those present.

Necessary materials

  • Glasses.
  • One stick of white polymer clay (color can be chosen as desired).
  • The outline on the glass is white.
  • The outline on the glass is lilac.
  • Dry pastel (white, lilac).
  • Large beads.
  • Small beads.
  • Superglue gel.
  • Thin satin ribbons in snow-white and lilac shades.
  • Alcohol or acetone.
  • Stationery knife.
  • Nail scissors.
  • Paper.
  • A pin with a ball head.
  • File.
  • Brush.

Stages

Wipe the surface of the wedding item with alcohol to degrease. Rinse with water, then dry, wipe the future wedding wine glass until it squeaks with a soft cloth. Cut pieces of equal width from a stick of polymer clay. Cut the resulting circles again into several equal parts - these are future flowers. To make the base for the flower, take one cut piece of polymer clay, roll it into a ball, then press it onto the surface of the paper. The required base thickness is approximately 1.5 mm, no less. If the clay is too fresh and sticks to your hands too much, rub a little pastel with a nail file, then roll the parts in “flour” - they will not stick to your fingers or paper. Next, roll five balls one by one (for five petals), press them to the paper, then place them on your palm. To create the petal, take a round-headed pin and roll out a piece of polymer clay in a circular motion from the center to the edges. The thickness of the finished part should be about 0.5 mm. To form the final petal look for the wedding glass, lightly pinch one edge to create an angle. Carefully attach the petals to the base. It is better to do this with a toothpick so as not to damage the delicate flower. Make several half-opened buds. To do this, take three petals and carefully mold them together using a toothpick. To make the wedding wine glass richly decorated, make small buds like lilac flowers that are just beginning to open. First make a ball, then roll it into a droplet. When ready, use nail scissors to cut the top of the drop in half, and then the halves themselves. Place all the finished flower decorations in the oven to bake for a quarter of an hour at 110 degrees. Let cool in open oven

Next, use superglue to attach the resulting decorations to the wedding item - it is important to create the right, beautiful composition. Take a nail file, rub pastels of both colors, mix. Using a brush, rub the resulting mixture into the petals, and then draw the veins with a purple outline. Using a white outline, draw patterns that you like

Complete the resulting drawings with lilac-colored details. Using a stationery knife, cut large beads and fix them on the surface of the wedding wine glass. There is no need to cut small decorative elements - decorate with them places that seem empty. Take two ribbons - white and purple. Fold them in loops as shown in the first photo. Insert one into the other, carefully tighten the knot so that the ribbons do not twist. Singe the edges (this will prevent the satin threads from coming apart and fraying), then glue the resulting bow to the leg of the wedding attribute. The beautiful wine glass is ready!

Photo

Looking through various ideas for creating wedding wine glasses with ribbons, it will be easier for newlyweds to come up with and implement their own option. Ribbons on the thin stem of a champagne glass look elegant, emphasizing its elegance, and decorations with ribbons and lace on the bowl look festive. Satin, silk, and tulle fabrics of different widths can be used.

Ribbons

They are often used for decoration because the process of creating a glass is very simple. You can take white satin ribbons of medium width and wrap them around the glasses. Next, we lay out and glue a small thread on top, on which white beads are strung (the color can be changed).

Beautiful wedding glasses made from satin ribbons are made by taking a narrow strip and gluing it to the glass, laying it out diagonally. In the same way, you can lay a ribbon of a different color (for example, scarlet) nearby.

We attach a flower or any other composition to the leg to hide the ends of the ribbons. It could even be a miniature heart - experiment!

Popular articles Baby bear in a white dress

Ideas for decorating wedding wine glasses with your own hands

When choosing decor for wedding wine glasses, future spouses are usually guided by their personal preferences and the theme of the upcoming event. If the heroes of the occasion are having a wedding in a certain style, the glasses must necessarily reflect it. For example, in addition to classic decorative elements, more interesting options can be used - twigs, dry leaves, shells, chains, feathers. The painting of wine glasses can also be unusual, which will emphasize the originality of the young couple.

Rhinestones or beads

To create a beautiful decoration of a wedding attribute using rhinestones or beads, the heroes of the occasion will have to do painstaking work - imperfections in the design of a wedding wine glass with small details will be immediately noticeable. The pattern created with the help of these decorative elements can be minimalistic or, on the contrary, rich, elaborate; newlyweds need to proceed from their own tastes.

Openwork lace

Lace is a delicate, airy material that seems to be created for a wedding. If the hero of the occasion gets married in a lace dress, then wine glasses decorated with this material will highlight her romantic, touching outfit. The stem of a glass, the base of a bowl, or its middle can be decorated with elegant fabric - each option looks interesting in its own way.

Decorative painting

Painting glasses is one of the most popular ways to decorate a wedding attribute, because the drawings allow you to realize any desires of the newlyweds and create incredible images. Based on their imagination, future spouses can come up with a unique design: draw graceful birds, frosty patterns or cute butterflies. A wedding wine glass can only be decorated with painting or additional decor - ribbons, lace, rhinestones, beads, engraving.

Useful master classes

To better understand this or that technique, you should study master classes from professionals.

See alsoBamboo in the interior - use cases

Original glasses in the style of “Bride and Groom”

This type of design has become increasingly common lately. Styling glasses to match the image of the bride and groom is relevant and stylish. In addition, the design is considered quite simple to implement. The following materials will be required for the work:

  • glue gun and rods;
  • satin ribbons in black and white;
  • artificial flowers for decoration;
  • lace;
  • tulle;
  • beads and rhinestones;
  • scissors.

Masters advise starting work with a glass for the bride, as it is much more complicated. The skirt is usually made of lace. The waist can be emphasized with white beads or rhinestones. And on the top of the glass they place tulle, which creates a semblance of a veil. All decorative elements are attached with a glue gun.

When designing a wine glass for the groom, they also start with black lace, which imitates a tailcoat, and white lace, which imitates a shirt. The tie is made from black satin ribbon.


You can decorate glasses beautifully yourself; to do this, just watch the master classes of professionals


Currently, the design of glasses in the style of the Bride and Groom has become very popular.


It is recommended to start the decoration with a glass of the bride

See alsoOriginal decor with butterflies: photos, tips, materials

Decoration with fresh flowers

Fresh flowers are the most difficult material to decorate. Delicate flowers require special patience. So, let's look at each stage of the work in detail.

  1. Each flower is cut shorter and placed in water for several hours. It should be well saturated with liquid. The larger the flower, the shorter the stem should be.
  2. A specialized tape is attached to the glass. It can be found in flower shops.
  3. Each flower is taken from the water. A cotton wool moistened generously with water is applied to the cut site and secured with floral wire.
  4. The wrapped ends of the flowers are hidden behind the ribbon on the glass.
  5. To hide sloppy elements and bulges, beads, rhinestones, seed beads, and satin ribbons are used.

After finishing work, the products are sprayed with water and stored in a bag in the refrigerator. This way the glasses will retain a fresh look until the celebration.


Flowers are the most difficult material to decorate


Glasses with flowers will look beautiful and modern

See alsoDIY room decor: ideas, photos

Stained glass paints in decoration

Craftsmen use several methods to decorate wedding glasses with stained glass paints. For the first one you will need to prepare the following materials:

  • contour stickers;
  • stained glass paints;
  • thin brush;
  • satin ribbon;
  • glue gun

The contours for the stained glass window are separated from the base and attached to the glasses. The surface of the glass must first be degreased. The void between the contours is carefully, in an even layer, painted over with paints. After drying, tie a ribbon or glue a small flower at the transition of the glass to the stem.

The next method will appeal to those who like to draw. To implement it you will need a stencil, tape and the same materials as in the previous version.

A stencil, purchased in a store or drawn by yourself, is secured with tape in the inside of the glass. And on the outside, all the contours are well drawn with contour stained glass paint. It needs to be allowed to dry thoroughly for a few hours.

After this, you can remove the stencil and follow the steps described above. If the master is confident in his talent, then he can paint right away without stencils, relying only on his imagination.

The drying process can be accelerated using an ordinary hair dryer.


When using paint for decoration you need to be careful

You can speed up paint drying with a hairdryer.


The stem of the glass can be tied with ribbon

See alsoOld “suitcases” in interior design

Using ribbons and polymer clay

If you have free time and a desire to do small, painstaking work, then decorating wedding glasses with ribbons and polymer clay moldings would be an excellent option. For this work you will need to prepare:

  1. glass goblets;
  2. polymer clay set;
  3. special contour for glass. It is better to choose white and lilac colors;
  4. glue moment;
  5. beads of different sizes.
  6. thin satin ribbons 1.7 m long in white and pale purple;
  7. pastel in the same shades;
  8. degreaser (you can use alcohol).

Before starting decorative work, the glasses should be washed thoroughly and the surface should be degreased. It’s worth saying right away that you can’t do this with vodka, as it contains oils.


Ribbons are perfect for decorating wedding glasses

Before starting work, the glass should be thoroughly washed and degreased.

Now you can start creating flowers from polymer clay:

the clay stick is cut into pieces, each of which is divided into small slices - these will be petals;

  • make a small ball of clay;
  • roll the slices into balls and flatten them, the resulting petals are attached to the ball;
  • pastel is rubbed into crumbs;
  • during activities, so that the products do not stick to the fingers, they are dipped in pastel;
  • the finished flowers are baked in the oven for fifteen minutes at a temperature of 100-110 degrees (it is better to look at the recommendations on the packaging);
  • flowers are attached with glue to the stems of glasses;
  • pastel is rubbed into the surfaces of the flowers, details are drawn with contours;
  • the necessary elements on the glass are completed with an outline;
  • additional decor in the form of beads is glued.

After all these steps, the wedding glasses can be considered ready.


Glasses with red ribbons will look elegant and beautiful


Additionally, the glass can be decorated with beads


The stem of the glass can be decorated with small flowers

See alsoBottle decor with ribbons - luxurious, ornate, unusual

How to decorate wedding wine glasses with your own hands, master class

Glasses at a wedding are an important element of the celebration. They stand in the most visible place - the festive table and are constantly included in the frame during photo and video shooting. The wine glasses themselves, the number of which corresponds to the number of participants in the celebration, are an excellent decorative element in the overall festive decoration.

Therefore, their decoration should be treated with due attention. In addition, they are left as a souvenir and carefully stored for many years, and if the decor is made by the hands of the newlyweds themselves, the value of such a wedding item increases

“How to decorate wine glasses for a wedding with your own hands?” - a question that a person preparing a wedding ceremony asks himself.

We decorate wine glasses with rhinestones ourselves

Exquisite decor can be made from small rhinestones, transparent or multi-colored. Decorating with them is the easiest way to decorate glasses. To do this, you only need glue and the rhinestones themselves.

You can use them to put on a glass:

  • initials of the bride and groom;
  • hearts;
  • woven rings.

Or other wedding symbols, as shown in the photo:

Decorate with lace

It looks very attractive and elegant, as it resembles a bride's outfit. To work you will need a lace ribbon, satin ribbons of different colors, several beads or rhinestones, and glue.

Step-by-step instructions consist of three stages:

  • a piece of lace is glued to the edge of the glass;
  • a narrow satin ribbon in the form of a spiral is attached to the leg;
  • A bow is made from a satin ribbon, which is also fixed on the leg and decorated with a bead or rhinestone.

It turns out a beautiful glass, as in the picture:

Artificial flower petals

Of course, flowers should be present everywhere in wedding paraphernalia, and glasses can also be decorated with them, in this case using petals. For decoration you will need: a narrow satin ribbon, an artificial flower, Moment glue, alcohol or nail polish remover.

The master class on making decor is simple:

  • degrease the surface of the glass with alcohol;
  • disassemble the artificial flower into petals;
  • glue the petals onto the surface of the glass in the shape of a flower;
  • Attach a ribbon bow to the stem of the glass.

The result is a very airy, elegant wine glass.

It is especially worth mentioning which glue is best to use, since not every product is suitable for working with glass. The most popular is super glue for glass. Lace or feathers are glued with PVA. For this type of work, it is also recommended to use a glue gun.

Editor's choice: Photo booth for a wedding, what is it for?

Feather decoration

Multi-colored feathers are glued either to the base of the glass or to the stem itself. They also look good in combination with ribbons and rhinestones: an original combination using these materials is created on the surface of the glass.

Ribbons - a way to decorate wedding wine glasses

One of the simplest ways to decorate wine glasses, which does not require any special artistic skills. A satin ribbon is simply wrapped around the stem of the glass and secured with glue, or a bow is made. A more complex decorative element is a flower made from ribbons that is glued to the surface.

Glass painting

This is a complex type of design that can be done by a person with drawing skills. However, it looks very impressive, so it’s worth trying to draw at least the initials of the newlyweds on the glass. For painting you will need: stained glass paints, solvent, brushes, contour paint, napkins, toothpick.

Having prepared everything you need, let's get to work:

  • the surface of the glass is degreased with a solvent;
  • the outline of the design is applied with a brush;
  • the glass dries for about three hours; if there are any uneven contours, they are cleaned with a toothpick;
  • When the contour paint has dried, we begin to apply the design with stained glass paint, then leave the glass to dry for 24 hours.

Editor's choice: A wedding without witnesses, how to hold it

From polymer clay

In childhood, everything was sculpted from plasticine, and polymer clay is somewhat similar to it. This method opens up great possibilities for decorating glasses. To work you will need polymer clay and glue.

The manufacturing principle is that a flower is molded from clay. To do this, a sausage is formed, which is cut into thin disks - future petals; Then, using glue, they are fastened together in the form of a flower. After firing in the oven, the resulting decorative element is fixed on the stem of the glass.

All the proposed options for decorating glasses can be done with your own hands. The more complex ones are painting and modeling from clay, but after carefully studying the technology and watching an additional video, it will not be difficult to cope with this task.

Is decorating glasses for a wedding a waste of time?

It has long been a tradition for the bride and groom to drink from beautifully decorated wine glasses. But is it worth spending time on such delights if the life of these accessories is so short? And indeed, the glasses are destined to be broken literally in the first half hour of the ceremony. It is believed that glass flying into pieces should bring happiness to a young family. Beautifully done decoration of wedding glasses with your own hands is not a reason to abandon the ritual. Beat them to health! Just use a trick and prepare a couple of sets, perhaps even variously decorated, wine glasses. The surviving pair will make a great souvenir. You will appreciate the importance of accessories when celebrating your first wedding anniversary, and over the years, these handmade wedding glasses will become family heirlooms.

DIY wedding glass decor

Ideally, you should make at least three sets of festive wine glasses. The first one will be used in the registry office, the second one can be taken with you to a photo shoot, and the third one will be waiting for the newlyweds on the formally served table.

If you are planning a small party, you can also decorate the guests’ wedding glasses.

Naturally, the decor here will be simpler, but in this situation the attention shown must be assessed. Those present will be incredibly pleased to lift the decorated wine glasses with their souls.

Decoration of wedding glasses for guests

But let's return to the paraphernalia for the bride and groom. For them, it is absolutely not necessary to take glasses of the same shape. A young wine glass may have a more rounded shape. For the groom, an elegantly formal glass, thin and tall, is suitable. But the decor of the couple should be kept in the same style. This will emphasize the harmony of the union.

Decor options

The decor of the wedding table should match the mood of the newlyweds. You can emphasize the atmosphere of tenderness and restraint in the design. To do this, you can choose suitable colors such as blue or peach.

Lovers of splendor can choose a design in bright colors with appropriate decorations and attributes.

Flowers

It is simply impossible to do without flowers when decorating a festive table for a wedding. A common option is when the main bouquet is placed in the center, and its modest “copies” are placed on other tables.

The background can also be decorated with appropriate colors. For example, flower garlands are suitable for this. In winter, coniferous plants with cones can be used to create a composition around the wedding table.

Fresh flowers can be replaced with artificial ones, for example, made of plastic, fabric or paper. If you illuminate them with LED lamps, you will be able to give the composition a rich and sophisticated look.

When creating bouquets and flower decorations, it is important not to overdo it with additions such as ribbons and beads. This can make such decoration too heavy, or even tasteless.

As for the use of specific varieties of flowers, recently traditional roses and lilies are increasingly going out of fashion. If they are used, it will not be in the form of the usual bouquets in vases, but as an addition to a climbing branch on the table.

Textile

Decorating with textiles sometimes becomes the basis for creating the entire wedding table composition. Fabrics are used to decorate the space behind the young couple, the table and chairs. The volume is set using various flounces and folds, emphasizing the features of the fabric and its beauty. Drapery can play a key role in the perception of where the newlyweds are seated.

To create airiness, you can use fabrics such as nylon, organza, chiffon and the like. Natural fabrics such as linen or cotton will be good. Sometimes even burlap is used. It perfectly complements the atmosphere of the wedding table, decorated in a rustic style in accordance with the overall thematic direction of the wedding.

For a table that is decorated in a classic version, a lace fabric is more suitable. Lace fabric looks very elegant, especially if it is used to make a “skirt” for the table. Under such material, another is usually placed, acting as a bottom layer. Thanks to this, the table is more convenient to use, and the legs of those sitting are not visible through the lace.

When choosing lace fabric as the main one, you need to make sure that lace elements are present both in the design of the bride’s bouquet and in the decor of the newlyweds’ glasses.

If you want the use of lace to be only “dotted” through the decoration of a place for a feast, you can limit yourself to using it in napkins, in the design of vases and baskets, and so on

It is important that such elements fit well into the overall surroundings

Candles

Using candles to decorate your wedding table is a very good way to create an atmosphere of intimacy or mystery. They don’t even need to be lit until a certain point, but the desired impression will already be largely achieved.

Decorate the table well with candles of different sizes, decorated in the same spirit. There are many options for candles today. You can buy them in a store or order them from a craftsman who makes handmade candles. Candles can be of different diameters and heights, colors and designs. They should be placed on stable surfaces (candelabra and platforms) that can prevent wax from getting on the tablecloth or igniting a flame if they tip over.

A good solution would be to use candles, which are essentially LED lamps. They can eliminate the need to take special fire precautions when the table is decorated with materials that can easily ignite. Such lamps look very elegant. Sometimes they cannot be distinguished externally from natural candles.

Many people consider using scented candles a good option, but one must keep in mind that some people may have a negative reaction to these very scents or the smell will simply quickly begin to interfere. It’s easier not to use such candles at all or to light them only at a certain moment and for a very short time.

Balls

Balloons often become an attribute of weddings. They make interesting shapes in the form of arches, wedding rings and bouquets. Such aerial compositions are traditionally placed behind the newlyweds’ table. They can also be used to decorate the space in front of the table.

The colors of the balls are chosen in accordance with the overall color scheme of the holiday.

Preparing materials and tools

To decorate wedding glasses you will have to prepare certain tools and materials. Their selection largely depends on the chosen design idea.

Don't be afraid. Decorating wedding glasses is interesting and exciting. There are many ways that are available to people who have nothing to do with creativity.

When choosing a technique, you should not grab the most complex and painstaking one, especially if you have not heard of it before. First you need to watch the master classes and study the necessary information. It is important to make sure that all accessories are available for the novice craftsman. It is recommended to ensure that the wine glasses fit into the overall design of the room and suit the style of the newlyweds. Some decorate exclusively the glasses of the bride and groom, while others decorate them for all guests. This is a matter of taste, desire, time and material capabilities.

Standard materials and tools that may be required include:

  • acrylic or stained glass paints;
  • glitter in jars or any sparkles;
  • ribbons;
  • lace;
  • original ribbons;
  • various beads, seed beads, rhinestones;
  • dried flowers or artificial flowers;
  • glue gun;
  • PVA glue.


First, you need to decide what material the glasses will be decorated with.

Decorating glasses is a very interesting and fascinating process.


You can decorate glasses beautifully without special knowledge in this matter.

See alsoWedding hall decoration photo

Decoration techniques

You can find out in more detail what is required for creative work by studying the features of the technology you are interested in. Many of them are shown in the table.

Name Description Tools
painting One of the most affordable ways to decorate. Its difficulties come down only to the drawing skills of the master. You can depict floral and plant ornaments, wedding-themed images (rings, doves, silhouettes of newlyweds), and inscriptions on the surface. Acrylic paints (they are considered the most durable and do not wear off), any glitter, permanent markers for drawing on glass.
Stained glass Stained glass paints will allow you to create unique glasses. The glass can be easily painted in different colors, and thematic elements can be painted on top. If necessary, you can use special stencils. Stained glass paints, acrylic for painting, brushes, stencils.
Sequin decoration It will be much easier to decorate the wine glasses with crumbly glitter. They are sold both in cosmetic stores and in stationery stores. To decorate glasses, just coat the desired areas with glue and cover them with glitter. Once dry, excess can be shaken off. Glue stick, glitter, brushes.
Ribbons Such works look expensive and original. The most affordable option may be to tie a bow at the base. You can also make roses and flowers from ribbons, which are securely attached to a glue gun. The decor can be supplemented with beads, rhinestones, and lace. Ribbons, scissors, glue gun, additional decor if necessary.
Lace This option will add tenderness and romance to your inventory. You can actually make original skirts for the stems of a glass from lace ribbons. Wine glasses in lace mesh will look stylish. The process is quite simple. To begin with, the material of the required size is cut with a margin of a couple of centimeters. The lace is coated with PVA glue and attached to the glass. After a few minutes, excess glue is removed with warm water. Additional decorations can be attached using a glue gun. Lace, PVA glue, scissors, warm water, glue gun, additional decor.
Braid Glasses decorated with gold or silver ribbon look minimalistic and stylish. You can simply carefully wrap the glass in a spiral. The wine glasses will look very elegant. Or a shiny lace can be wrapped tightly around the leg. Glue, tape.
Beads All small accessories such as beads, beads, and rhinestones are actively used to decorate glasses for a celebration. With their help it is possible to create any ornament. The drawing can only be limited by the imagination of the master. It is recommended to use silicone glue or a glue gun for fastening. Beads or any small fittings, silicone or glue gun.
Flower petals Natural flower petals, of course, will not work, as they are very short-lived. But artificial ones are a great option. It is enough to glue the petals in the desired composition onto the degreased surface of the glass in any convenient way. They can be glued in several layers. Using a transparent outline, you can then apply a pattern that imitates dew. Petals, glue, additional decor, silicone or transparent outline.
Natural flowers Wine glasses with natural colors will look fresh and original. It is better if they are combined with the bride's bouquet. But it is worth noting that the work will be long and painstaking. In addition, you will have to decorate the dishes immediately before the wedding celebration. Fresh flowers, cotton wool, water, floral tape, plant glue.

Whatever technique is chosen, the activity will require accuracy in all details. It is required to approach the choice of materials and especially glue very responsibly. It must be of high quality and invisible on the product.


There are several techniques for decorating glasses

Choose quality materials for decoration

See alsoFlowers on the balcony: design, new ideas and photos

Glass in the form of newlyweds

The most original and not yet hackneyed option is considered to be glasses in the suits of the bride and groom. It will look very beautiful if everything is done to match the suits of the newlyweds, for example, using a strict classic dress code.

A combination of fabrics and textures would be appropriate here. You can use a variety of lace, ribbons or mesh fabric to make your glasses look truly festive.

In order to make the groom's glass, you will need two ribbons of different colors: white and black. Wrap the glass with ribbons. It should look like a shirt. Tie a butterfly bow on top.

You can make buttons from regular star-shaped sparkles. If you find real buttons in the small size you need, you can use them too.

For the bride's glass, you also need to make a veil. To do this, attach fabric or mesh material on top, like a veil. Bead decoration is allowed. If desired, you can glue more rhinestones.

The second option for decorating glasses with ribbons with your own hands is a glass with a dress. It is necessary to make a skirt on the bottom of the glass so that it visually resembles a dress.

How to choose the right option?

When ordering decorations for wedding glasses, young people sometimes “get their eyes wide open” from the abundance of luxurious and stylish options

To make the right choice, you should take into account a number of basic recommendations

Popular articles Making a beer keg

The design of the wine glasses should be optimally integrated into the overall theme of the wedding celebration. If you are holding an event in a rustic style, then the wine glasses can be draped with burlap

If the design is carried out in the traditions of vintage and shabby chic style, then you should give preference to lace, ribbons or cameo. It is very important that the color scheme of the glasses is in harmony with the main shades that prevail in the decor of the room where the celebration is being held. Shade palettes must match; the use of contrasting shades is strictly prohibited

For example, the orange decor of the wine glasses is unlikely to fit into a silver or lilac wedding, and gold in the dishes will look out of place with a silver shade of the room.

Let's talk a little about glasses. Their shape should be quite beautiful and comfortable, since the young spouses will have to hold them in their hands for quite a long time.

Traditionally, wine glasses with an elongated thin stem are used, although you can choose some other options. For example, paired wine glasses on one common stem are quite popular - they, in fact, represent a rather attractive stand with a pair of recesses into which glasses are inserted. If desired, you can give preference to hexagon-shaped glasses, concave glasses and other original products.

Decoration with rhinestones, beads and sparkles

Those who chose rhinestones or sparkles were not mistaken! Because it is with this consumable that the completed result looks solemn, advantageous, and festive. The pattern on the glass should ideally repeat the pattern of the wedding dress or imitate any other fancy, but not too tacky, ornament.

In this case, either the upper part of the bowl or one side wall should remain undecorated! Simple decor for glasses is made with one or two-color material, laying out random monograms, simple curls, hearts, names, outlines of flowers... It is advisable to print more complex options on paper, attach them from the inside and lay out rhinestones on them. “Scattering” the rhinestones in a chaotic manner, you should almost completely cover the dishes from below with them, and place only individual droplets at the edges.

Decorating with sparkles is much easier. To repeat your favorite “ Do it yourself wedding glasses” photo

, with a fairly thin brush dipped in glue, draw a pattern, design, generously sprinkle it with glitter, finally shaking off the excess onto a clean sheet of paper, and wait for it to dry.

Rhinestones, beads, sparkles and other decorative elements are attached to glasses using different types of glue. Firstly, it must be environmentally friendly (if possible); secondly, it should not be visible. In addition, the beads can fall off (during transportation, use, etc.), so their fixation must be strong.

When deciding how to glue the material chosen for decoration, you should choose silicone or PVA glue, a glue gun with “liquid” nails. It is advisable to exclude the choice of cyanoacrylate glue and take a special one for crystal or ceramics. The glue is applied with a very thin brush or sewing needle. And the excess is removed with gentle solvents.

How to decorate glasses with your own hands (+40 photos)

Glasses for a wedding are no less important than the bride’s bouquet, cake or hall decor.
Even if it’s only for a few minutes, everyone’s attention is riveted on them. Unlike everything else, they can be stored for a long time, taken out for each wedding anniversary. Future newlyweds can entrust the design of champagne glasses to a specialist. But it is much more interesting for the bride to do it with her own hands, at the same time demonstrating her needlework skills and good taste. With patience and accuracy, you will get real works of art.

The tradition of breaking champagne glasses for good luck is gradually becoming a thing of the past. But you can design several pairs with your own hands. The newlyweds drink from one in the registry office, from the other during the feast, and the third, the simplest one, can be broken.

Registration requires strict adherence to several rules:

  • Before starting work, wash the glasses until they shine and wipe thoroughly with alcohol or acetone to degrease the surface.
  • Wash your hands and keep wet wipes nearby.
  • Use different glue for different decorative elements. PVA glues ribbons, lace, feathers and fabric well. For small sparkles, beads and rhinestones, cyanoacrylate-based glue is suitable. Large beads can be securely fixed with liquid nail glue or a gun.

Remove glue stains by wiping with acetone or solvent. For small droplets, use a toothpick, cotton swab or needle. Good lighting is important, otherwise you won't notice small imperfections.

Serving a loaf at a wedding: an ancient tradition

Despite the change in the attitude of modern people to bread, you can buy a fresh product in any store; bread is still used as a ritual dish. At Easter, many housewives bake Easter cakes and ears of bread, fruit bread for Christmas and loaf for a wedding - this is more than just bread. Sacred symbols of important events and great holidays, they become an obligatory part of some rituals. Such bread was always skillfully decorated, and with certain symbolism. The beautiful Russian loaf is replete with various decorations. Each detail has a certain meaning and significance; many decorative elements are designed to appease higher powers, ask for a blessing or show your respect.

Photo of wedding loaf decorations

Bread for a wedding was always baked in a round shape - in honor of the sun, symbolizing happiness, life and goodness. A large wedding loaf was baked, because according to custom there were several stages of dividing the bread:

  • The newlyweds were the first to bite into bread;
  • the middle part was distributed to the guests;
  • the lower part is for musicians;
  • whatever was left was given to the poor waiting at the gate.

Thus, the young people seemed to share their happiness with those invited, whose gifts were gratitude for this benefit. Guests took pieces of the loaf home and shared it with their household, thereby sharing happiness. The newlyweds had to salt a piece of bread, thereby eating up all the salt of future tears, especially for the bride.

The ancient Slavs called wedding bread a loaf - it was most often round, large enough bread to serve to all guests. A special meaning was invested in such a treat, since even special people were involved in its production, the flour was ground on special millstones, and all this was accompanied by prayers and special rituals. It was a symbol of a happy life, prosperity and prosperity.

The loaf has not lost its relevance today. The groom's parents meet the newlyweds at the doorstep of the house with bread on a towel and icons, thereby blessing the young family for a long, happy life. The wedding ceremony does not set strict limits in this case. Some parents are holding bread, some are holding icons. Both parents say parting words.

Photo of a beautiful loaf

Not only the symbolism of decorations is important on wedding bread. On top of the loaf there is a place for a salt shaker. This can be simply a depression in the dough where salt is poured, and there is also a place for a salt shaker, which can be either glass or wooden with painting. They bring out a loaf of salt to the young people; it is not for nothing that in Rus' from time immemorial they greeted dear guests very magnificently and offered them a taste of bread and salt.

Today, the signs and customs that accompany a wedding say that whoever bites off the largest piece of bread will be the head of the family. Previously, girls did not strive for dominance, the husband was the breadwinner, the breadwinner, and it was he who was assigned this role, and the wife took care of the housework and children, but times have changed. You are also allowed to break off the loaf with your hands to take a piece for yourself.

This could be the wedding palace, the entrance to the restaurant or the beginning of the banquet. There are no strict rules here, so everyone decides where and how the bread will be taken out.

A loaf at a wedding means the first bread shared by the newlyweds. This is the first step of two young people starting their journey together. They have to live a long life, overcome many difficulties, and raise children. But at the beginning of this interesting journey is the wedding day and the first piece of bread together.

How many loaves should there be at a wedding?

Photo of a festive loaf

If there is a wedding ceremony, then there should be four loaves:

  1. The first loaf is baked for matchmaking. With this bread, the matchmakers go to the bride's house.
  2. Next, the loaf will be needed to bless the newlyweds after the bride ransom.
  3. The third bread is needed to meet the newlyweds after registration. This loaf is held by the groom's parents.
  4. The fourth is usually presented after the wedding ceremony.

Expert advice

Of course, creating important attributes for a wedding is very exciting. But in the process of decorating, a lot of pitfalls can emerge that can ruin the whole job. For this reason, you should familiarize yourself with some advice from professionals in this matter.

  1. In order for the result to look neat, without pieces and threads of dried glue being visible, it is better to choose a special glue for glass and ceramics. It is distinguished by the fact that it hardens in a matter of seconds and has an absolutely transparent color. Silicone can be an excellent analogue of such a material.
  2. Many craftsmen prefer to use cyanoacrylate glue to attach the decor. It fixes beads, rhinestones and other small elements especially quickly. Its main advantage is that it is not afraid of moisture. You can really find it in any store selling construction supplies.
  3. PVA is often mentioned in master classes. It is well suited for decoupage and decoration with textile materials. It also leaves almost no residue. If inaccuracies do appear, they can be eliminated with alcohol or warm water.
  4. Before you start decorating wedding wine glasses, you should try out the chosen technique on any unnecessary dishes.
  5. Glasses should always be washed and dried well before use. Any remaining dirt or fingerprints can lead to the decor simply falling off at the most inopportune moment.
  6. After completion of the work, the glass can be coated with colorless paint or varnish for glass surfaces. This will hide all the imperfections in the work and make the decorations stick more firmly.
  7. Glass decorations can be purchased much cheaper at office supply stores or sewing supply stores.
  8. In order not to waste money on unnecessary materials, it is recommended to clearly decide on the technique in advance, think through each step and write a list of everything you need.

To make the glass beautiful in the end, choose glue for glass and ceramics

Before you start decorating, the glasses should be thoroughly washed and dried.

A wedding is one of the most important events in the life of a couple in love.

In order to leave as many pleasant memories as possible from this event, you should not neglect the decor and decoration of the holiday. Glasses are what will be in the hands of the heroes of the occasion throughout the day

Therefore, wine glasses must be exclusive. And it’s better to make them yourself.

Such handmade products will appeal to all guests and will be kept in the family home for a long time. The main thing is to choose the most suitable and affordable method for decoration. If you have time, you can decorate glasses for guests too

It is important to consider that glassware for sparkling drinks should not stand out from the overall composition

How to decorate glasses with your own hands (+40 photos)

Glasses for a wedding are no less important than the bride’s bouquet, cake or hall decor. Even if it’s only for a few minutes, everyone’s attention is riveted on them. Unlike everything else, they can be stored for a long time, taken out for each wedding anniversary.

Future newlyweds can entrust the design of champagne glasses to a specialist. But it is much more interesting for the bride to do it with her own hands, at the same time demonstrating her needlework skills and good taste. With patience and accuracy, you will get real works of art.

The tradition of breaking champagne glasses for good luck is gradually becoming a thing of the past. But you can design several pairs with your own hands. The newlyweds drink from one in the registry office, from the other during the feast, and the third, the simplest one, can be broken.

Registration requires strict adherence to several rules:

  • Before starting work, wash the glasses until they shine and wipe thoroughly with alcohol or acetone to degrease the surface.
  • Wash your hands and keep wet wipes nearby.
  • Use different glue for different decorative elements. PVA glues ribbons, lace, feathers and fabric well. For small sparkles, beads and rhinestones, cyanoacrylate-based glue is suitable. Large beads can be securely fixed with liquid nail glue or a gun.

Remove glue stains by wiping with acetone or solvent. For small droplets, use a toothpick, cotton swab or needle. Good lighting is important, otherwise you won't notice small imperfections.

Classic glass shape

The most classic type of glass is the flute-shaped wine glass. This is a “style icon” in the corresponding category. These glasses are great for traditional events and will fit perfectly into the format of any of them. Externally, such a glass resembles a narrow bowl on a high or medium stem. This shape allows the bubbles to “play” as they rise from the bottom to the surface.

However, true gourmets of this sparkling drink are unlikely to appreciate this glass due to the inability to present the entire bouquet of aromas in full glory. This is due to the small surface of the glass, which does not allow the bouquet to open completely. However, this is not a problem for young wines. If you have purchased an expensive, aged sparkling wine, consider other types of glassware to properly present it.

Wedding table decorations

The wedding table is a real work of art. The chefs not only prepare delicious dishes, but also decorate them perfectly. But this does not detract from the role of the designer in creating the inherent color of the wedding.

How to decorate wedding glasses?

Fashionably decorated glasses for the bride and groom do not surprise anyone. Rather, their absence causes misunderstanding. The retail chain offers a large amount of beautiful tableware.

Decor of wedding glasses

It's easy to decorate glasses with your own hands. Traditionally, tall wine glasses are used. It is enough to fix several compositions on them with colorless superglue to give a stunning look:

Rhinestones and sparkles against a background of white flowers and fabric leaves never go out of style. The smaller the drawing, the more delicate and modern the composition looks.

Wedding glasses decorated with rhinestones

Glasses designed to match the wedding style look stylish. The color scheme repeated in the table decoration will be a good holiday decoration.

Glasses in a single wedding design

Wrapped several times with ribbons of one or two colors with the ends beautifully secured in a bow, such glasses, despite the simplicity of their design, look stylish and beautiful.

Wedding glass decor with ribbons

An interesting result is obtained by lace attached to the glass, decorated with beads and rhinestones on top. Additionally, you can place a couple or three of delicate flowers in a tone corresponding to the color of the wedding.

Delicate decor of glasses with lace

An excellent option for decorating glass: Take the thinnest ribbons and wrap the glass several times. We secure all the parts with a glue gun and install rhinestone rivets. We tie a bow beautifully on the leg.

Neat bows on the stems of glasses

Those who have at least basic skills in drawing with paints on glass can fully demonstrate them when decorating glasses. Just imagine: wedding wine glasses covered with a white pattern reminiscent of lace; the glass has a pattern of delicate spring branches with newly blooming flowers. If your design is not expressive enough, a bow tied on the leg will save the situation.

Painting on wedding glasses

An excellent and original idea: decorate wedding glasses with delicate small fresh flowers that match the color of the bride’s bouquet.

Wedding glasses with fresh flowers

The petals, arranged according to the design principle of a natural rose bud, attached to the glasses with glue, look beautiful only when fresh. But the result will be admired.

Decor of wedding glasses with rose petals

When working with the material, pay attention to securing the ends of the satin ribbon; it is recommended to treat them with fire

How to decorate wedding bottles?

At the celebration, two bottles of alcohol are traditionally placed in front of the bride and groom. According to tradition, one of them opens after a year, the second - on the birth of the first child.

There are several options for their design:

Allows you to tie the alcohol with a bow to match the color scheme of the wedding and get an impressive decorative element.

Bow for decorating a wedding bottle

Bottles dressed up in the costumes of the bride and groom look beautiful. Especially if the style of the costume repeats elements from the clothes of the heroes of the occasion.

Wedding bottles “bride and groom”

Nowadays, making beautiful wedding labels for bottles is not difficult. Want to leave a lasting impression on your wedding? Place champagne with specially prepared labels on the table. For example: Ivanovo champagne, Champagne from the Kuznetsovs. If the picture shows a photograph of the newlyweds, you will not find a single empty bottle after the holiday, even for yourself as a souvenir.

Champagne with wedding labels

The bottles on the newlyweds' table can be decorated to match the style of the bride and groom's glasses. You don’t have to be afraid to go overboard with decorations; alcohol on the newlyweds’ table is interesting only to the heroes of the occasion and does not greatly affect the overall style of the holiday.

Wedding glasses and champagne in the same style

Decorating the hall with garlands

In order to make paper garlands with your own hands, you will need a sewing machine. Prepare circles cut out of paper of the same diameter and matching each other in color. Take a strong thread and use a sewing machine to connect all the elements into one garland. Leave empty spaces between circles. Attach the resulting structures to the ceiling.

Decorating the wedding hall with garlands

Decoration options

Various techniques are used to decorate wine glasses for a special wedding with your own hands. This is decoupage, glass painting, decoration with elements made of polymer clay. Each technique has its own nuances. When choosing a suitable decoration method, you need to build on your own capabilities and the general idea of ​​the celebration. Next, the most popular decoration technologies will be considered.

Glasses Bride and Groom

At modern weddings, we often see wine glasses decorated in the shape of the bride and groom. All kinds of designs allow you to integrate them into any style of celebration. Moreover, this technique is very simple.

To create an original wedding attribute, you will need:

  • glue;
  • satin ribbons;
  • lace braid;
  • white tulle;
  • Swarovski crystals;
  • pearl beads;
  • black beads.

The bride's wine glass takes longer. The skirt is decorated with lace or tulle. Depending on the material chosen, you will get either an elegant dress or a lush one. A satin ribbon is fixed at the waist and above, serving as a bodice. Then rhinestones and pearl beads are added using glue. A veil made of tulle looks original.

The groom's glass is decorated with white and black satin, imitating a tailcoat and shirt. You can add a tie or bow tie to match your suit.

The classic version can be diversified with additional elements or a different color scheme.

Lace and beads

Lace is a delicate and elegant material that symbolizes purity and innocence. Wedding glasses decorated with openwork lace look light and solemn. The addition of pearl beads will look harmonious.

You will need the following materials:

  • lace ribbon;
  • glue gun;
  • transparent glue;
  • beads (optional).

Instructions:

  1. Wipe the surface of the glass with an alcohol wipe.
  2. Select the desired lace color and cut the desired length. Leave a couple of millimeters for allowance in advance.
  3. Glue to the glass.
  4. If you need to decorate the stem of a wine glass, the piece is gathered with thread and glued to the required place.
  5. Additionally, you can decorate with beads or rhinestones.

When decorating, the main thing is to observe moderation. It is better to choose no more than three types of material.

Feathers

Feathers add style and pomp to bridal glasses. This idea is suitable only for brave newlyweds. If you want creativity, then this is the most suitable option. Using bright colors will allow you to design the most unusual wedding.

To work you will need:

  • feathers to match the overall color scheme;
  • rhinestones;
  • ribbons;
  • glue.

Feathers are fixed on the wine glass with a spine. And the top part should be free. This will add airiness to the entire composition. The place of fixation is decorated with ribbons.

Rhinestones

The simplest option for decorating wedding attributes is using rhinestones. The sparkling stones shimmering on the glass surface look interesting, creating a festive atmosphere.

Small rhinestones look impressive, refracting rays with a large number of edges.

Rhinestones of the same color and size are chosen for a classic wedding. They are laid out in fancy patterns in the shape of the newlyweds’ initials, rings, doves, and hearts. A themed celebration involves a combination of bright colors and the use of stones of different sizes.

  • To work, you should first degrease the surface of the glasses, and then arm yourself with a glue gun and a set of rhinestones.
  • For convenience, masking tape is used to cover areas of the surface that, in theory, should not be decorated.
  • It is recommended to attach a ready-made stencil inside the wine glass and glue it with shiny rhinestones on the top surface.

The process should start from the upper parts of the glass, moving down. As you work, you can carefully move the elements until the glue dries.

Even a simple star scattering of rhinestones looks festive, and you can make a more complex design after practicing on glasses.

Confetti glass decor

“It looks very creative to decorate glasses with your own hands in the form of painting with multi-colored bright polka dots, especially if gold and mother-of-pearl elements are used in the mix”

Do you want to please your guests with an unusual table setting? Decorate their glasses at your wedding too! Wine glasses with small polka dots can diversify the festive atmosphere, making it uncontrollably cheerful or more respectable. You can paint the dishes with acrylic paints, nail polish, or a glass painting marker.

Champagne glasses are degreased and painted in accordance with your vision of beauty. You can cover their surface with circles of the same size and color, or go from small to large scatterings, not forgetting to play with the distance between the elements. Circles can be formed into a pattern. You can make a simple design out of them or layer them on top of each other. Decorating glasses with your own hands in the form of painting with multi-colored bright polka dots looks very creative, especially if gold and mother-of-pearl elements are used in the mix.

If you don’t want to mess around with paints, you can cover the wine glasses with confetti using vinyl self-adhesive. A hole punch will help you cut identical, regular-shaped circles. This is the fastest and most economical way to decorate glasses for a wedding in large quantities.

Rose petals

The romance of petals is one of the universal design methods. Decorating glass products with fresh flowers is somewhat cumbersome, since the material costs are hardly recouped. A wedding celebration only takes place one evening in a couple’s life. It is important that they are fresh, without an unpleasant odor. Raspberry and scarlet shades of roses are the absolute leaders in the accessories market. Fuchsia is also rapidly becoming fashionable. However, many people prefer field daisies. They have their own symbolism, and the price is not at stake.

Modeling decor

A very exciting job that can become a hobby in the future. Do-it-yourself decorative elements for decorating glasses are made from polymer clay. At the modeling stage it will be possible to view a sketch of the future design. Don't be afraid to apply the composition to the glass and correct any imperfections. As soon as all the details are sculpted, they are baked.

Before attaching decorations to champagne glasses, arm yourself with a wide nail file, carefully align the bases of your leaf flowers and open them with a layer of varnish. Now they are ready to decorate the glasses for the wedding. To complete the picture, you can add stems with a marker or add beads and rhinestones.

Rustic style

Rustic wedding decoration involves the use of simple fabrics and unpretentious decor, bordering on rustic naivety.

The event implies the absence of expensive details and connection with nature.

Newlyweds can make their own decorative items from branches, pine cones, dried bouquets of flowers, twine, moss, bark, twine, and aged lace. Instead of glasses, you can use tall glasses wrapped in rope.

For decoration, choose a color palette that is close to the shade of the earth, grass, and trees. If the groom is making doves and hearts from straw and branches, then it’s time for the bride to start decorating the glasses:

  • Degrease the glass surface with a cotton pad soaked in alcohol.
  • Using a glue gun, attach turns of thin rope or twine to the stem of the wine glass.
  • The upper part of the glass is decorated with a piece of burlap, and a strip of lace is glued on top.
  • The lace is tied with a rope and tied with a bow.
  • Attach homemade burlap flowers to the base of the leg.

The design of wedding paraphernalia depends only on the imagination of the newlyweds. It is advisable to decorate champagne and wine glasses in the same style.

Engraving

Only specialists are trusted to carry out engraving. The newlyweds can participate in drawing up the sketch and suggest text options for the design of the glasses. The engraving method differs depending on the thickness of the glass, and the complexity of the image is chosen based on the chosen ornament.

Thick glass will require a mechanical application method; to work with thin surfaces, laser engraving is chosen.

Mechanical application involves the manual work of a master, but the laser allows you to realize more ornate patterns that require maximum precision in application.

The workshop offers standard inscriptions and drawings, but it is better to think through the details yourself so that the wedding paraphernalia will delight you for many years to come:

  • unusual inscriptions;
  • placement of patterns on glasses;
  • additional decorative elements;
  • unique drawings;
  • On the leg you can indicate the date of the wedding.

It is recommended to apply figurines of swans or doves, initials of spouses, monograms and floral patterns to the glass. The most famous glass engravings are wishes for happiness, love, a better future, and abundance.

Decoupage technique

“This decorative technique is often used when decorating wedding bottles with your own hands.”

A very unusual way to decorate glasses for a wedding. You need to prepare:

  • rice paper (white);
  • decoupage napkin with a themed pattern;
  • pearl paint;
  • glue;
  • Polish for hair;
  • two-centimeter wide masking tape;
  • regular varnish.

We prepare the surface for decoration. Use masking tape to protect the edge of the bowl. We wrap the remaining part with rice paper so that it fits closely to the edge of the tape. The side ends of the paper are fixed with an overlap, with a wrap of no more than 0.5 cm. The excess wrapper is torn off.

The next stage of decorating wedding glasses with your own hands is fixing the paper to the surface of the glass. This is done as follows. The bowl is moistened with water and wrapped in paper. The paper will get wet and cover the glass evenly. All that remains is to fix it in this position by covering it with decoupage glue. It is applied with a flat brush. The base for decor is ready, and it is sent to dry.

This will be followed by colorful decoration of wedding glasses. We select the necessary fragments of the drawings and lay them out on a file or cling film. We treat the pictures with hairspray several times. This will promote better adhesion of the parts to the surface. Place the pictures one by one on the bowl of the wine glass and coat the top with glue.

At this stage of decorating wedding glasses with your own hands, you need to be especially careful. The pictures should not wrinkle or deform, so the glue should be applied from the center to the periphery and very short strokes should be made with a brush.

After all the elements are laid out and the glue has dried, the bowl of the wine glass is coated with glassy varnish and dried again. The glass is ready to use.

This decorative technique is often used to decorate wedding bottles with your own hands. Decoupage will make it possible to indicate the purpose of each of them. Don't understand what we're talking about? Whether wedding guests will drink from decorated bottles or not is a rhetorical question, but two beautifully decorated bottles must be on the newlyweds’ table. They will not be uncorked. This champagne has a different mission. The first bottle will be unsealed to celebrate the first wedding anniversary, and the second will wait until the birth of the first child. The theme of decorating wedding bottles with your own hands is intuitive. The one that is destined to be drunk on the occasion of a new addition to the family can be decorated, for example, with angels; the second one, it makes sense to veil it under fabric. Choose a small floral pattern to look like printed chintz.

Working with ribbons

Decorating wedding glasses with your own hands using ribbons is a springboard for unleashing your imagination. Both a modest bow and luxurious drapery can become a stylish decoration.

Usually, satin or silk ribbons are beautifully woven around the stems of wine glasses, but you can complicate your task and make flowers from ribbons. To make, for example, a rosebud, which, by the way, is also suitable for decorating wedding bottles with your own hands, you will need a large ribbon. It is folded in half, bending along the wrong side, and the joined edges are swept away. To form a bud, you need to pull the thread. You can put together a whole bouquet of these roses.

It is permissible to make the buds multi-colored. The compositions are fixed to the bowl of a wine glass. Decorating glasses for a wedding with ribbons is traditionally completed by decorating the latter with rhinestones and beads. They are used to embroider flower petals and make their cores. Thin, green ribbons or twisted thread can act as stems. To imitate drops of dew on flower petals, when decorating wedding glasses, they are decorated with small rhinestones.

The most effective bows are made from satin, gauze or silk ribbons.

With paints

In order to leave your own painting on glasses, you don’t need to study anywhere. A few practices before the wedding allow you to quickly master the meticulous craft. When performing work, you need to take care of the cleanliness of the glasses. Despite the wide choice, rich acrylic paints are the most popular. Before applying it to the surface of a glass product, the latter is degreased. Thanks to the careful preparation of the festive table attribute, the craftswoman draws exquisite designs with openwork elements. Subsequently, the product is coated with acrylic varnish.

Attention! Before applying varnish, you must wait until the patterns dry.

Stained glass translucent paints are also considered in demand. With their help, a unique decor is created, self-sufficient in its aesthetic properties. There is hardly any need to supplement the stained glass painting. In order for the symbolism of stained glass to please the owners for a long time, you need to use homemade glasses as little as possible. This is due to the fact that the image peels off easily. But with the use of multi-colored paints, it becomes possible to paint large-scale drawings.

Additionally, the legs are decorated with a spray can. Most of the glass is hidden behind newsprint, while the paint is sprayed in a matte hue over the delicate stem. It is convenient to use tape to secure it.

Other decor options

There are many other techniques for decorating wedding wine glasses. Among them are the following:

  • Using twine and wooden forms.
  • Stained glass paints.
  • Decoration with foil and gold paint.
  • Using kanzashi.
  • Decoupage technique.
  • Decorated with gold leaf, with contours and rhinestones.

The design of wedding paraphernalia depends on the taste of the newlyweds. You can show your imagination and create your own unique pair of glasses.

Wedding glasses with engraving

In addition to the fact that wedding glasses can be decorated in the style of the bride and groom, there are other options for decorating them with your own hands. Using the example of the next master class, we will show how you can put inscriptions on glasses, making them personalized.

Materials and tools:

  • glasses;
  • vinyl stencils;
  • glass etching agent, for example Satinglaas paste;
  • hot glue;
  • alcohol for degreasing;
  • white tape;
  • artificial flowers.

For the second option of glasses, instead of the last two points, you need to prepare a lilac ribbon and silver threads with beads.

Time: 30 minutes.

Detailed instructions:

  1. Wipe the bowls of the glasses with alcohol, degreasing them, and stick stencils on the glasses. Make sure there are no folds around the letters. Tip: you can buy stencils in a store or make it yourself by drawing letters on self-adhesive film and cutting them out with a stationery knife.
  2. Wipe the glasses again with alcohol in the area of ​​the stencils and apply glass etching paste to the holes with the letters. Make sure all holes are covered with paste. After a minute, wipe off the paste, this is enough to etch the glass and create inscriptions on it.
  3. Remove the stencils.
  4. To decorate the resulting glasses, cut a white ribbon 25 cm long and tie it at the base of the bowl of the glass, cut the edges of the ribbon in the shape of the letter “V”.
  5. For security, glue the tape to the glass.
  6. Cut the artificial flowers and glue them to the glass.
  7. Add a red rose to the composition.
  8. The glasses are ready!
  9. Engraved glasses can be decorated in other ways. Cut several pieces from the lilac ribbon: one 20 cm long and four 15 cm long. Tie a long ribbon at the base of the bowl of the glass, securing it with glue for security.
  10. Cut two threads with beads 15 cm long, put them together and four lilac ribbons. Tie them to the ribbon on the glass.
  11. Trim all ribbons to desired length.
  12. The glasses are ready!

Wine glasses in the form of the bride and groom

A special decoration of the wedding celebration will be festive glasses, decorated in the style of the bride and groom. Some people limit themselves to depicting a tuxedo and a wedding dress, but for a craftswoman it’s not difficult to create real wedding dresses.

The easiest way is to use tapes. Glue a black ribbon to the middle of the “groom’s” wine glass, add a bow tie and a white collar. The “bride’s” glass is decorated in a similar way with a white ribbon and a lace cut along the top edge. Satin bows should be attached to the legs.

Dressing the glasses:

  1. For work, prepare a small piece of black and white fabric, several small buttons.
  2. Measure out a strip of white shirt material to completely wrap around the glass. Sew a row of buttons to the fabric.
  3. Using a glue gun, the shirt is attached to the glass.
  4. Black fabric will be needed to cut out the lapels and bow tie.
  5. All that remains is to glue the prepared butterfly with the lapels of the jacket to the white fabric.

Popular articles Beautiful congratulations on the first Day of Spring

For the “bride” you will need to gather a piece of organza onto a thread, decorating it with a large bead or brooch. Cut a satin ribbon to fit the width of the wine glass and attach an improvised veil to it. The resulting accessory is placed on the glass, having previously been coated with glue.

The process of decorating wedding paraphernalia allows you to fantasize and combine unique decorative elements. Handmade decorations will carry a positive charge for many years on the most important day of your life - your wedding with your loved one.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]