Flowerpot concept
A flower pot dressed in new beautiful clothes, that’s what a flowerpot is. Translated from French, pots are “hidden pots.” This name, as accurately as possible, reflects the essence of the subject.
It often happens that housewives are afraid to replant plants or flowers so as not to damage the root system, and the pot has an unpresentable appearance. Then the position of the pot will be corrected, the plant will look new in the elegant “clothing” of the pot.
The difference between a flowerpot and a pot
Many people believe that a flowerpot and a pot are the same thing. In fact, these are two different concepts. A flowerpot is a decorative container, usually decorated in every possible way . And you don’t even have to put soil in it - you can simply place a simple pot of suitable size with soil and a plant inside the flowerpot. Typically, such containers are used only for interior decoration.
As for the pot, it can be either simple and unremarkable or very beautiful. And just inside it is placed the soil for the plant.
On a note! The pot must have drainage holes, while the flower pots may not have them.
Unlike a pot, the materials of which are subject to special requirements, a flower pot can be made from anything. The main thing is that the material is non-toxic and does not release substances hazardous to the plant into the air. Flowerpots can even be woven from branches or elements made of paper and fabric can be used to decorate them.
Pots from gift bags
One of the advantages of using pots without drainage is the ability to water flowers without worrying that water will flow onto window sills and furniture after watering. However, it is important not to forget that when irrigating the plants, you need to empty the pots of accumulated water. You need to remove liquid from it 15 minutes after watering. If this measure is neglected, there is a risk of root rotting.
Miniature pots made from wine corks
Most often, plant pots are made with your own hands. Let's see how you can make a container using available materials.
The ability to make something original and new out of unnecessary or ordinary things is very valuable when decorating a home. Decorating flower pots with your own hands - photo Flower pots with children’s faces
Types of flower pots
Flowers are grown in almost every home. This creates a beautiful, aesthetic interior, comfort, unity with nature. In addition, house plants enrich rooms with oxygen, which is of great importance, especially in a metropolis.
Flowerpots have different purposes according to the method of placement:
- floor planters are installed on special stands, sometimes multi-tiered;
- table pots decorate shelves, window sills, tables and cabinets;
- hanging flower pots, using ropes or wires, are attached to special hooks and suspended from ceilings and upper beams;
- wall planters are located in special holders attached to the wall.
Choosing flowerpots
Having set the goal of updating the interior, one cannot ignore updating the appearance of flower pots. Lack of your own imagination is not a reason to give up the idea of decorating pots.
It’s worth going to the sites of flower growers; design sites and catalogs with photos of flower pots will amaze you with their variety.
Even from scrap materials: plastic bottles, wood, rope and much more, lovers of applied art create truly masterpieces.
Which is the best flower pot to choose?
Indoor flowers, as an element of the interior, bring a variety of colors to it and complement the style of the room. There are many types of flower pots available in the market.
Clay or ceramics
Plants have been grown in ceramic or clay pots for several centuries. The advantage of earthenware, unless it is glazed, is that it is natural. Due to the presence of pores in this material, excess moisture evaporates through the walls of the pot, while the roots of the flower are saturated with oxygen.
However, now fakes made of gypsum have appeared on the market, which does not have such useful properties. You can distinguish products made from gypsum and clay by their sound: when you tap your fingernail on a plaster pot, the sound will be more dull than that of a clay pot.
Glass
Glass pots have not yet become widespread, as this is not the most suitable material for growing indoor flowers. Glass breaks easily and does not allow air to pass through. However, due to the transparency of the material, such flowerpots are well suited for planting orchids and those plants whose roots participate in the process of photosynthesis.
Plastic
Modern technologies make it possible to use plastic not only as a material for making a flower pot, but also to create flowerpots. Designer imagination has made it possible to turn ordinary, inconspicuous plastic pots into real works of art.
The advantage of plastic products is their lightness: in the process of growing large and heavy plants (for example, ficus) placed on the floor, they can be easily moved to another place.
Another advantage of plastic is that it can be given any shape if desired. With current technologies, plastic pots can be used as an element of additional lighting, making them glow brightly in the dark.
Plastic pots have a disadvantage - the possibility of rotting of the roots when water is overflowed, since it is an artificial material that does not allow air to pass through, which negatively affects the development of plants.
If you plant a very tall plant in such a light pot, it may lose stability.
Pictures of flower pots
House plant lovers don't have to worry about choosing a unique flower pot. Its appearance can always be adjusted or updated with the help of a flowerpot.
Pictures of pots shown on the Deposit Photo or Landscape Design websites will introduce you to the variety of shell options for pots.
Note!
- How to level an area - instructions on how to do it yourself. Photos of finished works, reviews, secrets + review of simple and complex options
- Alpine slide (rock garden) ☘️ — 150 photos of ideas, new items, design, instructions, diagrams, how to make it yourself
- Veranda attached to the house: review of the best projects (140 photo ideas). Instructions on how to do the construction yourself
Having chosen one of them as the basis for the design, you can always develop the proposed decor idea and add elements that you think are necessary. Fantasy will tell you how best to decorate your home so that it looks fashionable and stylish.
Compositions from flower pots
Pots can be used not only as containers for flowers. You can use them to make interesting and functional crafts and compositions.
An excellent example of a floral arrangement would be an outdoor fountain. To make it, take a large clay pot, which will serve as the base.
Several smaller pots in the shape of a pyramid are installed in it. A closed circulation system with a small miniature pump is installed at the top point. Create the required water pressure and decorate with pebbles and fresh flowers.
- Do-it-yourself dolls - the best ideas on how to make stylish, beautiful toys and step-by-step instructions on how to sew a doll (110 photos)
Choosing flooring for an apartment
- How to lay laminate flooring quickly and easily
Variations of crafts made from pots are limited solely by the imagination of the master. These can be figures of people, animals or architectural structures, such as a picturesque castle, a miniature town or a lonely lighthouse.
You can make colorful flower slides and chandeliers, which are obtained by combining several large and small flower pots into one large vase. The main thing is to completely surrender to the flight of fantasy and not be shy to express your emotions.
Hanging planter
Amateur flower growers cannot be denied their imagination in decorating flower pots for greenhouses or open flower beds. Sometimes, a DIY hanging planter made in the garden amazes with its unusual invention.
All kitchen utensils are used: pots, old bowls, no longer needed in everyday life. You can please yourself and your household with weaving flowers in original shell-pots by using unnecessary plastic utensils and bottles.
Such compositions need to be hung as high as possible. Plants will not interfere with walking, they will not be injured by touching when passing under them. In addition, this beauty will be visible to everyone from afar.
How to decorate flower pots with your own hands
You can get a flower pot with a nice design in everyday use without making it from scratch. Give new life to old flowerpots in the house or use simple purchased items as a basis.
A real designer piece can be made by painting clay with acrylic. Children enjoy doing this kind of work on decorating flower pots. The drawings, cute with their spontaneity, are guaranteed to please the eye.
It is known that little things made by hand give a home a special charm; many can tell about the tastes, habits and hobbies of the owner. And one of these individual features of your home can be flower pots made by you yourself.
In addition, each of your green pets has its own character, requirements for planting and care conditions, and a pot made according to an “individual project” can fully satisfy both your aesthetic tastes and the urgent needs of the plant.
Planters for the garden
The main difference between a flower pot and a flower pot is the lack of drainage. Therefore, you need to select options so that you can freely remove pots with plants from them without damaging them. When making flowerpots for the garden with your own hands, you can take into account all the nuances of watering and removing plants from flowerpots.
Decorating a garden with hanging flowerpots located on arches, or building a multi-tiered version in the form of a staircase exhibition, is quite possible even for those gardeners who are not particularly friendly with applied arts.
Note!
- DIY garden decorations: 150 photos of original ideas and new products. Instructions with step-by-step guidance, diagrams and drawings
- Fast-growing climbing plants for the fence and garden ☘️. Review of perennial and annual plants. Photo + instructions with description
- DIY barbecue: TOP 120 photos of the best examples of work. Master class on making at home + simple diagrams and drawings
Wooden pots
They look very authentic and original, and the wood is easy to process and repair. To work you will need a drill, hammer, chisel, jigsaw or saw, chipboard and a small log.
Excess parts are removed from the log. Then, using a drill, a series of holes are drilled at the same distance from the walls. Using a hammer and chisel, the holes are widened and the core is removed from the log.
A pot with thick walls is formed from the resulting workpiece. To prevent the tree from interacting with moisture, it is better to place a plastic pot inside and plant flowers in it.
How to crochet beautiful napkins: tips with video lessons and patternsHow to make a doll from nylon tights and padding polyester with your own hands
- DIY boat - interesting ideas on how to make a boat from scrap materials (100 photos)
DIY flower pots
True connoisseurs of individuality do not ask the question: “What and how to make a flowerpot with your own hands?” They try to create their masterpieces by trial and error.
Before you start creating, you need to think about the functioning of the pots.
Flowerpots for a garden, gazebo or local area are made mainly from scrap materials. Old low fences are used. They are used to make original frames for large above-ground pots.
A thick block of wood looks fabulous, the middle of which has been freed up to fit the size of the pot. This is such an extraordinary unity with living nature that it evokes genuine admiration.
Trays from cardboard boxes
Many household items are sold in small paper boxes that are just the right size for sowing seeds and strong enough to hold soil. Boxes of bagged tea and much more will serve you well.
Required Supplies
Step 1: Cut out the box
Use scissors to cut the box slightly lower. Do not throw away the long piece of cardboard you cut off.
Step 2: Make Dividers
Use cut pieces of cardboard to create dividers as many as needed.
Source
Rope plant pots
To create the simplest design you will need 3 pieces of thick cord, each 2.5 m long. Do-it-yourself rope planters require some skill.
Note!
- Weaving willow baskets: beautiful and unusual do-it-yourself baskets. Detailed diagram of willow weaving + photo examples of finished products
DIY gazebo - the best design ideas. Description of construction stages with step-by-step instructions for beginners + 160 photos
- Capers - TOP-150 photos of types, best cooking recipes. Application options and beneficial properties + instructions on how to choose capers
Taking a ring of small diameter (2-3 cm), we thread each cord into it so that the ring is in the middle of the cord. You need to tie all 6 segments into a knot near the ring itself.
To free your hands for work, you need to hang the ring somewhere. We tie the ropes in pairs into knots at a distance of 40 cm from the ring.
Next, we knit knots from adjacent pairs of ropes at a distance of 10 cm below the previous ones.
This type of weaving is suitable for oversized pots.
Macrame flowerpots
The technique of knotted weaving from thin rope, twine, yarn is macrame. Do-it-yourself macrame flowerpots are a garden decoration; by dressing flower pots in such a shell, we will truly create the gardens of Babylon. Everyone who gets into them will admire such beauty.
This type of weaving was invented by men. Don’t be surprised if you see the owner of the house making a similar craft.
This pot turns out to be a light and elegant item. By improving the technique of knot weaving, you will create multi-tiered flowerpots of unprecedented beauty.
These pot shells look appropriate with both large and small pots. They are secured with carabiners to hooks, which can be located on a fence, arch, or wall.
Wherever macrame flower pots are attached, they look stylish and original. This is truly a universal item.
How to make a clay flower pot with your own hands
Roll out the clay using a rolling pin. Place a plastic container on the resulting layer, cut the clay, moving the knife along the edge of the container. This will give you the base of the pot.
Mix the remaining clay and roll it out again into a long narrow strip. The strip should be long enough to wrap around the sides of the container.
Make the sides of the pot from a strip of clay. The edges of the strip can be overlapped or cut and joined at the ends.
After wetting your fingers with water, smooth out all seams.
Let the clay dry for 1-2 days. When the walls have hardened, the pot can be turned over to provide air access to the bottom of the pot.
When the bottom is dry, you can start painting the pot.
Mix the paint with water. Use a wide brush to paint the bottom half of the pot.
Note: the paint does not need to be applied evenly. A little carelessness allows you to achieve a good result - it immediately becomes clear that the pot was made by yourself.
If necessary, the paint can be applied in several layers.
Mix a drop of black acrylic paint with a few drops of water.
Dip a brush in black paint and then, running your fingers along the bristles, spray it onto the sides of the pot.
Advice: it is advisable to carry out this procedure outdoors, otherwise you risk splashing furniture and walls.
After the paint has dried, the surface of the pot can be varnished.
Attention: a pot made of unfired clay should not be exposed to moisture, so you need to place a plastic or metal container inside, and only then fill the pot with soil and plant the plants.
Original article in English.
The design of flower pots, especially the inexpensive segment, is rarely highly decorative. Arranging them on the windowsill gives rise to a rather dull sight, the impression of which even the lush greenery of the plants living in them cannot correct. But what to do if your budget doesn’t allow you to buy something more decent, but you really want to maintain an atmosphere of comfort and celebration? Try decorating flower pots with your own hands.
You can transform existing flowerpots using a wide variety of techniques. Use literally everything you can find in your home bins: from scraps to cereals. Just a little imagination plus a little effort - and your home garden will sparkle with new colors!
Flower pots
Indoor flowers in beautiful flowerpots are a unique opportunity to decorate and diversify the interior of your home. Flowers, in addition to being beautiful, also ozonize the air in the room. Many gardeners know how to make flower pots. After all, it is their prerogative to decorate their favorite flowers with beautiful flowerpots.
For such products, both special material and waste materials are suitable. You should not try to quickly throw away waste building materials left after repairs. They can always be put into action. Great idea: make flower pots.
Verandas and balconies become winter gardens if heating is installed on them. All year round, any flowers, even the most exotic ones, will delight you with their fragrance and bright colors.
Flower pots are created from leather, fabric, rope and yarn. Plastic dishes also come into play. And how unusual the cement planters look. They can be painted any color, or left grey. In combination with bright colors of flowers, they will also look great.
Plastic flower pots
Plastic bottles are an excellent material for making garden flowerpots. It's quite easy to make plastic flowerpots with your own hands. Such decoration of gardens and flower beds practically does not require financial costs, but it creates an unusually attractive image for the garden or flower bed.
Five-liter bottles left over after using water are best suited for such crafts.
To create a flowerpot, you need to take a bottle, cut a vertical, wide strip into it, into which you will later install pots. The spout and neck of the bottle will become the face of any animal.
By painting a bottle the color of baked milk, you can make a pig. Leaving the ears when cutting out the strip (from the neck side), bending them, we get the finished muzzle.
The lid is a real pig's snout if you make two holes in it. Draw only the eyes, and you can install small pots in the cut strip.
Such a pig will delight household members and garden guests.
Using the same scheme, you can make a flower pot in the shape of a hedgehog, cat, dog or some other animal.
Top 10 ideas for decorating flower pots with photos
When choosing ideas for decorating flower containers, it is important to consider the material of the pot and the available materials.
Textile design
Plastic and ceramic containers are best suited for decorating with fabric. The surface of the pot is carefully rubbed with sandpaper and treated with glue, after which a layer of fabric is applied. To prevent air bubbles from collecting under the fabric, the procedure is performed slowly, carefully smoothing the material with your hands.
At the top, the fabric is formed into a bag or wrapping paper for a bouquet. The decorated pot is tied with a silk or satin ribbon with a bow. Pots wrapped in burlap or lace will fit perfectly into a Scandinavian interior and will harmonize with rustic styles: Provence, country, eco.
Decoupage
A technique that allows you to transfer an image from a sheet of paper or napkin to the surface of a pot. For decoration you will need a clay, glass or ceramic pot in light colors. Paper with a picture or a napkin is applied to the surface and carefully covered with a layer of glue, after which the product is dried and coated with colorless varnish.
Shells
You don’t have to bring seashells from the seashore in your own suitcase: you can easily buy them in the decorative accessories department. Before “planting” the shells on construction glue, they are washed, degreased and placed in a certain geometric order.
If necessary, the mosaic of shells is coated with clear varnish, glitter or painted in the desired color. When creating ornaments, shells are skillfully combined with buttons, pieces of glass, coins or fragments of ceramic dishes.
Felt
Cases in the form of figures are sewn from felt material, which are well suited for decorating miniature cacti. Bright colors will enliven a boring computer desk or a gloomy windowsill.
Cement flowerpots
Such containers for growing indoor plants are used not only in the garden, greenhouse or veranda, but also in the interiors of studio apartments decorated in an industrial loft style. water bottles of 5 and 2 liters are used as blanks for cement flowerpots Large containers are made directly at the site of future use.
Mosaic
This technique is used to decorate both large garden containers and miniature pots for cacti. Glass, tile fragments, natural or artificial pebbles are used as mosaic elements. The work is carried out on a tin base using mounting mesh, plaster mortar and tile grout.
A blank sheet for creativity is a tin can or a whole bucket , onto the surface of which plaster mortar and mounting mesh are applied. After the mosaic is laid, the product is dried, and the voids between the elements are filled with grout.
Eggshell
A mosaic pattern is laid out with eggshells. At the preparatory stage, it is washed and crushed to the desired size. The mosaic is laid out on a layer of PVA glue. completely lined with mosaics look interesting The “egg pattern” is easy to decorate in the required shades.
Basket weaving
One of the most difficult designs: to implement your plan, you will need skills in weaving from twigs, because you need to weave a real basket, commensurate with the flowerpot. If you don’t want to learn new skills, replace weaving with twine wrapping a piece of burlap stretched over a flowerpot.
Braiding with twine, threads and cords
The technique is similar to gluing: the selected container is coated with a layer of PVA varnish, then braided with dense threads of different colors. Using twine, sisal or cords you can achieve the effect of a wicker basket.
Stone containers
Garden flower pots are made from pebbles or small stones, fastened with a building compound intended for stone surfaces. They look very organic in a summer cottage or garden plot.
Outdoor flowerpots
To decorate the local area, the owners strive to arrange color compositions. They should be interesting and attractive not only by the flowers themselves, but also by the containers in which they are placed.
Outdoor flowerpots, depending on their location, are made into floor, hanging and wall structures. Each of them has its own purpose. If you need to decorate an arch, then, of course, you need hanging flower pots.
Wall-mounted pots are better suited for decorating fences. Ground compositions decorate the entrance to the house, cafe, and are located directly on the ground.
Ground pots are made massive and durable; they contain voluminous pots with a large number of flowers. You can make them in the form of fences, or you can create a stone composition by gluing material that imitates stone to the base of the flowerpot.
Outdoor wall planters are made from plastic bowls and bottles. They are attached with carabiners to hooks. The chains or ropes that hold the plant pots are firmly attached to the carabiners.
When making outdoor flowerpots with your own hands, you need to remember that they must be strong and durable objects. Being constantly outdoors, they are exposed to wind, rain, and dust. The sun beats down mercilessly and can ruin the pots. A cracked pot is not only unsightly, but can also fall apart, ruining the plant.
Creating beauty with your own hands is both exciting and very profitable financially. Using materials at hand, people passionate about creativity create unusual flower arrangements arranged in incredibly original flowerpots.
You just need to apply your imagination and desire, and your garden and flower garden will become special, not similar to standard design options, and a relaxing place for the whole family.
Tips “What can you make flower pots from…”
Articles about the world of recycling, that is, about turning unnecessary things into useful things with your own hands. Today we will look at what flower pots can be made .
This article will probably be of more interest to owners of dachas and non-pretentious country houses. Flower pots that people make with their own hands from literally garbage, of course, have a certain unglamorous appearance, and they are unlikely to be appropriate in a classic interior or, in general, in any interior where the novelty and neat appearance of objects is important. Well, if your interior or exterior of your home has a slightly hooligan character, this article is for you.
One of the most common “garbage” materials for flower pots is tin cans from baby food, other products, paints and other things. These jars are very durable, yet lightweight, and make excellent flower pots. If you don't paint them, but carefully remove the sticker, they look pretty good.
Please note that if you make flower pots from tin cans without decorating them, then the cans should be perfectly clean, without traces of glue or scratches, and shine brightly, as in these photos. If the jar is bent, scratched, stained, it will not look beautiful, it will need to be decorated.
The easiest way to decorate a tin can is to paint it. You can make such a flower pot with your own hands brighter, more festive - in general, almost anything, the main thing is that it suits your interior or garden.
The main thing you need to do when you decide to make flower pots from tin cans by painting them is to choose the right color. You don’t need to paint with the first paint you come across, but choose colors so that they match
a) among themselves
b) with the colors of your interior or garden
c) with the flowers that you plant in these flower pots.
Here in the photo above and the photo below are excellent examples of such a selection.
Bright purple paint goes well with green flowers, orange stems and a white background. Please also note that the cans are painted extremely carefully, without drips or unpainted marks. It is very important.
When you're making flower pots from cans, either tin like the ones in the photo above or plastic, it's important to decorate the jars in a way that looks neat and thoughtful. It’s better to first practice on completely unnecessary and unusable cans, get your hands on it, and then decorate what you are going to make flower pots from.
Accuracy is very important, otherwise, instead of a charming craft, you will end up with something from the “paint and throw away” series).
Flower pots can also be made from unpainted cans.
Colorful, brightly colored jars are quite suitable for making flower pots if your flowers are also bright enough. Add a touch of postmodernism to your interior by making flower pots from Campbells soup cans. For example))
Flower pots can be made from cans of something incomprehensibly industrial, as in the photo above, and then they don’t need to be decorated - they are scary enough to be beautiful, especially if they contrast with delicate flowers.
The hit of the season is flower pots made from rubber shoes. By and large, making flower pots from crocs, rubber boots and other things is easy - you just need to pour some soil in there and plant a flower. True, it is better for such pots to be in the shade rather than in the direct rays of the sun.
We continue the topic of recycling old accessories))):
Let's move on to recycling old dishes and utensils. Flower pots can be made from old cauldrons:
Flower pots can be made from old buckets:
Making flower pots from plastic bottles is already a widespread practice, so I will show you only those methods that I personally liked. In the photo above there is a wonderful composition, the delicate color of the petunias emphasizes the color of the wall, a very beautiful lattice, and the banal necks of plastic bottles look unexpectedly appropriate.
Flower pots can be made from old barrels, bowls, watering cans and even chandeliers (I especially like chandeliers...):
Flower pots are easy to make from old vinyl records - heat the record and shape it into a bowl. The resulting flower pot can be painted.
Flower pots can be made from the most unexpected things, for example, some people build them into thick books, as in the photo below on the left. I belong to a generation for which a book is something sacred, so looking at this picture makes me cringe, but I have to admit that from a design point of view it looks interesting. But what I really liked was the flower pot that was made from half a coconut, in the photo below on the right. Just a great idea.
If you didn’t manage to make beautiful flower pots the first time, you can use them to make an installation in a chair or hide them in an old basket
I hope you enjoyed this article.
