Crafts from disks - original ideas and secrets of making interesting jewelry (95 photos)

Magnetic photo frames

• Necessary materials:
• Multiple disks
• Photos that fit
• Glue or double-sided tape
• Thick cardboard
• Small magnets

We cut out circles of the required size from cardboard and glue them on both sides to the disk, glue a photo on one side, and a magnet on the other side. To make photo frames last longer, you can laminate the photo and use a glue gun or superglue.

You can decorate an old photo frame with small pieces of disks, completely updating its appearance.

Decorating with fragments

This material shimmers colorfully in the sun and has a bright shiny surface. This property can be used to decorate various items: boxes, photo frames, vases, flower pots.

Picture frame

To make crafts you need:

• Rubber glue.
• Old CDs.
• Thick cardboard.
• Scissors.
• Gouache.
• Ruler.
• A simple pencil.

A brilliant idea for recycling disks

Before starting work, you need to measure the size of the desired photo for which the frame will be made. You can simply trace the photo on cardboard, and create the outline of the future frame around it.

• From cardboard we cut out a frame for photographs of the desired size. We paint it with gouache (you can use different colors) on both sides. We apply paint in several layers so that the cardboard does not show through.
• We cut the disks with scissors into fragments of different shapes and sizes. We glue them to the frame, after first attaching them to the surface and figuring out how they will look. If desired, use a thin brush to go over the cracks and crevices between the fragments, painting them with white gouache.
• Leave the frame for 30 minutes until completely dry. Cut out a stand from cardboard and glue it to the back of the frame.

First, it is important to measure the size under the photo

Coasters for glasses and cups

The easiest way to make crafts from a CD. We take the disk and decorate it with any materials that can be used to create a smooth surface. You can cover it with colored fabric, glue cardboard with beautiful designs, use felt appliqués, etc.

Candlesticks

Materials:

• Discs
• Glue gun
• Any decorations
• Candles

Place a candle on the shiny side in the middle; tea lights in an aluminum sleeve look beautiful. Various materials are used for decoration, these can be pine cones, shells, beautiful beads, we glue everything with a gun.

To use as a hot stand, cut out circles from foam rubber that correspond to the diameter of the disks. We glue the foam rubber and the disk together and cover it with thick fabric on top.

Hot coasters

Let's start our master class with a description of the simplest craft, namely, a stand for hot cups or a kettle. This is a necessary thing in the household, especially considering how quickly a polyethylene tablecloth melts under the influence of heat. But for many people in the country, it is precisely this that protects the surface of the dining table. options for making stands . Depending on the amount of free time and the availability of materials, everyone will find an option to their liking.

• The simplest stands They just look like painted wheels. Some people will want to paint the plate on both sides, others will leave the shiny side untouched - the choice is yours. Acrylic paints are most suitable for these purposes. You can apply a thick layer of paint to the surface, and then use a toothpick to “scratch” any pattern. The excess paint will be easily removed, leaving you with beautiful shiny lines. You can immediately apply the ornament with paints by hand or use a stencil. After complete drying, you can safely place hot dishes on the stand. You can protect the paint layer with two balls of acrylic varnish.

• The stand will be more dense and heat-resistant if you stick small sea pebbles, glass beads or decorative stones on it. An interesting way to decorate - solid coffee beans. Such cute and beautiful items will make tea drinking more enjoyable. You can attach the decor with superglue or using a heat gun. It is recommended to open the surface with varnish.

• A more painstaking way - braiding multi-colored disks threads. To do this, the base is first woven. A thread is pulled through the central hole and a small number of turns are made, about 5-7. Thus, the surface is divided into equal sectors. Now choose the color you want and thread the thread in a circle. One step under the main thread, the other above it, and so on in turn. Reminiscent of basket weaving technology. Your “web” should fill completely. You can change the colors of the threads by tying their ends. For a more uniform pattern, you need to pull the threads tightly and adjust them so that they form even circles. At the end of the work, the edges of the threads are attached with glue and hidden. If you don't want to weave in a circle, just thread the thread through the center until you cover the entire surface.

• A method for real needlewomen - we sheathe beautiful old scratched wheels cloth. To do this, you will need not only pieces of interesting material, but also thick cardboard or padding polyester. From any of these materials you need to cut two disk-sized circles for each stand. After cutting, spread glue on both sides of the disk and secure the resulting circles. This will help the fabric not slip during subsequent work and make the stand thicker. Now you need to cut out two larger pieces from the material chosen for decoration with an allowance of about 0.5 cm on the seam. Apply the fabric, carefully check that the edges extend beyond the diameter of the disc evenly. Using several pins, pin the workpiece. Now you need to sew the edges by hand. If you know how to crochet, you can braid the circle around the perimeter with a thin thread and add a little lace. If not, don’t worry, the seam will help hide the decorative edging. After finishing the work, you just need to carefully glue it to the end of the stand with hot glue. You can make a small buttonhole. Use it to hang coasters on the wall near the kitchen table.

These are the kind of useful and cute little things you can get if you show a little imagination and perseverance.

Pincushions

Materials used:

• Disk
• Textile
• Sintepon
• Threads and needles
• Plastic cup (you can use a yogurt or fermented baked milk cup)

From padding polyester we cut out a circle the size of a CD (thickness from 1 to 2 cm) and the circle is one and a half times smaller in diameter than the disk (thickness from 5 cm). We apply a padding polyester corresponding to the size of the disc and cover it with fabric.

Cut off the bottom of a plastic cup, insert padding polyester, cut off the excess part and cover it with fabric. We sew them together to make a hat, and decorate them with ribbons if desired.

Napkin holder

There are two ways to make a napkin holder. For the first you will need a disk and a small piece of thick cardboard or plywood; for the second, only one disk is useful. In both the first and second cases, you need scissors and a glue gun.

First way:

• Cut the CD into two equal parts;
• We cut a piece of cardboard or plywood of the required width and length corresponding to the diameter of the disk;
• Using a glue gun, both halves of the cut drive are glued to both sides of the base.

Second way

• Two parallel lines are marked and drawn on the disk at a distance of 1.5 cm from the middle;
• According to the drawn contours, the plate is cut into three pieces;
• The semicircles are brought to the base at an angle of 90 degrees and connected using a glue gun.

Of course, you can design and color the resulting blank in any way you like.

Curtains

To make them, we cut the disks into small pieces, make holes with an awl and connect everything with threads or ribbons.

New Year's toys

Moving on from fairly everyday things, one cannot fail to mention the possibility of making New Year's toys. Their surface shimmering with bright colors just begs to be made into a New Year's toy.

Cutting any figure from a disk is not difficult. It is best to decorate the resulting garland with something. For example, draw something or glue a decoration.

You can glue disks pre-cut into small pieces, like fragments, onto New Year's balls.

Such crafts should be treated with varnish - such small fragments can pose a high danger to others if they come off the toy for one reason or another.

With the help of a large number of unnecessary disks and a glue gun, you can always make a Christmas tree that can attract attention no less than a real and decorated Christmas tree.

Crafts from disks for children

Old discs are indispensable for creativity with children; they are suitable for creating simple crafts with preschool children, as well as for older children and more complex crafts.

With the help of multi-colored dense fabric, or felt, discs can be turned into funny animals, birds, and charming ladybugs.

New Year's decor from disks

For the New Year, it is proposed to make a lot of festive decorations, cutting out Christmas trees, bells, hearts, stars, hanging them separately or combining them into fancy garlands.

An old Christmas tree ball with luminescent pieces glued on will sparkle with the brightest colors.

If you find an unnecessary rubber ball, construct a real rotating disco ball, covering it completely with identical squares.

Master class on creating crafts from spruce discs:

1. After degreasing the CD with an alcohol-containing liquid, it is painted with gouache, covering the voids.
2. A cardboard circle is glued in the middle.
3. A colorful napkin is glued on top.
4. Repeat the steps on the reverse side.
5. Cover the surface with varnish.

All that remains is to make a hole for the hanging cord. A brilliant Christmas wreath made from many small fragments or complete blanks with decorative details will decorate a door or window.

dream Catcher

If your baby often has bad dreams, you can make a dream catcher from an old disk; this is also an excellent option for decorating a child's room. Using a heated awl, make holes along the entire diameter of the disk, then the children can decorate it themselves. Multi-colored threads and beads are used for decoration; you can also additionally paint the disk with paints.

Christmas decorations

Necessary materials:

• Discs
• Christmas balls
• Glue

We cut the disks into small pieces of any shape and glue them to the balls. Bright garlands reflect beautifully on the shiny surface of the disc.

• 
  Crafts from glue: 150 best ways to use glue to create crafts + simple diagrams and photos of finished works

• DIY crafts from matches: step-by-step master classes and DIY craft ideas + simple and quick photo diagrams

• Crafts from tubes - unusual ideas, step-by-step master classes for beginners + photo reviews of ready-made DIY crafts

You can use old Christmas tree balls, or buy the most inexpensive ones. Disco balls are made in a similar way; in addition, you will only need a ball that fits in size.

Making a disco ball

Everyone who has ever seen a disco ball on a dance floor certainly wanted to have the same one at home. Now you have the opportunity to make a copy of it.

Making a ball is very simple. To do this, you need to prepare the following materials: a round balloon, two newspapers, about 25 disks, paste and water.

The work will take you almost 4 hours, be prepared for this so as not to be distracted during the creative process.

The procedure for creating a disco ball is as follows:

• inflate the balloon to the maximum,
• completely cover it on top with wet newspaper scraps,
• let them dry slightly
• Soak the next newspaper scraps in the paste and place them on top of the first, repeat the action,
• place the creation in a warm place, let it dry thoroughly and become tough,
• pierce the balloon with a needle and thread the fishing line to hang the product,
• Cut several disks into 1x1cm squares,
• cover the edges of the squares with colorless varnish,
• using glue, fix the squares with the mirror surface up on the prepared hard ball along the entire circumference so that the fishing line is on top,
• carefully paste over the bottom part of the product; non-format pieces can be glued at the top, since this part is not visible from below,
• hang a disco ball from the ceiling.

Read here: Swan craft - master class for children aged 5 years and older. Methods, diagrams and materials necessary for crafts (70 photos)

Mobiles for cribs

Materials:

• Discs
• Colored cardboard
• Satin or nylon ribbons
• Awl
• Glue

Glue colored cardboard to the non-shiny side of the disk and cut out various shapes, such as the moon and stars. We make holes in the figures, thread the ribbons and attach them above the crib.

DIY CD crafts are a huge niche for creativity. With their help, you can decorate mirrors and pieces of furniture, create unique figures and toys.

The resulting crafts can last for more than one year, and if the plan doesn’t work out, you won’t mind throwing it away. This is a fun activity for people of all ages. A large number of photos with crafts from disks and other detailed master classes can be found on the Internet.

Option 1. Volumetric heart

DIY crafts made from old CDs are easy to make. And you don’t need to look for material, everything you need is at home and at hand.

Materials required for work:

• There are a lot of disks;
• Hard cardboard;
• Scissors;
• Pencil or marker;
• PVC glue.

Stages of work:

1. We cut out a large heart from thick cardboard - this is the basis.
2. Take the glue and start gluing the disks onto the cardboard. Try to fill all the empty space to make the picture complete. With each new layer of disks there should be fewer. The last row is one disc and it should be placed in the middle of the heart.