DIY table lamp - 85 photos of options and examples of making a table lamp

Which lamp to choose

First you need to decide what type of lamp you like. On the Internet you can easily find photos of a homemade lamp of various types: rack-mounted, hinged, on a flexible bracket, etc.

How do they differ from each other? Let's figure it out.

Handmade lamp safety

When making a lamp yourself, do not forget about electrical safety. This applies to a greater extent to cantilever and hinged lamps. The simplest solution to ensure the electrical safety of a table lamp is a round cable, the insulation must be double-layered, the cores have a cross-section of at least 0.35 square meters. mm.

Conductive areas or areas susceptible to dampness are protected with flexible rubber frills. Attention! The cable should be mounted in such a way that it is not under tension in any position of the lamp.

Rack lamp

The simplest design in a technical sense. Places on the table or any surface (chest of drawers, coffee table, etc.). Illuminates the nearby area.

In terms of design, there is complete freedom; the choice of lampshade and frame for such a hand-made lamp is limited only by your imagination.

Lamp on a complex breakable hinge

It looks impressive, but this option is not suitable for all interiors. In terms of mechanical parts, this design is more complex and expensive. Due to the presence of a large number of components, you will be able to save little on such a lamp.

What to make a chandelier from and how to hang it

You can use waste and specially purchased materials for the chandelier. It’s easy to make lampshades out of them with your own hands, and if you follow proper connection techniques and all the subsequent steps, it’s safe.

The production of frame lampshades and their decor are discussed above. Let us add that chandeliers made of wood, plastic and cut glass bottles, CDs, and cans look very impressive.

The chandelier must be suspended on a separate rod. Rigid and flexible suspensions and special cables securely attach even the lightest chandelier to the ceiling.

The cartridge is disassembled, the cable is pulled through, a loop is made under the cover and a lock washer is put on to prevent accidental pulling out of the cartridge. They pick it up and screw it with their own hands into a ready-made LED or Edison lamp socket. Globe lamps with a frosted bulb and shank are excellent, creating bright, but not dazzling lighting.

External tiling work - features and unusual solutions
DIY welding machine: simple instructions for creating and using the device
Read also: How to paint the walls in the bathroom with your own hands
Wall-mounted curtain rods: mounting options, review of modern models

By combining various decorative techniques and assembly techniques, and understanding electrical engineering, you can create amazing and functional lamps that highlight the style of the interior.

Lamp on a flexible arm

Thanks to the flexible base, this design is very convenient to use: you can direct the light to the desired area.

But due to the complexity of the design and expensive elements, it is more profitable to purchase such a lamp in a store than to make it yourself.

Original table lamps

Let's look at the step-by-step production of several lamps.

Loft style lamp.

Loft style lamp

A simple, elegant lamp made from copper pipes. For production you will need:

copper pipes and angles 90 each (7 pcs);
super glue, acetone;
wire of the required length;
plug, socket, light bulb, switch;
roulette;
pipe cutter;
pliers, thin flathead screwdriver, Phillips screwdriver.

First, think about the dimensions of the lamp; for convenience, you can make a drawing. (For the lamp in the picture, 3 pieces of 15 cm, 1 piece of 20 cm, 1 piece of 45 cm and 1 piece of 25 cm were used). According to it, mark the copper pipes with a marker where you will cut them. Pay attention to the accuracy of the markings - this is important.

Then use a pipe cutter to carefully and carefully cut the pipes into the required lengths.

Insert the wire inside the sections and corners. Connect the parts and glue them with glue. Wait until the glue dries.

Parts for loft lamp

Install the socket, switch and plug. Screw in the light bulb and enjoy the result.

Another option for a loft lamp

LED lamp

You can make a table lamp from LEDs with your own hands. Such a lamp is much cheaper in cost than conventional ones (in terms of energy consumption), and it is assembled from inexpensive elements.

How to choose a phase meter - review, purpose, principle of operation, scope of application + instructions for use with photos
How to make a transformer with your own hands - step-by-step instructions, diagram, drawings, list of materials + photo of a finished homemade transformer
Which hidden wiring detector is better? TOP 10 best manufacturers with photos and descriptions

Table lamp made from branches and slices

Wood in the interior is always a classic - it is always fashionable and relevant. By decorating a table lamp with a cut of wood or an old piece of driftwood with your own hands, you will get a designer item that simply has no price.

See here: 6 Master classes - DIY chandeliers and lamps made of wood

To do this, we need to select any piece of wood we like, process it correctly, namely dry it, apply a pest-resistant impregnation and coat it with varnish.
The second stage is to mount the top of an old floor lamp into the base. If this is not the case, it doesn’t matter; light supply stores usually sell bases for lampshades.

To properly process branches or cuts, read the article “How to properly process wood for the interior.”

Electromechanics

The electrical circuit of a table lamp is simple. You will need: light bulb, socket, switch, plug and cable.

Like store-bought copies, the DIY lamp is designed for 220V.

The main thing to remember is electrical safety (especially when designing hinged lamps). The cable must be double insulated and under no circumstances strained, the wiring must be reliably protected.

So, detailed instructions on how to make a rack lamp with your own hands:

Tie the cable with the plug in a knot (or put on a washer to fix it
Select your rack (it could be a glass or plastic bottle, jar, clay base, etc.) and run the cable through it
Fix the light bulb socket on the stand and attach the cable to it
Secure the frame (it can be made of wire or a bottle)
Put on a lampshade

Tightening the lampshade

The work is carried out as follows:

Cut out wedges. The smallest seam allowance is 10-15 mm.
Pull the cover over the frame so that the seams lie evenly on the ribs.
Seam flaps are smoothed on both sides using a knitting needle.
Sew the lapels in a line. As a result, each rib should be in a drawstring sleeve.
Leave 1.5 cm of lapels unstitched near the top and bottom rims.
To ensure uniform tightness, the ribs are trimmed with cuffs not along the circumference, but along the largest chord.
Straighten the fabric, bend the lapel located at the bottom. Next, the lower rim is sheathed in the same way as the ribs.
Straighten the fabric again and trim the top rim.

Other options

There are other options for creating a lampshade for a table lamp, which make it possible to realize original design ideas.

Lamp shade made of varnished paper:

A so-called blank is glued from ordinary paper.
Treat the paper with acrylic varnish.
As soon as the varnish has dried, the lanolin composition is rubbed into the blank twice.
The blank is entangled with a thread treated with PVA glue.
Finish the work by fixing the lampshade cover with glue to the frame. The latter includes the lower rim, mounting ties and washers for the chuck.

Synthetic fabric lampshade:

Using the blank described above, you can make a rigid lampshade without seams from synthetic fabric. After cutting out a truncated cone (with a small allowance), the blank is covered with the resulting cut.
The fabric is secured at the edges with paper clips.
An acrylic composition is applied to the middle part of the fabric.
The paper clips are removed from the dried canvas and the outer edges are processed.
The inner flaps are trimmed, and fishing line is placed in the bends and secured with glue.

The lampshade can also be made from writing paper. In addition to paper, you need thread, PVA glue, scissors and a sewing needle.

Another option: a lampshade made from plastic glasses. The structural elements are fastened with a stapler.

A lampshade made of threads looks very original. A hard ball is used as a mandrel. The mandrel is sequentially lubricated with Vaseline and glue. Then a thread is wound around it (at least 100 m of thread will be needed). A special hole is left for the cable and cartridge. After the glue dries, the ball is blown off, and the dried threads form a durable lampshade.

A table lamp made with your own hands can give an unrivaled appearance to your interior. What tricks do modern designers and professional engineers use to give an unsurpassed look to the finished product? Photos of DIY lamps with different designs can be seen below.

The reason lies on the surface: despite the abundance and variety of interior elements, the table lamp occupies its leading position. Consumers have a wide choice of materials, design and ergonomics.

In this article, we would like to share with our readers simple ways to decorate an ordinary table lamp, so that you don’t spend a lot of money and the result is interesting. We will use the services of our own imagination.

Shade

It depends only on you and your imagination what material your lampshade will be made of. This can be paper, glass, plastic and any available means, even the most unexpected ones.

Technological maps in construction - what is it?
How to fix a laptop that won't charge
Insulated dielectric screwdrivers up to 1000V - tips on how to choose the best manufacturer

Rice paper lampshade

It looks impressive in almost any interior, and a wide range of colors will allow you to choose the color that suits you. To create such a lampshade, you simply need to wrap the lamp frame in paper.