Step-by-step master classes on making roses from foamiran
The rose is deservedly called the queen of the garden. The variety of its shapes and colors evokes delight and a desire to touch this miracle.
Do you want to know how to make a rose from foamiran?
In terms of grace, it is not inferior to the real one and will delight you with its unfading beauty for a long time.
Peony option
If the previous method of forming a flower seemed too complicated to you, pay attention to this master class. By following the step-by-step instructions, you can create a beautiful peony rose.
Necessary materials:
- foamiran (yellow, preferably two shades, and green);
- sharp scissors;
- glue gun;
- wire;
- thick hook;
- ball on the handle;
- thick foam rubber covered with dense, lint-free material.
The first step is to prepare the petals and leaves. You can use a cardboard template, or you can immediately cut them out of foamiran. A slight difference in the shapes and sizes of the blanks will only add realism to the product. We cut out 12 of the smallest petals in the main color and 6 in another shade of yellow. If you do everything only in yellow, it’s okay.
Now you can give the blanks a natural shape. Place all the petals, except the largest ones, one by one on a heated iron. Place the hot plastic piece on the foam rubber and press it in the middle with a hook.
Heat large petals in the same way, place them on foam rubber and roll them with force into a ball. If you don’t have such a ready-made tool, you can attach a large bead to a wooden skewer or knitting needle.
Place the sepal on a toothpick and place it on the iron. The tips of the petals should curve slightly.
We evaluate the result.
Take a thin wire. Cut 4 pieces, bend a small loop at the end of each.
Glue 3 small petals onto each wire. Their edges should face the same direction.
Now glue 4 petals of the following size onto these blanks.
Form the third layer by gluing 3 more petals onto each piece.
Twist the pieces in pairs.
Twist the resulting blanks again into one common center of the flower.
Glue the bottom in a circle, first 4 darker ones, and then light petals. Next, fix the largest ones, each new petal should half cover the previous one. Lastly, attach the sepals.
To make the flower more realistic, add small bright petals to the middle of the rose using a toothpick.
If you want to achieve perfection, you can slightly tint the edges of the petals with yellow (use dry pastel or acrylic paint).
The masterpiece is ready. You can add leaves to the rose, attach a pin to it and use it as a brooch, or glue it to a hairband. The choice is yours.
Bouquet of roses from foamiran
Foamiran (plastic suede) is a material from which flowers of amazing beauty are obtained. In the previous handicraft lesson we showed how to make a boutonniere for the groom, in this master class we will create a very beautiful bridal bouquet with our own hands . Yellow foamiran roses with delicate foliage are a truly sunny and happy bouquet that will never wither. It can be given as an addition to a gift, especially since it will bloom forever.
We need:
- foil;
- floral wire;
- foamiran yellow and green;
- cardboard;
- thick needle;
- scissors;
- iron;
- glue gun;
- large yellow beads;
- pencil;
- lettuce and green satin ribbon.
Rose from foamiran
First, draw 4 petals of different sizes on cardboard. The largest petal will determine the size of the largest bud, so flowers as big as you like.
With a thick needle we trace the outline of each petal on yellow foamiran. For the first three largest petals, we outline each one 8 times, and the smallest petal we outline 10 times. You should get 5 flowers.
It is necessary to form 5 blanks from foil onto which we will attach foamiran petals.
Each blank should be drop-shaped and fit into a petal of the appropriate size.
Cut the floral wire into pieces. In accordance with the size of the middle, we select the length of the wire.
Now let's shape all the petals and give them a more natural look. To do this, heat the iron and apply the petal for 2 seconds.
Immediately remove and twist it at both ends in different directions. After this, straighten and carefully stretch the middle.
The results are very beautiful and lively petals.
We take a blank with a stamen made of foil and glue it into the middle of the petal.
First we form an unopened bud. Therefore, we immediately glue the upper part until a corner is formed in the center.
In the same way, glue the second petal opposite the first. Their edges should fit snugly over the entire surface of the foil. After this, we attach the three petals with a second layer, but at the same time they should be more open.
Make sure that the edges of each petal in the bud match.
In this way we collect the entire flower from petals of the same size.
The two buds should be identical and half-open.
We will make sepals from green foamiran. We draw them with a needle and cut them out. The edges must be cut using scissors, repeating the fold lines.
We twist the sepals in the same way as we did with the petals, and then straighten them.
We string each piece onto a wire stem and attach it to the bottom of the bud.
We glue them to small buds.
Now you need to assemble the bouquet into one whole.
Glue together the two largest flowers.
Then we attach the rest to them from different sides, holding them by the stems at one point.
Cover the top part of the bouquet with leaves. We make them in the same way as the previous ones, only in a different form.
We cover the upper part with three such leaves.
We wrap the remaining wire that is visible with green satin ribbon.
Secure the end with glue.
So that the leg does not seem empty, we will tie a salad-colored bow on it at the intersection of the foamiran and the green ribbon.
Additionally, we decorate the bouquet with large yellow beads, placing them in random order.
It turns out to be a very beautiful wedding bouquet that looks like living yellow roses.
How to make a bridal bouquet
It is enough to have foamiran, appropriate materials for work and the desire to create.
Gorgeous bouquet of yellow roses.
Foam has become almost a universal material, a wide range of its applications confirms this.
A bunch of foamiran!
Foamiran is used in decorating wreaths and hairpins, in scrapbooking, creating original flower arrangements in floristry, and wedding decor (boutonniere for bridesmaids). Roses from foamiran, made according to our master class, are also suitable for creating topiaries. Especially for the site Handicraft Lessons Antonina Mazur.
Wreath of small roses
If one rose doesn’t seem enough for you, you can collect a whole bouquet of them. Be patient - as a result of simple but painstaking work, you will get a gorgeous headband of unopened rose buds.
Prepare materials:
- foamiran for flowers and leaves;
- thin wire for roses and thicker wire for the base of the wreath;
- wire cutters and pliers;
- glue gun;
- green tape;
- nail scissors;
- quick-drying glue;
- optional - print for leaves and paint for petals.
You can choose the color of the roses at your discretion. Cut out petal blanks approximately 1.5 cm long at the rate of 6-8 pieces per flower. You can tint them for more realistic coloring.
Place the petals one by one on an iron heated to 100 degrees, then twist them around their axis. Then straighten the blanks and form bulges with your fingers.
Cut the thin wire into pieces of 4-5 centimeters. Bend a loop at the end of each. Using a gun, coat the petal with glue and wrap it tightly around the wire.
Wrap the second petal around the first, glue the third in the same way.
Add further petals, placing them at the same level. As the bud grows, glue the blanks less tightly. The photo shows a finished rose of 8 petals.
Cut out leaves and sepals from green foamiran. Make small notches along the edges of each pattern.
Heat the sepals on an iron and twist. After heating, immediately press the leaves onto the print to create a relief. You can simply press out the veins with a toothpick.
This result is worth the effort.
String a sepal onto the wire with the bud and secure it with glue from a gun. Secure the leaves to the wire using quick-drying glue.
Similarly, continue making small closed roses from foamiran. Their exact number depends on the volume and collection pattern of the desired rim.
To form a wreath, attach blanks with roses to thick wire, securing them with tape. The type of finished product depends only on your desire.
You can complement the composition with white or contrasting large roses.
Make loops at the ends of the wreath and thread a ribbon through them to adjust the size, or simply connect the ends of the wire. Your shiny accessory is ready.
Christmas decoration made of glitter foamiran
We will make an unusual decoration for the Christmas tree with a flower and spruce branches.
This is the kind of decoration I propose to make at this master class on glitter foamiran.
To make such a decoration from glitter foamiran, the following materials are needed:
- red and silver glitter foamiran;
- green Iranian foamiran;
- dry blue pastel;
- universal mold for leaves;
- iron;
- second glue;
- glue gun;
- scissors;
- ribbons;
- Christmas decorations - balls;
- decorative twigs and berries;
- wire No. 26,28.
Foamiran crocuses: master class with step-by-step photos
We begin the master class on glitter foamiran with blanks.
From glitter red foamiran we cut out 5 petal circles, 2 with a diameter of 6 cm and 3 with a diameter of 7.5 cm to create a rose. From silver foamiran we cut out 5-6 rose leaves.
the cut out rose leaves from glitter foamiran on an iron at a wool-click temperature, applying the shiny side to the iron. Then we process it on the mold, pressing the entire leaf well with a sponge.
Making a rose from glitter foamiran, MK
We also heat large petal circles on the iron, but apply them to the iron with the wrong side of the foamiran. Apply one petal at a time. Then we pull out the middle of the petal and twist the top at the same time. Using the finger of one hand we stretch out the middle, and with two fingers of the other we bend the top of the petal.
We heat the petal circles on the iron, one petal at a time, and curl the edges.
Then we form the middle of the rose from small petal circles.
We glue the formed center into a larger petal circle, applying glue to the base and slightly to the petals, and form a rose by pressing it with our fingers.
So we glue the second large petal circle, placing the petals in a checkerboard pattern.
We cut the third large petal circle into separate petals and glue each one separately, depending on where it is necessary. So that the rose comes out beautiful.
Making decorations from glitter foamiran: step-by-step photos
We take spruce branches, you can see how to make them in MK Cones from foamiran, connect them together and glue a rose to them.
Then we glue the leaves and decorative twigs.
Glue Christmas tree decorations - balls. If you don't have them, you can make them yourself. Cover the foil balls with foamiran.
Then glue on the berries and bows. You can add any decor you wish. We glue a ribbon on the back side to tie the decoration onto the champagne bottle.
This is the decoration we made with a rose from glitter foamiran.
This decoration can be used to decorate a New Year's gift.
Small unopened bud
If you want to try your hand, but starting with large projects is scary, take note of a simplified method for creating roses. In this MK, the tools and materials are similar to the previous versions, and you will make the base of the flower from ordinary foil.
The result of the work is a closed, goblet-shaped bud that will decorate a hairpin, barrette or hair tie.
Beautiful rose in step-by-step pictures
For novice florists, another method for creating realistic, beautiful roses will be useful. They turn out lush, and you can vary their size at your discretion.
Thanks to step-by-step photos, it is very easy to learn how to create masterpieces. And don’t be afraid to experiment with color: blue and purple vintage roses will look no worse than the usual pastel and red ones.