If you hate to part with your old chandelier, you can turn it into a stylish garden lamp

Coffee capsule Nescafe Dolce Gusto Chocochino, 3 packs of 16 capsules
1305 ₽ More details

Hot chocolate capsules Nescafe Dolce Gusto Chococino, 8 servings

334 ₽ More details

Mulching film

Very often, in a pile of unnecessary trash, we find old, broken chandeliers that lie for many years and do not serve their owners. But this can be fixed. It would seem that at first glance, a chandelier can perform exclusively its main function, illuminating the room, but this is not the case, and you will see this for yourself. Second life of an old chandelier.

Various little things

You can create a small fountain from a lampshade in the courtyard of your country house.

You can repurpose a lampshade with an interesting color into a wall panel.

Or make a stand for indoor plants.

And it won’t be difficult for “handy” men to even build a bedside table from an old chandelier.

You can find completely different and interesting uses for a chandelier; use your imagination and create a useful one out of an unnecessary thing.

Did you like the article? Help others learn about this article by clicking on the social media button!

For the beginning and equally creative ideas for turning trash into useful things, see the first part of the article “How to creatively use old trash and unnecessary things. 70+ ideas. Part 1.".

31. Other options for lampshades and chandelier models made from bottles and cans. How to trim a bottle, see here.

And not only from bottles - by analogy, and in other ways:

32. Piano turned into a garden fountain.

33. An audio or video tape turned into a clutch, coin purse or cosmetic bag.

34. An old drum kit, with a little help from paint and wire, has become a truly authentic chandelier.

35. Old coffee tables turned into a set of shelves in the same style.

Hanging vase

To make a hanging vase you will need:

• wire;
• pencil;
• paints;
• priming;
• chains;
• hooks

If there is room for a hanging vase at home or in the garden, it can also be made from an old lampshade. The first steps will not change; the workpiece needs to be washed and put in order.

After this, the fastenings have to be made. Thick wire needs to be wrapped around the pencil once. You will get the first loop. Place it on the lampshade near the thread, figure out where to place the second loop, and wrap the wire around the pencil again. You can make three or four loops. After this, press them tightly to the workpiece, and twist the ends of the wire with pliers.

The vase can be coated with spray paint or painted with acrylic. For better adhesion and a neat result, pre-prime the workpiece.

After the paint has dried, all that remains is to attach the chains to the loops. It is convenient to use metal hooks for this. This way, the vase can be removed at any time, washed inside, and changed water. Hang the structure in the garden or at home and place fresh flowers inside.

How to make a frame for a lampshade

Typically, a lampshade consists of two metal rings connected by jumpers (from 3 pieces). The shape of the frame can be trapezoidal, cylindrical or curly.

For the frame, wire made of any metal is suitable: copper, aluminum, steel. Using wire cutters, you need to cut two pieces of wire and make two circles out of them - one larger, the other smaller.

It should be noted that the design for the lampshade of a pendant chandelier is slightly different from the design of the lampshade of a table lamp, but in any case there is always another inner ring through which either the socket or the cord from the chandelier is threaded.

To work with wire, you will need wire cutters and round nose pliers (in order to make a neat loop to hold the wire together.

But, nevertheless, the most correct thing would be to buy a ready-made frame for the lampshade - fortunately, construction hypermarkets are full of them.

You can make a pattern for a lampshade like this:

So, the frame for the future lamp is ready and the most important thing to choose is the decor of the lamp and the material with which to work. We offer several options for making a lampshade with your own hands.

Transforming a chandelier with paint

Give an old chandelier a makeover with metallic paint . Chandeliers illuminate and act as art objects in the interior. Brass chandeliers will appeal to those who love shiny gold fixtures.

To paint the chandelier you will need spray paint specifically designed for metal. Metallic spray paint comes in a wide range of colors.

Materials:

• Dishwashing liquid.
• 2 sponges.
• Film.
• Abrasive 220 grit.
• Primer for metal.
• Metallic paint.
• Transparent polyurethane paint.

Work algorithm:

1. Clean the chandelier with a solution of hot water and soap . It will remove contaminants that may affect paint adhesion. After washing, wipe the chandelier with a fresh sponge dampened with water to remove any remaining soap.
2. Unhook and untwist any decorations on the chandelier, such as crystals or beaded strings.
3. Cover any parts that do not need to be painted, such as light bulbs and wires, with protective film.
4. Place the chandelier on a protected surface for painting. Work outdoors or in a fully ventilated area to avoid inhaling spray paint fumes.
5. Sand all parts of the chandelier with a 220-grit abrasive. Sanding will create fine scratches, providing a surface for new paint. After sanding, wipe the chandelier again with a damp sponge. Let the chandelier dry.
6. Apply metal primer to the chandelier. Keep the spray can about 20cm away from the chandelier and keep the spray moving to avoid dripping. Leave the primer to dry.
7. Paint the chandelier with two to three coats of spray paint to ensure even coverage . Leave the spray paint to dry.
8. Spray the chandelier with two to three coats of clear spray polyurethane to create a shiny, protective coating of paint.

Related article: Do your curtains match the interior of the room?

Lampshade made from scraps of fabric

To make such a lampshade you will need the following materials and tools:

• two pieces of fabric of different colors;
• lampshade frame (purchased or made yourself);
• threads with a needle;
• scissors.

And more options for inspiration: fabric lampshades:

Ribbons and lace, buttons and beads, pieces of other fabric and bows are suitable for decoration. Even old pants or other clothes can give life to a designer item.

Most often, such lampshades are sewn according to a template: for this, a pattern is cut out of paper or newspaper, and then transferred to fabric:

The lower and upper parts of the product can be decorated by gluing or trimming them with fabric of a different color or with lace or braid.

Wine bottle chandelier

This option is more technologically complex. Requires ability to use special tools. Glass is a fragile material and quite difficult to process. The result of the work is an elegant thing.

Materials and accessories:

• empty wine bottle;
• glass cutter;
• abrasive paper or circle;
• electric cartridge;
• electrical wire;
• electric drill with a set of drills;
• disk made of metal or wood.

Crafting an Item

Using a glass cutter, cut off the bottom of the bottle at the required height. Using abrasive sandpaper or a circle, we clean the edges of the cut from burrs and sharp protrusions. We insert an electrical cable through the neck of the bottle and connect it to the socket. We drill holes in the disk. The number of holes corresponds to the number of bottles used to make the chandelier.

We attach the wires from each light bulb to the top of the disk. Closer to the center of the disk, drill 4 holes symmetrically for attaching the chandelier holder bracket. We hang the chandelier by a bracket from the ceiling and connect it to the power supply. We decorate the connection point.

Making a chandelier is accessible to every family. For this you do not need any special materials or devices. It is important to combine the idea with the materials available on the farm. A self-made chandelier will become an undoubted decoration of your home.

Creativity on one element will inspire household members to work on improving other parts of the home. Joint creative work will only strengthen friendly family ties.

Paper lampshade - options and ideas

No less interesting can be a lampshade made of paper or cardboard.

Suitable for work:

• pages of glossy magazines;
• old newspapers;
• old unnecessary book;
• notebook (can be covered with writing);
• paper napkins with patterns.

To make a simple paper lampshade you will need the following materials:

• base - a lampshade-ball made of paper of any diameter;
• square-shaped note paper;
• scissors and glue.

First, cut out circles from note paper (can be replaced with regular colored paper).

Decorative elements need to be glued from below, row by row, until the entire surface of the lampshade is covered.

Instead of regular colored paper, you can use corrugated or velvet paper, or you can replace them with lace fabric - in this case, the lamp will look lighter and airier.

More options for lampshades made of paper or cardboard, photo:

Lampshade made from paper plates

In order to change the look of the room, just a little is enough: change the pillows or blanket on the sofa, throw in a bright rug or make a lamp with your own hands.

Decorating interior items can be interesting and addictive! Vases, napkins, panels, lampshades - it’s these little things that change the face of the interior!

To avoid buying a designer lamp, make your own lampshade from plates. For this you will need:

• the base for the lamp is a cylinder made of paper or cardboard;
• several sets of disposable paper plates;
• glue gun;
• scissors.

Lampshade made of threads

Similar things became popular several years ago. Light and weightless balls of thread, depending on the diameter, can become either a Christmas tree decoration, a decorative item, or a lampshade. Threads can be used in any color, or you can dye them when the craft is ready. You can also decorate the top with ribbons and lace, beads or buttons - this will make the craft look more elegant.

How to make a lampshade from threads? For work you need materials and tools:

• a balloon (or an inflatable ball that can be deflated);
• a skein of thread (the thicker the thread, the more reliable the lampshade will be);
• PVA glue;

Depending on how often you wind the threads, you can get either a completely airy and light lamp, or a denser lampshade.

Operating procedure:

1. First, you need to inflate the ball - whatever the diameter of the ball, the lamp will be the same. Mark the hole at the bottom that will need to be left open.
2. Wind the threads around the ball in any order. Between layers, as well as on top, coat the entire ball with PVA glue and let the glue dry for about 4-5 hours.
3. Now the ball can be burst and pulled out. All that remains is to thread the lamp socket and hang the lamp.

Using threads and glue, you can make a lamp in a different way: instead of a ball, use a plastic bottle, and use denser threads. The bottle must first be covered with tape to make the dried lampshade easier to remove. The shape of the lamp will also be different:

More thread lampshades, photo ideas:

Lampshades made from plastic spoons or forks

Using some simple techniques and a few packs of disposable spoons or forks? you can create an excellent original lamp that will decorate your interior. Such lampshades can be used in almost any room - in the kitchen, in the hallway, on the balcony, and even in the bedroom.

To make such a lamp you will need the following materials and tools:

• several sets of disposable spoons (table spoons or tea spoons - it all depends on the desired size of the product);
• plastic 5-liter cylinder;
• scissors;
• glue gun or universal assembly glue for plastic products.

1. Cut off the lower part (bottom) of the cylinder and degrease the surface.
2. Carefully break off (or cut off) the ends of plastic spoons.
3. Using a glue gun, glue the spoons to the balloon in rows, starting from the bottom.
4. Then make a headband and glue it on top.
5. Pass the cord with the socket through the hole on top and screw in the light bulb.

If desired, the spoons can be painted in any color. This way you can make a lampshade for a floor lamp, wall or pendant lamp.

In addition to spoons, you can also use disposable forks or knives for the lampshade - the lamp will be a little different, lighter and more elegant:

Or from plastic cups:

New life for an old chandelier

Surely, in many living rooms there are still chandeliers that are a pity to throw away, since they are a memory of some person or event.

In order not to throw away an item, you can give an old chandelier a new life:

• First, it should be washed, degreased, plastered and painted.
• The decor for an old chandelier can be made in the form of decoupage, you can update the sockets by making them in the form of influxes of candles using hot glue, not forgetting to then tint them.
• You can make original pendants at your discretion from existing beads, buttons and other elements.

Original do-it-yourself lampshades, photo

If you wish, have good imagination and skillful hands, you can make a lamp from other available materials - wood, cocktail straws, clothespins, burlap, packaging cardboard, even plastic bottle caps.

We have selected original ideas for hand-made lampshades; we hope our ideas will help you choose what suits your interior. So, photos of lamps and lampshades made and decorated with your own hands:

• Author: Maria Sukhorukikh
• Print

Rate this article:

1. 5
2. 4
3. 3
4. 2
5. 1

(0 votes, average: 0 out of 5)

Share with your friends!