Several options for stairs for the attic. Photo
Today there is a wide variety of building materials from which you can build a staircase. Some of them will be discussed in the article.
Selection of staircase options to the attic
The manufacture of a flight of stairs must begin with careful calculation and design to ensure comfortable movement, while taking up a minimum amount of usable space. The most common mistake in design is the incorrect choice of the site where the structure will be located.
You can make many options for stairs to the attic from wood or metal. In the photo you can see several options that will clearly show what the staircase looks like in real time:
- if you do not have the opportunity to install a permanent structure, then you can make an attached version. Such designs are used in country houses where people do not live permanently and there is limited space;
- folding. This option is very convenient as it saves space. Such a ladder will be obtained only when necessary;
- simple marching ones. Such options are considered the most high-quality and capital. They are characterized by increased safety, have a solid and attractive appearance;
- spiral staircases. This option is suitable for those houses where there is limited space, but the structure itself has very low safety and ease of lifting indicators. It cannot be installed in houses where small children or elderly people live. It is difficult to climb and descend;
- external. If it is not possible to install any of the options proposed above in the house, then you can try to build an outdoor option. It can be made from any material, but given that the structure is located in the open air, it is better to give preference to metal. No need to worry about the building's façade;
- Most often, such stairs only complement the overall picture, and if you add beautiful wooden railings, then the house will have its own zest. The main disadvantage of using such a design is the transition from the house to the second floor across the street and the systematic treatment of the material from which the stairs are made with anti-corrosion or anti-fungal agents. In winter, you will need to think about covering the steps with a special anti-slip material;
- ladder-hatch. With this option, the steps are easily assembled under the roof and hidden in a prepared hatch. For such a device to work, it is necessary to install spring mechanisms that will open the stairs with light movements. It is enough just to pull the hatch down and the spans will begin to unfold smoothly on their own. To make the stairs rise and fall conveniently, you can install automation;
- involute stairs. This type is considered the most beautiful and sophisticated. All attached photos indicate this. If you decide to assemble such a structure yourself, then you should know that it is very complex and without possessing certain skills, it is unlikely that anything will come of it.
Is it worth building a staircase for the attic with your own hands?
If you like to make exclusive things or do home renovations with your own hands, then making a staircase yourself will be the best option.
You can choose the required option based on the photos presented, where you can clearly see how the staircase is constructed, what materials it is made of and how much space it takes up in the room. But you should be very careful with the installation of the structure. Considering that the staircase must withstand heavy loads, be strong and stable, the best option would be to invite a specialist to do the work according to all installation requirements. Attic stairs, photos of which are attached, require care in fulfilling all the necessary requirements specified in the project.
How to choose the right place for the stairs to the attic
A very important issue in the construction of a staircase is the choice of location. When choosing a location, experts advise following these recommendations:
- the best option for installation would be a living room or hall;
- when choosing a design option, you should remember that the lifting should be comfortable and safe;
- you should not choose designs that take up a lot of space and look bulky;
- Very important in choosing the type of staircase to the attic are the dimensions of the floor height.
Installation of attic stairs
Arranging an attic allows you to increase the living space of a country house - you can arrange a children's corner, a workplace or a guest bedroom upstairs. However, first of all, you need to solve the issue of installing stairs to the attic. After you decide on the design model, drawings and plan for future work, take care of the correct assembly of all elements.
Development should begin with such details as stringers/strings, support posts, steps, platform/winder steps (this must be done according to calculations).
If you are making a wooden staircase to the attic with your own hands, then you should definitely understand the theoretical basis. The main structural components are the stringer, tread and risers (the latter do not bear any load and may be absent). A stringer is a supporting beam with recesses for steps, the thickness of which must be at least 5 cm and the width 25-27 cm. The tread is the horizontal part of the step. We chose the best Western casinos for tenge - Betway Kazakhstan.
Article on the topic: Chair with transformation into a ladder: types of designs and features of self-production
Convenient staircase from the street to the house: main criteria
There are several basic criteria that an external staircase for a home must meet:
Comfortable movement. According to SNiP, the width of stairs must be at least 90 cm. Common sense also speaks about this - it will be difficult to go down or up a narrower passage. A width of 1-1.5 m is considered to be the optimal option. There are also certain recommendations on the size of the steps - the height and length should be in a ratio of approximately 18/30 cm. It is calculated that with this ratio, the descent and ascent will be most comfortable. An exception is made for fire escapes - their permissible step depth may be 10 cm less;
This is approximately how the parameters for the height and depth of the steps of a staircase are calculated. Source olestnicah.ru
Strength. This parameter, among other things, is influenced by the length of the stairs. For marching flights, for example, the number of spans is not limited by building codes, but there should be no more than 18 steps on each of them.
Sustainability. In addition to the staircase itself, if the building was erected recently, then you need to think about the shrinkage of the house. This is especially true for wooden cottages, for which external structures are done last.
Wear resistance
Since the staircase is external, this issue must be given special attention, because you always want repairs to be made as rarely as possible.
Safety. The design of the staircase should take into account who will walk on it - depending on the material, it may be necessary to provide ribbed ledges or rubber mats to prevent slipping, and whether the handrails will be low (the minimum permissible height is from 90 cm)
If there are small children who may be left unattended, then you should not leave a distance of more than 15 cm between the balusters, otherwise the child will be able to stick his head there.
Installation rules
Dependence of the size of steps on the angle of inclination of the stairs
The key point when erecting a structure is to maintain the angle of inclination. If the latter is less than 20°, then such a staircase will look more like a ramp.
If the angle of the structure is over 50°, you can only go down it backwards. A tilt of 30°–38° is considered correct. But for the attic it is usually increased to 45°.
The dimensions of the steps and risers are determined depending on the angle of inclination of the stairs. So, the smaller the angle of inclination, the deeper the tread and the smaller the riser; The steeper the angle of inclination, the greater the distance between the steps, and the less their depth. However, there are some restrictions:
- the maximum and minimum height of the step is 20 cm and 12 cm, respectively; the greatest and smallest depth is 38 cm and 30 cm, respectively;
You can see that if we add up the extreme dimensions of the tread and riser, we get 50 cm. This value can be reduced slightly - up to 45 cm. For example, in most multi-storey buildings, the depth of the step on concrete flights of stairs is about 32 cm, while the height is - 17 cm.
There are also special calculation formulas and diagrams that can be used to determine the ideal ratio of these sizes. However, these methods are used only for standard design. Due to the fact that when building a staircase in a private house with your own hands it is quite difficult to maintain all these parameters, many people take verified approximate values as a basis:
- If the angle of inclination is 33°–37°, the height of the riser is 16 cm; at an angle of 38°–42° – 18 cm; at an angle of 45° – 20 cm.
As for the width of the flight of stairs, the optimal value is 80 cm. If more than two people live in the house, then this distance can be increased to one meter. In addition, there is a requirement for the design of the passage height, which must be at least 2 m.
Stairs to the attic: types and advantages
Arranging an attic space is very relevant, as it is not just fashionable, but also very practical. This is a very effective way to increase the area of your own living space. But a reasonable question arises: how will you get to the top floor?
Mistakes made when planning and installing a staircase can negate all the benefits of having an additional room.
Therefore, it is worth knowing that an ill-considered type of structure and its placement can absorb precious square meters.
Types of structures
Based on the type of structure, several main types of attic stairs can be distinguished:
Marching staircase with winder steps. Instead of a conventional turntable, this type involves the placement of special trapezoidal steps, facing the turning angle with the narrow side. This design requires much less space than the option with a platform. The comfort and safety of lifting are not reduced at all.
Single flight staircase. It is perhaps the easiest to make with your own hands. It is a single flight of stairs, with no turns provided. But this option is not suitable for every building. To make it comfortable to climb, the stairs must be fairly flat, and not everyone has enough space for this. In addition, for the required elevation angle, a room height of 2.5 meters is required. You will have to make a fairly long opening in the ceiling, which will reduce the usable area of the attic space.
Two-flight staircase with a platform. Well suited for large and medium sized rooms. The transition platform is made at an angle of 180, 90 or 120 degrees, making it easy to optimize the inclination of the rise, creating comfortable conditions for moving along the stairs. If you install such a structure in a corner, the space will be used more efficiently. Compact spiral staircase. Such a staircase to the attic can be considered perhaps the most space-saving. Such an original design can become a real design solution, transforming and decorating the interior of your home. This device includes a main support column onto which the winder steps are fixed. There are such tiny models of such vertical projects that require no more than a square meter to accommodate. This explains their high popularity among owners of small buildings. Ordinary folding ladder. This option is a simple and quite affordable way to climb into the attic.
The main and main drawback is, of course, not very convenient to use.
The stepladder will have to be folded and laid out again every now and then. In addition, such stairs cannot withstand heavy loads.
How then will you have to bring in the furniture? Taking it apart piece by piece?
Internal staircase
What is good about an internal staircase is its versatility. It can be used both permanently and temporarily.
We can say that the internal attic staircase is the most popular option. It will be the best solution, if, of course, the size of the home allows it. A beautifully made, for example, twisted or lace metal attic staircase can become a real decoration of the house. In addition, during the cold season you won’t have to go outside to climb to the second floor. The only disadvantage is a slight reduction in the usable area of the house.
External staircase
The external one has its own characteristic features:
If the attic floor has its own separate entrance, this allows you to divide the living space. This is especially important in the case when the tenant of the attic floor prefers not to disturb the inhabitants of the entire house by entering his floor. The external staircase does not take up useful space inside the building, which is important for houses that are not very large. It should be noted that thieves and swindlers often “watch” the external staircase: it is easier to enter the house unnoticed through it.. For a house in a holiday village that is not guarded around the clock, a compact internal structure is more suitable. guarded around the clock, a compact internal design is more suitable.
For a house in a holiday village that is not guarded around the clock, a compact internal structure is more suitable.
How to make an attic staircase (step by step instructions)
When making a small staircase to the attic, you must strictly follow all stages of this type of work. The correct location of the structure will expand the usable area of a private house. However, first you need to decide what model it will be, and whether you will need the help of professionals in arranging and building the stairs.
Building a staircase to the upper floor (attic or attic) is not as difficult as it might seem at first. But the main thing is that the homemade design meets all safety requirements:
- The staircase should not take up a lot of space, especially living space (does not apply to the installation of stairs at the entrance to the house).
- It should be located in such a way that the distance from the steps to the ceiling is optimal and allows free movement between floors (during construction, the total height of the floor must be taken into account).
- Climbing a wooden staircase should be as comfortable and safe as possible, and the steps should be reliable and of the correct height and width.
- If you plan to install a folding ladder, you need to make sure that every family member can use it without difficulty.
Choosing a place to install the stairs
The location of the staircase structure is important. The entrance to the attic can be either outside the house or inside. Compact spiral staircases are most often used to furnish an attic space (they are placed either in the hallway or on the street). This is an excellent solution for small country houses.
When determining the installation location of a flight of stairs, it is necessary to proceed from the parameters of the product, the purpose (temporary or permanent) and the availability of free space. All these characteristics must be reflected in the drawings and the finished installation plan.
The optimal solution would be to build a staircase in a separate or passage room. The advantages of this method include the ability to install any design.
On video: mistakes in designing stairs in a wooden house.
Related article: How to make a staircase to the second floor in a country house: calculation of parameters and installation (+80 photos)
Calculation and drawing
The next stage of manufacturing an attic staircase involves calculating the dimensions of the structure and drawing up a drawing. When performing work, you must be guided by the established requirements that determine the permissible parameters of the product. Compliance with safety rules and special standards will allow you to avoid stupid mistakes, and also guarantee ease of movement and long service life of the ladder.
Here are just a few building codes:
- The width of the staircase structure should not be less than 80-100 cm. For two people to pass at the same time, this value can be increased to 150 cm, but for attic stairs this is a lot.
- The optimal width of the step is 20-30 cm, a convenient riser height is 16-19 cm.
- The slope of the flight of stairs can vary from 20 to 75 degrees. For a structure leading to the attic, the optimal angle of inclination is 40-45 degrees.
The above parameters are only suitable for standard size stairs. If such a design does not fit into your interior, then we recommend that you pay attention to the construction of custom-made stairs. This is quite an expensive pleasure, but this way you can avoid unexpected expenses, errors in calculations and installation.
To independently calculate the stairs, you first need to measure the distance from the floor of the lower floor to the floor of the second (attic floor). Based on the obtained indicator, you need to determine the number of steps; to do this, divide the ceiling height by the estimated riser height. To calculate the length of a flight of stairs, simply multiply the number of steps by their width. Based on the calculations performed, make a drawing and apply markings.
Parameters required for calculation
Separately, it is worth noting that if the opening in a private house is not intended for the construction of a staircase, then it should either be expanded or moved. Consult with specialists before starting work.
The procedure for assembling the stairs
Assembling a staircase is a labor-intensive and lengthy process consisting of several stages:
1. First you need to make stringers; for this it is better to take boards with a spare length. Mark the slots using a carpenter's angle and mark the places for cutting the steps. Next, the stringers are cut. The resulting elements must be compared with each other, otherwise the strength of the structure is sharply reduced.
2. The next step is cutting out the area beam. Its width is calculated as follows: the width of the stairs + double the thickness of the stringer. We make cuts in the beam, retreating 7-8 centimeters from the edge, after which we fix it to the ceiling using anchors. We install the stringers in the grooves and secure them with pins or dowels.
3. Now we move on to the installation of steps and risers. There are several ways to secure them (see picture below).
You have insulated the attic space, finished the walls and completed the installation work - which means it’s time to move on to the construction of the staircase to the upper floor. There is a wide selection of products on the market, but the best option in this case would be to make the stairs yourself. Give preference to simple models, and also take into account the features of the room and the purpose of the structure.
Making stairs using stringers and bowstrings (2 videos)
Simple and compact stairs (65 photos)
Metal Stairs. Constructions | Metal Studio In Domodedovo with regard to 85 Stunning Metal Staircases Photo — GooberzzDesigns of stairs to the attic often used options
At a minimum, we can distinguish five main designs of staircases to the attic, which are used in modern houses and are extremely popular. All of them are convenient and practical in equal measure and differ from each other exclusively in design details. Naturally, these very details of the stairs determine their certain advantages and disadvantages, which simply cannot be ignored when choosing.
- Single-flight staircase to the attic in a private house. An ordinary flight of stairs without turns is a very simple design for self-production. The only trouble is that it does not fit in every room - in order for such a staircase to be conveniently climbed to the attic, it must be very flat, and for this, the room in which it is installed must, in turn, be quite spacious. Also, the area of use of such a staircase is limited by the height of the ceilings - if it is more than 2.5 m, then the optimal angle of inclination (30-45 degrees) is problematic to achieve. And that's not all - this staircase design requires the creation of a long opening in the ceiling, which reduces the usable area of the attic.
- Double-flight staircase with a turning platform. It is believed that this is the most optimal staircase design, which can be used in medium-sized and large rooms. Such a staircase is manufactured with a rotation of 90 or 120 degrees - its transition platform allows you to optimize the angle of inclination of the staircase as much as possible, creating favorable conditions for a person to move along it. The most economical option for such structures is a two-flight staircase installed in the corner of the room.
- Single-flight staircase with winder steps. In this version of the attic staircase, the turning platform is replaced by rotating winder steps - a kind of attempt to connect the marching and spiral staircase. Such a staircase can be considered convenient only when the center of the winder step has a width of about 30 cm, which is not always possible to achieve in cramped conditions. Despite this, this type of staircase takes up less usable space than a similar product with a turntable.
- Spiral staircase to the attic. A super economical option - in terms of the fact that this type of attic staircase can take up minimal space. The most compact spiral staircase can fit in just one square meter of space, which makes it the most attractive option for small houses. It is not very convenient to move along such stairs - for comfortable walking on them, the width of the steps should be at least 0.6 m. Despite their efficiency, spiral attic staircases are considered the most dangerous, since it is very easy to trip and fall on them.
- Folding staircase to the attic. Let's say right away that this version of the attic ladder is the least convenient. Among the main reasons for this state of affairs, two points can be distinguished: firstly, stairs of this type are least suitable for frequent movement of people along them. And, secondly, they must be constantly folded and unfolded so that they do not take up space in the room. In general, taking all this into account, a folding attic staircase can be called a country option or a product for very infrequent use.
We will not impose our opinion on anyone, although we have probably already done this, providing a number of advantages and disadvantages for this or that design, but we will entrust the choice to you. The main thing here is not just to rush into the pool and choose a staircase of the design you like, but to make a sober calculation - at a minimum, it is necessary to take into account the existing circumstances and, based on them, decide on the most optimal design of the attic staircase.
What to make a staircase from for your interior
The staircase to the attic floor is an important and exclusive part of the interior, on which attention is focused when choosing an external one, and also an important architectural element. When choosing a material, focus on the interior of the house and your preferences.
Common types of materials in the manufacture of staircase structures are:
- Wood
- Metal
- Concrete (stone)
- Glass
- A wooden staircase to the attic looks beautiful in any interior, giving additional coziness to the room. For making your own staircase structure, wood is the most suitable material that is easy to work with at home. When choosing a wooden staircase, you must take into account that wooden steps should not be too smooth, since polished or varnished steps increase the chance of slipping and falling from the stairs.
- Metal staircase structures in the interior look elegant and sophisticated, their characteristics are durable and reliable, and do not require constant maintenance. A metal staircase can be given any type of design, from artistic forging to chrome plating of individual parts or the entire structure. If you are not familiar with welding, then this DIY attic staircase becomes a difficult task to accomplish at home.
- Concrete or stone are very heavy and massive, placing a strong load on the foundation or floor slabs. Stairs made of such material look bulky in wooden houses; the best installation location is in brick houses or outside the building. A staircase structure made of such material will have to be tiled or plastered and painted, which will lead to financial costs.
- Glass ones are a combined model consisting of a metal stringer and glass steps, which visually add lightness to the structure. Practical and durable, but requires constant care of the glass. Quite expensive staircase structures; steps will have to be purchased in specialized stores.
We use the space under the steps wisely
There are never too many storage systems - any owner of a house or apartment will agree with this statement. So why not use the space under the stairs to create cabinets, open shelves or closed cells to store the little things you need, and sometimes an entire wardrobe? Let's consider several ways to organize spacious storage systems under stairs, in the space of steps, which do not easily perform their function, but also influence the formation of the image of the room.
Depending on the size of the staircase and, accordingly, the space under it, you can organize small drawers under each step. So is a whole complex of storage systems, consisting of a cabinet with hinged doors, open shelves and entire racks.
Drawers located under the steps are spacious and very convenient from the point of view of using the storage system.
But when choosing such a design, it is important not to forget about the main function of the staircase and make moving along its steps safe and comfortable
Creating a hatch
You should get a smooth through hole, which will become the entrance to the attic
Work on installing the stairs to the attic begins with the creation of an entrance hole - a hatch. The first step is to make markings on the floor of the attic. In this case, it is advisable not to hit the floor beam.
If there is no flooring in the attic, then determining the presence of a support element is a little easier. However, there are cases when beams cannot be identified visually. For example, if during the construction of a house a layer of insulation and waterproofing was laid in the ceiling.
Therefore, if the beams are not visible, you can determine the optimal location of the hatch using a hammer drill with a long thin drill. Make several vertical drillings in the ceiling, thereby sketching out the outline of the future entrance to the attic. Then draw with a pencil the exact location of the hatch.
The next stage involves cutting the floor. To do this, use a circular saw. Cutting should be done very carefully and wearing strong gloves so as not to injure your hands. The fact is that hardware may get caught in the ceiling.
It is also advisable to put a blade with the hardest teeth possible on the saw. After cutting the ceiling, remove the layer of thermal insulation material and remove all unnecessary parts of the ceiling covering. As a result, you should get a smooth through hole, which will become the entrance to the attic.
Important: You can proceed to calculating the amount of materials only after creating the hatch. It is pointless to take any measurements with a non-existent “entrance door” to the top floor. After all, the features of the floor and the location of the load-bearing beams can affect the installation location of the staircase and its dimensions.
Installation of steps
To build an attic staircase, you will need boards 30 mm thick. Steps with a width of 25-30 cm are cut from them. Boards or plywood are used for risers, since the load on them is minimal. The parts are adjusted to the stringers and connected according to the tongue-and-groove principle. A special wood glue is used.
Fastening risers using self-tapping screws
The steps themselves are installed next. Docking tenons are cut along the edges, which should fit tightly into pre-prepared grooves on the stringers, and therefore it is recommended to make them a couple of millimeters smaller than the hole in the sidewalls. For reliability, in addition to glue, nails are hammered in.
Assembling a turning staircase
Dimensions and number of steps
The most convenient and safest is a staircase in which the ratio of riser height to tread depth is 15:30.
To determine the convenience and safety of the design, the following formulas are used:
- convenience formula: h - f = 120 mm; safety formula: h + f = 460 mm,
where h is the depth of the tread, and f is the height of the riser.
Existing formulas for calculating the exact ratio of the size of steps and the angle of inclination of the structure are used, as a rule, when designing standard stairs. In a private building, it is not always possible to strictly adhere to these standards. Therefore, you can use approximate calculations:
- if the angle of inclination of the stairs is 32 - 36°, then the recommended height of the steps is 160 mm; if the angle is 37 - 43°, then the recommended height can be 180 mm; if the angle of inclination exceeds 45°, the height of the steps should be 200 mm;
Step size, mmWidthHeightFlight inclination angle40010014º10'38011016º20'36012018º30'34013021º00'32014023º10'30015029º40'28016029º50'26017033º10' 23018037º10'22019040º50'20020045º00′
Advice! Expert recommendations are to make an odd number of treads (from 3 to 18). In this case, it is necessary to count the last step to the upper floor. This amount makes it possible to move up the stairs more comfortably.
Calculation of steps
Peculiarities
Different stairs have their own advantages and disadvantages. But there are also common signs that are characteristic of everyone.
Firstly, a staircase with a wide landing allows you to further increase the space used for living. This is very convenient, regardless of whether the family lives in the room is large or small.
If you choose a small staircase with narrow spans, then this, on the contrary, allows you to save space. That is why owners of small premises prefer screw or lifting models.
Secondly, a beautiful staircase and a properly decorated entrance to the room will become a real decoration of a private home. Wide steps and railings decorated with forged elements or carvings will perfectly complement the corresponding interior.
And finally, the stairs leading to the attic are a traditional element that does not become outdated over time. As many decades ago, they are used to decorate houses even with a small area.
Staircase design - practical and safe variations
Even at the stage of designing a home, it is necessary to choose the option of creating a staircase design. This structure will take up a lot of space in the room and will certainly have a significant impact on the formation of the entire image of the home. Before choosing one or another method of constructing a staircase, consider how often you will use it (some have a bedroom on the second floor, others have a small attic with a playroom), whether small children and elderly household members will climb the steps every day, how many free space can be used to install the structure and what is the budget for this project.
One of the most traditional options for organizing stairs is the single-flight type of structure. In this case, there are several options for the arrangement of steps:
- to significantly save space in the home, the entire structure is located along the load-bearing wall, and the three upper and three lower steps are rotated 90 degrees in one direction;
- a more complex, rounded design of a single-flight staircase presupposes the presence of regular and winder steps, through which comfortable passage is ensured on straight and turning sections;
- a staircase with a zigzag turn is installed near the inner wall - it looks original, but also requires a lot of space.
The main difference between a two-flight staircase and a single-flight staircase is the presence of a platform. Such designs are great for small areas:
- saving space on the second floor and comfortable movement will be provided by an L-shaped (corner) staircase with a 90-degree rotation of the structure;
- installing a straight staircase with two flights is considered advisable only if there is a large distance between floors;
- in some rooms it is logical to install two-flight structures with a 180-degree turn and with winder steps (instead of such steps, you can install a platform, but such a design will only be appropriate in the corner of the room);
- a structure with a smooth transition from a two-flight staircase to a single-flight one looks impressive (suitable for large halls of spacious apartments).
A spiral staircase will help you significantly save square meters of your home for installation. Spiral structures are compact and look very impressive, but are not suitable for all families - children, the elderly and people with disabilities are not recommended to use such structures. In foreign design projects, spiral staircases are found quite often; the popularity of this cost-effective structure is coming to our country:
- The most widely used design is one with a central post and steps attached to it (such a structure takes up very little space);
- By adding an intermediate platform to the construction of a two-flight spiral staircase, you can bring originality to the interior of your home;
- There is a circular method of fastening a ladder that does not require a supporting axis - walls and special fastenings are used as support.
Another advantage of a spiral staircase is that it can be located anywhere in the room. To install a spiral structure, you do not need an angle or the presence of walls that could be used as support. A spiral staircase can be located right in the center of the room, becoming a focal element of the interior.
In addition to the design features of the location of the entire structure in relation to the space, there are differences in the method of attaching the steps:
- the staircase can be fastened with rails - the main condition is the presence of a solid wall to which the steps will be mounted, connected by special fastenings (the resulting structures look light, even airy due to the absence of a visible base for installing the steps, but at the same time the structures are not inferior in strength and reliability other types);
- fastening on stringers requires the presence of a load-bearing beam, to which the main elements of the staircase are attached - risers, steps and railings (the structure rests on the floor of the first floor on one side, and on the upper level landing on the other, perfect for the traditional style of interior design);
- Staircases on bowstrings have a similar design, but in this case the supporting element to which all components of the structure are attached are the bowstrings;
- staircases on consoles seem to float in the air due to the lack of balustrades and fences; the steps are attached only to the wall (it must be strong and very thick).
Installation
We begin the installation by installing the base of the stairs, which is secured from below with a block.
We attach the stringers to the block with self-tapping screws. From above, as mentioned, the stringers are secured with spikes in grooves made and lubricated with glue in the ceiling. To strengthen the connections, metal corners and threaded studs are used. Threaded connections are used to fix beams at 3 to 4 points using washers, creating rigid connections.
1. Threaded rod One of the beams is attached to the wall. The steps are attached to the stringers, starting from the bottom.
They are fixed with dowels or screws, which are recessed and covered with small wooden plugs. All connections must be carefully glued. After which you can begin installing the risers. We screw the tread on the back side of the structure, and sew the beams up to the upper end.
For aesthetics, the visible side part is covered with a decorative strip or plywood. All that remains is to strengthen the staircase with railings for safety and ease of movement. You can connect the balusters to the beam using bolts, or you can attach four rows of narrow boards parallel to the handrail. The standard for the height of the railing is about 90 cm, the width is arbitrary. Installation of wooden stairs