DIY rattan hanging chair: cocoon swing, nest, hammock, egg

09/07/2015 Category: Interior design of apartments and houses Author: Natalya Ivantsova

Comfortable conditions for relaxation are one of the most important aspects that should be observed when creating the interior of a home or garden area. Today there are a lot of furniture options on which you can comfortably sit after a hard day at work.

However, if you want to save money, we will tell you how you can make a hanging hammock chair with your own hands without much difficulty.

Varieties in the photo
Material selection
Manufacturing technologies
Step-by-step instructions No. 1: hammock chair in macrame style
Step-by-step instructions No. 2: linen hammock chair
Video: simple and cozy DIY hammock chair

Peculiarities

The hanging swing design resembles a cocoon. There are a large number of models of hanging chairs. Such a product can be fixed directly to the ceiling or placed on a special stand or stand.

A variety of design styles allows each customer to choose the right product. The pronounced surreal motif of the chair, reminiscent of the shape of a ball, hammock or egg, will give the room a sophisticated appearance.

The photo shows a hanging chair in the interior:

Thanks to the use of metal or steel structures in the manufacturing process, the model acquires increased strength. The manufacturer uses as a basis:

bamboo;
nylon rope;
textile;
wood;
artificial rattan.

Any of the listed materials is environmentally friendly and hypoallergenic, which allows you to place the hanging product even in a child’s bedroom. Maintenance is quite simple and the service life is long.

The chair allows you to sit comfortably and enjoy reading interesting literature, listening to your favorite compositions, relaxing on the veranda, etc.

Material selection

Thanks to a wide selection of materials, today you can choose a chair to suit your interior design.

Modern hammock chairs are made from various materials that can be selected to suit the design of each specific home interior. Let's look at the most popular variations:

products with a durable frame made of acrylic, rattan or plastic, which are covered with natural fabrics (linen, cotton, canvas, etc.);
a cocoon chair is usually made from natural wicker or weaving with synthetic threads;
frameless hanging structures, which are made exclusively from dense fabrics;
a chair with a stand can be made of both polymer and natural materials, the bowl of which is attached to a high support;
Glass products usually resemble the shape of an egg or a drop. Such structures are also suspended from a stand and can be moved to any place in the room.

Advantages and disadvantages

The main advantages of such chairs include:

Exclusive appearance.
Creating a calming atmosphere that promotes complete relaxation and helps in the fight against insomnia.
Strengthening the vestibular system through gentle rocking.

Among the design disadvantages it is worth highlighting:

The need for a pre-thought-out location. When rearranging the product, each time you will need to dismantle the old fasteners and install new ones.
Impossibility of installing a suspended structure to a suspended or suspended ceiling.

Hang from the ceiling or on a stand?

As for the installation method, the product can be suspended from the ceiling using special fasteners (hooks, rings, shock-absorbing springs, chains) or installed on a free-standing stand.
But the operation of products directly depends on their materials of manufacture. For example, rattan chairs should not be installed in the garden or under spreading trees. They do not tolerate ultraviolet rays and high humidity.

Outdoors it is worth placing a chair made of synthetic fabric, artificial rattan or wicker.

Tip : if you are interested in chairs for the garden, you can make them from tires or pallets; there is also the option of assembling a folding version or a real Adirondack. And next to them put a simple table for a summer house or picnic.

Useful tips

Before you start making a hanging chair with your own hands, you should take into account the recommendations of experts.

Weight limit . Most textile models can support a person whose weight does not exceed 100 kg. But the design with the presence of a metal support stand is capable of supporting a weight of 140-150 kg.
Depth . An incorrect calculation of depth can prevent you from fully using the furniture. For example, a base whose depth does not exceed 55 cm will be convenient for use by children. A model with a depth of 80-90 cm will allow an adult to feel relaxed.
Having extra room for swinging.
Availability of durable ceiling tiles . Otherwise, the installation hooks may not be able to support the heavy structure.

If the design is intended for outdoor use, its size can be any, but when making a product for a room, it requires taking into account the dimensions of the room. Excessive bulkiness will not add comfort.

In addition, products made from rattan and plastic are suitable for outdoor use. A textile product will quickly deteriorate from exposure to the external environment.

Kinds

Such furniture is made on the basis of a closed hanging seat, which was invented by Danish designer Nanna Ditzel. Products for the garden retain two distinctive features of their prototype: a rounded shape and the presence of walls on three sides and above the head that protect against falling.

There are many design options, which are divided by the type of design used:

with a rigid frame;
frameless;
in the shape of a nest, when a pair of hoops of different diameters is used;
ovoid;
in the form of a round bubble - dough;
in the form of a drop.

The easiest way is to make your own frameless models from fabric or mesh woven using the macrame technique. They do not require special skills in working with complex professional tools used in the manufacture of their rigid base of metal or wood.

Size calculation

Before you begin manufacturing the structure, you should calculate the dimensions of the finished product. If desired, you can build a large structure so that you can comfortably sit and place a large number of pillows around you.

To make a children's hanging chair, you will need to make the seat size 55-90 cm. For an adult model, you will need to increase the size to 90-125 cm. Depending on the installation method, the height of the finished product will be selected. To ensure the safety of the structure, it is important to calculate the load-bearing capacity with a margin. A product intended for use by children must withstand 80-100 kg; for adults, the withstand load should increase to 140-150 kg.

Using a small drawing, you can depict a scale model to simplify the process of calculating the dimensional characteristics of parts that will be used in the assembly process. Elements of the frame structure are drawn on paper. After this, they are transferred to the workpieces in an increased size.

The photo shows drawings of hanging chairs:

Master classes

More details on how to create different models are shown in the photo and in separate master classes.

Making a simple lying hammock

It is the easiest to make - you will need thick fabric measuring 1 m by 2.5 meters, a rope and two round wooden or metal slats. It needs to be tucked at the edges. It is necessary to make holes at the ends for attaching the rope, while leaving an allowance for the slats. The fabric needs to be folded and a drawstring for the slats must be sewn, and the holes for the loops must be processed. After this, insert the slats into the drawstring and secure the ropes.

If the hammock is fixed on two supports located at a certain distance from each other, then one is enough for the chair.

Hammock chair: master class

To make such a suspension you need to take fabric measuring 1.5 x 1.5 meters. Make a drawstring on both sides and 8-12 loops for hanging along the entire width of the side. Thread a rope into the drawstring for rigidity. After this, thread the ropes into the holes, which are connected on each side with a hanging ring. After this, both rings can be attached to the base.

For convenience, slats can be inserted into the transverse part of the seat from below and from above.

Master class on making a nest

You need to take two hoops and connect them in one place, wrapping 50 cm. Then pull the fabric or ropes on one hoop. On the opposite side of the connection, connect the hoops with ropes from 40 cm to 10 cm long. The shortest ropes should converge at the point of continuous connection of the hoops. Attach 4 ropes to the bottom hoop, secure the second hoop to the back ropes in the form of a backrest. Connect the ropes with a hanging ring and secure it to the hanging ring. The nest is ready.

This place is ideal for people who love privacy.

Such simple chairs can be made at home within 1-2 hours. And you can enjoy them for several years.

How to make a wicker hanging chair with your own hands

A suspended structure for swinging can be constructed from various materials.

Chair made of wicker or rattan

When choosing a material for weaving, it is worth considering that rattan, unlike wicker, has a higher level of flexibility. It is better for beginners to give preference to this type of material.

Most often, rattan or willow vine is used to create a hanging wicker chair. For this purpose you will need to arm yourself with:

Long rods of willow or rattan , the diameter of which is 10-15 mm. To manufacture the product you will need to purchase about 450-500 pieces of material.
Use a metal hoop , a metal-plastic pipe or braided vine rods to make the front part of the structure.
Strong twine and glue necessary for tying the frame part.
Secateurs, awl, knife and ruler , which are necessary to measure and cut the material.
Nylon cord , the cross-section of which reaches 4 mm, and the shade is close to the color scheme of the rods. Using this cord you can weave the back.
Cords, chain or ropes with which you can hang a structure. The length is selected depending on the height of the ceilings of the room in which the structure will be located.

The weaving pattern is selected individually. When using the simplest method of making a hanging model from rattan or willow with your own hands, you will need:

Steam chopped willow or rattan. The willow vine is also cleared of bark. The material is beaten in order to obtain the maximum level of flexibility during operation.
We begin to form the frame part of the structure. If using a hoop for the front of the product, you will need to slightly flatten the hoop. To facilitate this process, it is better to use a metal-plastic pipe. The material is easy to change shape, and using an insert, you can easily connect the ends of the product.
Other parts of the frame are mounted on the pipe. If long rods are used, then vertical weaving can be used. Otherwise, the elements are fixed horizontally.
When installed vertically, the rods are fixed in the upper area of the frame part in the middle, so that gradual sliding apart can be achieved between each other and in the middle part of the backrest.
By bending the rods, we create the desired shape and depth of the seat. From the bottom side the material is collected towards the middle. In this way, you can achieve a kind of basket-frame. When finished, the structure will be positioned vertically.
You can form the base differently. In this case, horizontally located rods will be mounted on the sides of the frame part. To create the desired shape of the seat, you will need to install material every 22-25 mm.
To secure the frame vine to the base, you will need to bend it through the pipe from the inside of the seat to the outside. After bending, the tip is intercepted with the twine vine.
The frame rods are braided transversely with thinner vines. You can start weaving from the bottom and gradually work your way up. In the case when weaving is carried out along a horizontal frame part, it is recommended to start from the middle part of the back to the sides. When approaching the pipe, the tip of the wicker material needs to be bent and twisted around the main wicker/rattan. When weaving, each subsequent material must be pressed tightly against the previous one.
After the entire basket of the structure has been completely braided, the tip of the final rod can be bent, tucked in and secured in the weave.
In cases where there is no reliable support in the seat area, a foam cushion can be placed in the lower part.

Video on how to make a hanging chair with your own hands:

DIY hammock chair

To make a comfortable wicker hammock chair with your own hands, you need to purchase:

a pair of metal hoops of different diameters (70 and 110 cm);
about 880 m of cord for weaving;
slings – 12-13 m;
a couple of thick cords to connect the rings;
a pair of wooden rods;
tape measure and scissors.

When purchasing hoops, you should give preference to options made on the basis of metal-plastic, the cross-section of which reaches 35 mm. Inside such pipes there is a metal braid, which helps to ensure increased strength of the suspended structure.

To cut the required pipe size, you should use the formula S = 3.14xD. That is, the existing diameter of the hoop must be multiplied by 3.14. To connect the ends of the pipes, you can use wooden or plastic internal inserts of a suitable diameter. They are secured with ordinary screws.

Weaving is best done using a polyamide cord with a polypropylene core, the thickness of which reaches 4 mm. The product has a soft surface, but at the same time helps create the most durable units.

First, let's create a winding for the hoop. To cover 1 m of the surface of a metal hoop, you will need almost 38-40 m of cord:

Slowly make turns while maintaining good tension. The cord should be laid evenly and fairly neatly.
To achieve maximum winding density, tightening should be done every 18-20 turns. In this case, they are intensively twisted in the direction of the winding until it stops.
In this case, the braid is obtained with the most even and dense surface. The work process is carried out with gloves.

Step by step process of weaving mesh:

To create a mesh, you will need to use the macrame technique. The basis is a checkerboard with flat knots.
To weave the mesh, a double polyamide cord is used.
The net is attached to the braided hoop with double knots. When weaving, it is important to monitor the tension of the cord. Maintaining maximum tension will allow you to achieve an elastic structure. The free ends of the knots are not cut off, as they create a spectacular fringe.

Instructions for assembling a hanging wicker chair:

A single structure is assembled from braided hoops. From one extreme part they are fastened by winding with one cord.
On the second side, a pair of wooden rods are placed vertically. They will serve as support for the back of the product. The length of the support rod is selected individually depending on preference.
To prevent the hoops from slipping, it is necessary to make small cuts at the four ends of the rods.

Making the back:

We select the back weaving pattern individually.
You should start working from the top of the backrest, gradually lowering yourself towards the seat.
Each of the loose ends of the cords should be tightened in the area of the lower ring. The hanging outer parts are collected into thin brushes.
After braiding the pattern, the ends of the threads are fixed at the bottom of the back and decorated with fringe.
Strengthening the structure is provided by a pair of thick cords connecting the back and seat.
We secure the slings and carry out installation.

Another master class on how to make a hanging chair with your own hands:

Swing chair

To begin manufacturing the structure, you will need to first prepare the following materials:

a hoop with a diameter of 95 cm;
durable fabric (length 3 m, width 150 cm);
zippers 95 cm;
10 m of strong cord or rope;
metal rings for mounting the product to the ceiling;
non-woven fabric;
scissors and measuring tape;
sewing accessories.

After preparing the materials, you can start creating a cozy swing chair with your own hands from a hoop according to the following instructions:

The fabric is folded in half and spread on the table.
There is a hoop in the center. A circle is marked 22-25 cm from it. The marks are connected by a line.
Carefully cut out a couple of circles.
On the first workpiece, a cut is made through the central part. The length of the cut is identical to the diameter of the hoop. A zipper is sewn into this part of the fabric.
Using a seam around the circumference, the workpieces are connected.
The finished cover is decorated with a cutout designed to secure the twine to the hoop. The cover in this case is folded in half. From the fold line, 45° is measured in one direction, and 30° in the other. Labels are added.
The marks are duplicated from the second part of the circle. The distance between the cutouts at the front should be greater than at the back.
The slots are finished with braid.
The hoop is wrapped with a piece of padding polyester. You can secure it with a seam. After this, the hoop is inserted into the case. The zipper is fastened.
The cord is cut into 4 parts, the lengths of which are 220 cm and 280 cm. The sections are folded in half and secured to the hoop. For this purpose, a loop is threaded through the hole in the cover. The ends of the cord are pushed through it and tightened. Long laces will be located in front, and short ones at the back.
Short and long cords are tied to the ring. The cords located on the right side are attached to the right ring, and on the left side - to the left. It is very important that the knots are as strong as possible.
The rings can be hung from the ceiling surface or beam. You can also install the swing on strong tree branches.
The swing chair contains pillows or a round mattress, which will allow you to achieve the most cozy nest.

What kind of furniture can be made for a summer house

Original interior items can be placed not only inside the house, because the garden also needs decoration. Tables, benches, benches and chairs, made in a single concept, will certainly become a source of pride for all family members.

It is extremely important to arrange the dacha with maximum comfort and coziness

Bench

A comfortable and compact bench can be placed on the territory of a summer cottage, in a gazebo or on the veranda. Use a wide variety of elements for production - old chairs, headboards, timber, foam blocks. A fashionable trend is the use of pallets, from which you can make almost any interior element for a summer house. The main thing is that the homemade bench is stable and is not inferior to purchased options in terms of service life.

Due to the presence of a back, the bench has a more convenient design than a bench.

An essential element of comfort is the backrest, which should be tilted slightly backwards. This way you can relax as much as possible during your holiday. In order to give the bench originality, many craftsmen make the seat and back from materials of different textures.

This is a great bench with a backrest for relaxing in the garden.

Wooden table

A strong wooden table is an integral part of a country house interior: it can be placed inside the house or outside, in a gazebo. It is not necessary to purchase selected wood for its manufacture - you can process felled trees for the legs, and small boards left over from global construction will be used to decorate the tabletop.

This garden dining table is made from planks and blocks using simple tools.

Decorate the front surface with polymers - the surface filled with them becomes glossy and very smooth. Between the wood and the decorative coating, you can place fresh flowers impregnated with wax. This way you can create a real picture with ever-blooming elements inside the table.

X-shaped legs add a special character to the structure.

Armchair

To make this element of the interior, you will have to work hard, because the chair should turn out to be comfortable. The simplest option is to knock it out of wooden beams, sand it and varnish it.

The most comfortable chair is the one you make with your own hands.

To make the chair a full-fledged place to relax, you should put soft pillows or a feather cover in it. Often wooden models turn out to be quite heavy, so it is worth installing wheels on the legs.

It’s not at all difficult to assemble a comfortable chair for a country house or summer cottage, and now you can definitely cope with this task.

Rattan

Wicker furniture has not gone out of fashion for a long time and will come in handy in the countryside. Making rattan furniture is a labor-intensive but exciting process. Initially, the raw materials must be prepared - cleaned of the keratinized layer of bark, subjected to steam treatment so that the lashes become more pliable in work. Weaving is carried out on a special frame, which can then simply be pulled out, securing all the elements together with rattan or metal ties.

Furniture made from dried stems of calamus or rattan palm can withstand weight loads of up to 100 kg.

Advice. To give furniture a cleaner look while maintaining texture or shade, it can be coated with varnish or stain.

Weaving rattan furniture is a labor-intensive process that requires a lot of patience.

Outdoor set

At the dacha you can not only work hard, but also have a good rest, having comfortable furniture in your arsenal. The list of essentials includes: several stools, a table, a couch or a hammock. It is not necessary to make them in monochrome color and from the same material. Combinations of wood and fabric base, metal and glass look interesting.

You can be sure of the reliability of the materials used and environmental safety, especially if children will be relaxing at the summer cottage.

You should not make all items too capital - they should be easy to transport if necessary (rain, cold weather). Furniture made from natural materials should not be left outside over the winter, because with the onset of warm weather it may become unsuitable for further use - chips and cracks will appear, and color will be lost.

Such items will become the most striking expression of the individuality of each owner.

How much does a hanging chair cost?

You can purchase a hanging model in a large furniture showroom or on a specialized website on the Internet. The average cost of a rocking product is 7,000-18,000 rubles. If you wish, you can easily create such beauty with your own hands, which will be much cheaper financially and will allow you to build a model of your own design.

A hanging model located on the veranda, in the bedroom or in the shade of trees will add zest to your home interior. The rocking product will become a favorite place for children and adults.

What could be better than after a hard day at work to find yourself in a comfortable soft chair and enjoy the peace and tranquility, swinging in a cozy hanging chair made by yourself.

Manufacturing technologies

You can make both a hanging and a frame product with your own hands

There are many types of hanging hammock chair designs, which vary in size, materials of manufacture, types of fastening, as well as the maximum permissible weight. However, in general, all products can be classified into:

hanging;
frame.

Both varieties are equally suitable for making with your own hands; you just need to decide on the intended purpose of the hammock chair and its parameters. Below we will consider the most easy-to-learn and accessible methods for constructing such products.