Concrete products for landscaping and their use

Where to buy machines for concrete products and VFS for the production of plastic molds and parts

Anyone who decides to independently produce concrete products thinks about purchasing equipment for these purposes.
The Molds Factory company positions itself in the building materials market as a company that makes plastic molds for pouring concrete. But at the plant there is a whole direction for the creation and production of machines for entrepreneurs and all those who would like to start producing concrete products for personal needs or for profit. Buyers are attracted by the price-quality ratio of equipment from the Molds Factory. It is reliable and easy to use. Machines for making concrete tiles are sold inexpensively, due to the fact that the manufacturer does not use the services of intermediaries and trade organizations. The implementation takes place using modern information technologies, which reduces the cost of the process and makes it convenient for the buyer.

Concrete products for landscaping: decorative elements and their production

When landscaping a garden plot and creating its individual appearance, all kinds of flower arrangements, decorative hedges and other green spaces are used. However, it is worth considering that a full-fledged ensemble of a garden area cannot do without small architectural forms that connect the adjacent landscape with the main building and create a complete, holistic view of the summer cottage.

When choosing a material for small architectural forms, you should pay attention to concrete products for landscaping, which have a sufficient degree of decorativeness and are harmoniously combined with other natural materials - wood and stone.

Organization of production of high-quality concrete tiles

An important condition is that the equipment for the production of concrete products be adapted to the rather difficult, sometimes even extreme conditions of domestic production. This equipment, tested in many operating modes, for producing artificial stone using the technology of vibratory casting Marble from concrete, is made at the Mold Factory:

• machines for producing concrete mixtures (concrete mixers), of various design features, with a capacity from 100 to 500 liters;
• vibrating sieves and drum separators for finer cleaning of sand from foreign particles;
• two types of vibrating tables, for horizontal and vertical types of vibration.

The listed mechanisms, upon request of the buyer, can be made for a voltage of 220 or 380 volts. Reinforced versions of the units have greater metal thickness and increased electric motor power. All designs of machines produced by the Form Factory have been tested in concrete production and have been highly appreciated by consumers. They have found application in the production of artificial stone using vibration casting technology. Marble from concrete:

1. Sand and granite screenings are cleaned using a vibrating sieve or separator.
2. A concrete solution is prepared in a concrete mixer with the addition of cement, water, dye pigments and a plasticizer.
3. The mixture is distributed into millimeter-sized concrete tile molds on a vibrating table.
4. After 18 hours, the concrete paving slabs are unmolded.

Products correctly produced using vibration casting technology have high quality indicators and a more attractive appearance than concrete paving slabs produced by pressing. The product that you will produce using the above method must meet certain quality criteria:

• not be exposed to ultraviolet radiation;
• have gas tightness and moisture absorption not exceeding four percent;
• resistant to chemical compounds in aggressive environments;
• resistant to strong mechanical stress;
• made from environmentally friendly materials.

Paving slabs that meet these quality criteria are especially in demand in the building materials market.

Panel installation

There are two main installation methods that can be combined:

• Mechanical fastening method. Dowel-nails, anchors, bolts with or without decorative caps. This also includes welding, which is more often used on the exterior of buildings.
• Chemical installation method. Involves the use of some kind of adhesive composition.

The installation method depends on the size of the panels and the customer’s wishes.

We can produce panels of various sizes, taking into account the features of your interior (openings, corners, steps, etc.). The maximum size of our concrete panels is 3000*1000mm.

They have very high bending strength, so they can easily be transported to any corner of Russia and beyond.

A separate production area is the production of vacuum forming machines

The industrial offer to buy a vacuum forming machine at an affordable price is somewhat popular. The VFS enterprise has brought the ease of operation and the degree of high reliability required by the consumer.

Since the company is talking about the production of molds for casting concrete products, the history of creating a machine for these purposes is worthy of special mention. Many companies that produced plastic molds were looking for equipment that would help in the production of products as efficiently as possible. In our country, at that time, the light and heavy machine tool industry was destroyed in one way or another, by industry. Expensive foreign equipment did not perform well. It turned out to be absolutely unsuitable for working in real domestic conditions. Often, getting it to work meant turning off the electronic hardware, which was the biggest cost of the machines but quickly broke down. At the Mold Factory, they were able to put together these requirements to begin manufacturing VFS, then they began making machines on their own and officially introduced a new type of activity - the production of vacuum molding machines. Today there are two directions of thermo-vacuum machines, each of which is divided into numerous types according to the configuration: external and internal design, hardware. Thus, in the production program of the enterprise there is already a variety of different types of VFS and development in this direction continues.

In addition to this, the company operates a system of so-called individual approach to the buyer. The customer is able to independently choose not only from the thermo-vacuum molding equipment offered to him in the catalog, but also create a complete set of the machine, if desired. Choose VFS hardware according to your requirements and financial capabilities.

As planned, the company ended up with equipment that is easy to use and train staff, and has a high degree of reliability. This has been repeatedly noted, in addition to Russian buyers, by foreign customers. Most of all, customers from non-CIS countries are amazed not only by the quality indicators, but also by the price of the vacuum forming machine.

Manufacturing technology

The production of concrete products of any purpose and caliber includes two stages:

• Preparation of concrete mixture and formation of the product.
• Electrical heating, steaming of concrete products, mechanical or chemical effects.

Steaming process

The most common currently is heat treatment of concrete, which allows in a short time to obtain products of design strength, allowing:

• Transport them to construction sites and improvement projects.
• Proceed with installation work.

In factory conditions, concrete products are steamed in special chambers or autoclaves, molding units or stands. Heated products are subjected to treatment in a steam-air mixture or saturated steam. To create the desired climate in the heating chamber, a steam generator is used to steam concrete products.

Steam generating equipment is equipped with additional equipment:

• Auto on/off devices.
• Solenoid valve.
• Sensor and temperature controller.
• Timer for setting a specific time for the steaming cycle, etc.

Its price depends on the power and configuration of the steam generator. The average cost of such equipment today is 35,000 rubles.

How to order equipment for the production of concrete products and a vacuum forming machine

Having made the final decision to engage in the casting of artificial stone from concrete, you can apply for the purchase of equipment directly to the Mold Factory website. Select the item yourself and place your order using the “cart” button. Specialists from the company will call you back and together you can discuss all the options that are beneficial to you for purchasing equipment for the production of concrete products and VFS for the production of plastic molds.

High-quality machines for concrete production from the Form Factory are now operating in many parts of the country. They are also used by customers in near and far abroad.

Making a concrete fence

In addition to molds for the production of concrete panels, you will need: a vibrating table and a concrete mixer.

Vibrating table

Instructions for making slabs for a concrete fence:

1. A matrix is ​​installed on the vibrating table, pre-lubricated on the inside with oil.
2. In a mixer, a solution is prepared from one part cement, three parts sand, two parts gravel (5-10 mm in size) and water. Be sure to add a plasticizer.
3. The vibrating table turns on. A concrete mixture is poured into the mold, a mesh with a 100x100 mm cell of tied reinforcement (4-5 mm in diameter) is sunk into it so that it is in the center of the slab. Vibrating helps compact the mixture and remove excess air.
4. The surface of the slab is leveled. After the appearance of air bubbles stops, the vibration is turned off.
5. After hardening, the mold is turned over, the workpiece is left on a wooden pallet to gain strength.
6. The matrix is ​​cleaned and coated with oil again. The procedure is repeated to make the next slabs.

The technology for manufacturing sections of a double-sided fence is not fundamentally different from that described above. The only difference is that the filling occurs in vertically located forms.

Cassettes for double-sided sections

Various products for landscaping: trash cans and tiles

The InzhBeton enterprise is the largest supplier of various products for construction. In this section of the site you will find products for landscaping. This includes concrete trash cans and colorful pavers. Domestic products look good and are highly functional. We will help you improve your area and make it cleaner and more comfortable.

Garbage bins and paving slabs

All our products for landscaping can be divided into two groups:

• concrete ballot boxes with a bucket;

• paving slabs.

Concrete waste disposal products have an attractive design and an affordable price. A special concrete production technology allows you to implement various design solutions and turn the urn into a real work of art, in harmony with the landscape design or the nearest building.

Our paving slabs are distinguished by a variety of color variations and shapes. By combining tiles of different sizes and colors, you can effectively landscape a playground, park area or pedestrian area.

High-quality products for landscaping

Our landscaping products are durable and wear-resistant. The performance qualities of the sold concrete bins and paving slabs allow us to recommend them both to large construction enterprises carrying out large-scale projects, and to individuals who decide to improve their land plot or local area. Products are available in retail and wholesale quantities, are promptly delivered anywhere in Ukraine and comply with GOST. Trust the professionals!

Source: https://engbeton.com.ua/g20439855-izdeliya-dlya-blagoustrojstva

Types of borders

Different classifications are used to divide borders. They are distinguished by size, purpose, shape, raw material, and color. For the production of side stones the following is used:

1. Granite. This type of border is superior to others in strength. The product is made from a monolithic piece of rock. It costs significantly more than concrete curbs. Therefore, products are repaired very rarely. This reduces the cost of their use.
2. Concrete. Product manufacturing methods are similar to the production of paving slabs.

• Casting. Raw materials are poured into molds. It is exposed to vibration, which gives the material strength as it dries. The strength of products increases when fittings are installed. Such products are sold as reinforced concrete.
• Vibration pressing. Raw materials are exposed to high pressure and vibration. The strength of the stones allows them to be used in areas with heavy traffic of pedestrians and vehicles.

1. Rubber, plastic, metal. Products made from these materials are installed in gardens and on private land.

A type of curb is distinguished from a mixture of concrete and granite particles. The production process is complex. Therefore, not all manufacturers produce these products.

According to their purpose, curbs are divided into:

• Road. Popular products used in many areas in the city. They are installed in courtyards, parking lots, and roads. The product has been used for 20 years. In terms of strength, they are comparable to mainline products. Road curbs can withstand frequent impacts. Cars run into them.
• Trunk. These products are characterized by large dimensions and weight. The curbs weigh 190 kg, are 1 meter long and 45 cm high. They are distinguished by an inclined profile. The products are made from high-strength concrete grades and reinforced with steel rods. Roads between populated areas are built from these curbs. They are used in the construction of bridges and highways. The material wears out slowly and is resistant to rain, snow and other natural phenomena.
• Garden. The products are installed in gardens and flower beds. They protect lawns in parks. Curbs of this type prevent soil movement. The products include products of different colors and shapes. They are also made to special orders. Plastic, rubber, and metal are used to make curbs.
• Sidewalk. With the help of curbs, the sidewalk is separated from the lawn and roadway. They also cause asphalt or sidewalk tiles to break down. The products weigh 18-25 kg and have a length of no more than 100 cm. The products are distinguished by a variety of colors. In large cities, gray curbs are used. They are also used for decoration. The correct selection of curbs and paving slabs helps create an impressive coating.