Making cool crafts from a gas cylinder with your own hands

Old tires can be useful not only in the garage. Their shape allows you to create small and large structures: poufs, sofas, tables, swings, animal figurines. Tires will come in handy if there is a need to save money when arranging the landscape. You can create real decorative masterpieces, be it a clearing with flowers made from tires, swans or wild animals - children will find a new place to play. Animals are painted in different colors - parrots and peacocks look especially good. The money saved will allow you to equip the open part of the territory with other important devices. Furniture made from tires is used to furnish summer areas. Paths and flower beds can be formed from the same material. Even damaged tires are useful in the work - useful products are formed from individual fragments. Items made from tires are also used for economic purposes.

Flower beds

They can be horizontal, vertical, hanging, wall-mounted, etc. To make a flowerbed in the form of a bowl, a pattern is first applied to the tire. It is recommended to make at least eight corners, while leaving the transitions between them smooth. The shape is cut out and removed like a lid. The rest is turned inside out. The role of the “neck” of the structure will be played by the wheel disk. The product is painted. Another alternative to a conventional flower bed is a hanging structure made from tires. They are cut into two semicircles each. Using twine and screws, the tires are attached to the frame. A football goal will handle the role of the base. The placement height is adjusted by the length of the ropes. A minimum of 3 rows and 3 columns is required for the composition to look “decent”. Tires are painted in different colors. The last stage is soil preparation and planting.

Hanging flowerbed parrot

This product will diversify the color scheme of the site. You will need tools and materials such as a knife, chalk, paint, brush and tire. The ideal option is a passenger car tire. The first step is to create the form itself. Only one half of the tire is left, and it is necessary to preserve the shapes in the form of rings along the edges. The head and tail of a “parrot” are cut out from the edges of the tire. The product must be turned inside out so that it holds its shape better; the rings will need to be tied with wire. This is followed by coloring. The areas near the eyes and nose should be painted white. To paint the body you need to use at least 3 bright colors: the more colors, the better. You can choose the perfect color in catalogs with drawings of wild animals. In addition to figurines in the form of parrots, they also make toucans and other tropical birds.

Flowerbeds

The simplest idea would be to create a flower bed. Even a small child can cope with such work. To decorate such an element of garden decor, you will need tires, paints for exterior work (to save money, you can buy white paint and colored colors for it), brushes.

The tire is painted in solid colors or stripes, flowers or patterns are drawn on it. Such flower beds can be scattered throughout the site or placed in one place, creating a beautiful design for a fence or path.

An unusual seven-flowered flowerbed can be made from tire halves. These halves are laid in the shape of a large flower; the center can be decorated with another splint.

Vertical and hanging flower beds made from tires will beautifully decorate trees, walls of houses or gazebos.

Using a sharp knife, unusual flowerpots or cups and saucers are cut out of tires, filling them with flowering plants.

Tire figures for the garden

Some interesting options:

• palm;
• swans;
• giraffe;
• flamingo;
• zebra.

If there is a dead tree on the site, you can make a craft in the form of a palm tree. However, any more or less long log will do; you just need to hammer it into the ground. First, the tires are cut into long pieces. The fragments are painted green. To make the crown voluminous, the leaves are supported by narrow beams, also green. To make swans you will need to draw a detailed drawing. You will need several narrow rings connected to the tire and a number of wide semicircles from the tires. The neck is made from a long, pointed piece. The product is installed on a disk stand. The methods for making giraffe and zebra are somewhat similar. In the first case, you will need a high pole to simulate a neck, and in the second, the tires themselves are sufficient. The animal's body is made of one or more buried tires. You can even make flamingos out of tires. From the tire you need to cut a massive central part and a long narrow neck. The body is mounted on thin legs.

How to make crafts from tires with your own hands.

Let's start with not just beautiful, but with beautiful and useful. From used tires you can make many functional things for your garden plot.

How to make garden furniture from tires with your own hands - master class.

Old tires need to be washed and cleaned. For cleaning, you can use a special tire cleaner - this will give your tire a shiny black appearance.

We paint the side surfaces of the tire with acrylic paints. For a more interesting look for garden furniture, we can cover the side surfaces of the tires with leatherette and paint it.

To get rid of the gloomy black color, first paint our entire workpiece white. Then we apply our drawing with colored paints. And finally, add clear dark contours to the drawing.

For the middle of our ottoman we make a round pillow. In order to apply color painting on black leatherette, fill the space under the design with white paint, and then apply a colored pattern on top of it.

How to make an ottoman with a knitted cover from an old tire - master class.

If for garden furniture made from tires its resistance to weather conditions was important to us, then for a gazebo or terrace we can make another beautiful version of an ottoman made from tires.

We attach the legs to the tire that has been cleaned of dirt.

We knit the side surface for our ottoman. If you don’t know how or don’t want to knit, you can use parts of an old sweater for these purposes.

We fasten the knitted fabric to the tire from the side and bottom. We close the top hole in the tire with a circle of plywood.

We crochet the round knitted piece for the top of the ottoman with the side piece.

Country furniture

Tires are used to make not only paths, but also furniture elements. You can make a coffee table for your dacha. To do this you will need wax or varnish, a drill, self-tapping screws, a glue gun, a decorating cord, a rope, a tourniquet, plywood and a car tire. Two circles are cut out of plywood. They are attached to the tire on both sides. Self-tapping screws are used for this. Circles cover the holes. Then the entire surface is covered with cord. It is attached with hot glue. At the end the legs are attached - the product is ready. The craft will look good both in open space and in the interior. Poufs and chairs are also made from tires. To make an ottoman, two glued tires are enough. They should be wrapped in mesh and dressed in textiles. The chair will need 3 tires. A seat is made from two, and two circles are cut from the third. The back is made from a whole ring, and for the armrest you will need a cut one with free ends.

Armchairs and ottomans

You can even create a comfortable chair from tires. Supplies you will need are bolts and nuts, screws, self-tapping screws, a screwdriver, a drill and a chisel. First, a narrow ring is cut from the tire. Then two thin strips with free ends are cut out. On the other side of the tire you need to do the same. 2 wheels will need to be treated. All four rings have two holes on opposite edges. They are connected into a structure similar to a square. The bases for the legs are attached to it. A seat is formed from narrow strips. At the end, a wide back is made. The most convenient option can be considered a product made of two parts - an upper semicircle, and a lower one in the form of a whole tire. In this case, the voids are finished with dense materials. You can create an ottoman using two regular or one thick tire. The tire must be trimmed with boards on both sides. The craft is decorated with textiles or thin rope.

To make an ottoman, you need to acquire the following devices:

1. Varnish;
2. Glue;
3. Plywood boards;
4. Electric drill;
5. Twine.

Table options

There are 2 main options for this piece of furniture. In the first case, the disk is removed, several tires are placed on top of each other, and a round board is attached to the top one. The table will be compact and comfortable. Decorating elements can be placed in the empty space inside the tires: the void is filled with coins, and a transparent tabletop is installed on top. Such a product will “catch the eye.” Small coffee tables are covered with wickerwork. If the surface is too small, then there will always be the opportunity to attach a larger tabletop. The empty space inside the tire can be filled with coins, and a transparent tabletop can be installed on top. Such a product will “catch the eye.” The second option involves using the entire wheel, including the disc. It will be installed on a support. A transparent tabletop is attached to the top. For decorative purposes, the tire should be painted to match the tone of the support leg. Tables are even made from bicycle wheels. In this case, the metal structure is not removed.

Interesting ideas

People who have their own summer cottage strive to give this place comfort, as well as greater neatness of the entire territory. To decorate the area, you can be creative not only in terms of seating, but also in the design of the entire area. Products made from tires can give your dacha a more well-groomed and beautiful look.

It is also worth noting that such crafts are not only decorative in nature, but can also provide practical benefits for the owners if, for example, ottomans are made. A car tire is a readily available material that is not so difficult to find. However, you can make a very beautiful and original thing out of it. The positive thing is that absolutely anyone can handle the work, even those who have never encountered handmade crafts before.

You can create very beautiful figures of various animals from a rubber tire. You just need to use a few tires, make slits in the right places, bend them, and the result will be a giraffe, frog, bear or caterpillar. If you wish, you can create a modern cartoon character, such as a fixie, a luntik or a minion. Additional parts are usually made from plywood sheets. When the creative process comes to an end, all products are covered with paint of various shades and installed in the yard.

We recommend: Choosing a plot of land for building a house

If you have certain difficulties with which car tire craft to choose first, then you don’t have to start your first job by creating some kind of complex character or animal. It is enough to make an ordinary but simple flower bed for plants.

Fences made from tires are a fairly simple way to give your garden a decorative look. You need to show a little imagination, and then after a little manipulation you will end up with a very beautiful flowerpot or flowerpot, into which soil will later be poured and the plant will be planted. And also, summer residents very often use tires as a compost well. This is done by placing one tire on top of another.

Swings, steps, sandboxes, chairs - all this can be made from a machine tire, which is given a second life.

Chair made from an old tire

Various furniture items can be made from car tires. This is ideal for a summer cottage, and will also become an attractive novelty for visiting guests. It is worth noting that the chair is not a simple rubber structure, but a rather comfortable object, sitting down on which you can have a good rest.

To create a chair from a tire you need to use:

1. Two car tires.
2. Flexible plywood with a size of 90 by 100 cm.
3. Several bushes of foam rubber, you will need thin and thick.
4. Felt.
5. Stapler for furniture.
6. Self-tapping screws.
7. Screwdriver.

These are all the tools that will be useful for making. If you have all this at hand, then you can go directly to production:

1. One tire is placed on the second, then they should be secured using self-tapping screws.
2. A piece of felt of the required size should be attached to the bottom bus using a stapler. With this element, the chair will easily move on any floor covering.
3. Plywood will be used as the back. It must be bent and secured to the tire using self-tapping screws.
4. After these operations, circles should be cut out from a piece of foam rubber. The first one needs to be made of thick material, which will be equal to the outer diameter of the tire. Several others are made from thin material. The large circle will need to be pushed inside the tire, which is placed on top. Thin circles will be placed on top of the tire, thus giving the product comfort. All parts must be secured with a stapler.
5. The back needs to be well treated, and thin foam rubber should be placed on it.

If you wish, you can attach a cover on top of the resulting product. This will make your homemade product even more beautiful.

Swans for the garden

Car tires make beautiful animals or birds. From this material you can make a very high-quality swan that will ideally decorate any area.

For production you will need:

1. One old tire.
2. White chalk.
3. Water-based paint.
4. Screws.
5. Drill.
6. Jigsaw.
7. Plate.

The advantage of this design is the simplicity of the product. You just need to follow a certain sequence of actions and be careful when working:

• First you need to make a sketch on the prepared tire. You need to draw the swan's head in the form of a rectangle with dimensions of 9 by 2 cm. It is better to start with the beak. After this, you can draw a neck, which will be drawn from the head and will occupy more than half the circumference of the entire workpiece. The lines need to be drawn as carefully as possible in order to make high-quality cuts along them. The tail line will be located in the beak area and will take approximately 19-20 cm.
• When the preparatory work is completed, you can begin to directly cut out the bird, using a drill and then a jigsaw. The tire is turned inside out, and thus gives a silhouette reminiscent of a swan. The widest part will serve as a support that turns inward.
• The neck and head will not hold up unless you attach a reliable stand to them. This is exactly what the plate is used for. Once the piece is completed, water-based paint can be used.

DIY ottoman

An exclusive option for a summer house would be a hand-made ottoman. It is quite simple to make, but you need to prepare certain materials for it:

1. One tire per car.
2. A good and strong thread in the form of twine. Hemp rope will also work.
3. A sheet of plywood that should be enough for several laps.
4. Self-tapping screws and glue gun.
5. Nice varnish.

It is worth noting that such a decorative element is suitable not only for a summer cottage, but also for an ordinary apartment. The ottoman will come out quite beautiful and comfortable.

The manufacturing process is as follows:

1. Plywood circles will need to be placed on the bottom as well as the top of the tire.
2. After this, everything is securely secured with self-tapping screws.
3. You can proceed to the design of the upper part, which consists of twine.
4. We use a glue gun and, gluing, wrap the rope around the plywood. This must be done turn by turn. All this will resemble a snail. The operation must be carried out until the tire is completely covered with the selected material.
5. When the creative process is completed, the entire string must be coated with high-quality varnish, which will protect the product from various influences.

If the ottoman is intended for home use, then it should be well ventilated after varnishing. Otherwise, the smell will not leave the apartment soon.

Tire parrots

Donkey made of tires

I recently saw it and really liked the idea: a donkey made from tires looks quite creative and interesting.

Tire swing

You can use tires to make a swing for a playground. They will be safer than wooden ones. To make them you will need a strong rope or chain, a jigsaw, a sharp knife and the tire itself. In addition, you should get U-bolts and nuts. Six holes are drilled into the tire - two in close proximity to each other. The tire is spray painted and left until completely dry. U-bolts are then inserted into the holes. They are fastened with nuts. From the outside, there should be a few centimeters of space between the tire and the rounded end of the bolt. On the territory you need to find a thick horizontal branch to secure the rope. Triple fastening will be enough for the structure to cope with the load. Also, the swing can be attached with two or four ends of the rope, and the tire can be positioned perpendicular or parallel to the ground.

The tire must be in perfect condition, otherwise the swing will not last long!

Crafts for the playground

Homemade products made from old car tires can also be used in various playgrounds. There are a large number of ideas that can be implemented in order to give the yard a beautiful look. Using old car tires, you can turn a playground into a fairy-tale town where children will be very interested in playing and spending their leisure time. You can make a mini-sandbox, winged swings, fairy-tale animals or cartoon characters.

Sandbox.

The simplest idea to implement is creating a sandbox. Fill a large tire with sand to the top and place a beach umbrella in the center. At night, remove the umbrella and cover the sandbox with an awning, and so that it does not fly away when the wind blows, screw screws into the edges of the tire, and create loops on the awning itself.

Making a sandbox

Every child loves to play with sand on the playground. But not every yard has a structure in the form of a sandbox. That is why, in order to create a beautiful and convenient container for sand, you can get a KAMAZ tire yourself. This device will make an ideal sandbox. You just need to place the tire on the desired area, carefully paint it, and then fill it with sand. The entire manufacturing process can be accomplished with the help of a child. The kid will really like this, because he himself will be able to interestingly color the future sandbox with his own hands.

Swing

There are many options, from simple to complex. The easiest one is to choose a stronger branch of an old tree and tie a tire to it with a strong rope. The bungee option is ready. Kids will be delighted if you use a loop fastening and attach the head and tail of a horse made of the same rubber to the tire.

Baby swing

Having rummaged around on the Internet, you can find many photos and ideas on how to use tires collecting dust in the garage and please children by making a swing.

Such swings have many advantages and advantages over plastic and wooden competitors: they are harder to break, there is more than one option for seat shapes, they tolerate temperature changes and bad weather conditions well, if the swing breaks and falls, the rubber will soften the blow, and they are easy to manufacture.

In order to make a swing with your own hands, in addition to tires, you need: a strong rope or chain, self-tapping screws, eye bolts and a drill. The swing can be installed vertically or horizontally, the installation process is not much different. Vertical:

1. Tie a rope or chain to the chosen location (tree branch or metal support).
2. Screw the eyebolts onto one side of the tire.
3. Connect the ends of the rope or chain with the self-tapping screws screwed in beforehand.
4. Measure the desired height that is suitable for your child, allowing him to climb on and off the swing independently.
5. Drill holes in the bottom of the tires for rainwater (to prevent water from accumulating inside).
6. Check the safety of the structure for strength.

The horizontal design is not complicated and by spending a few hours and a little money you will give your kids joy and bright emotions for a long time. The manufacturing process is not particularly different from vertical ones; you just need to screw in four bolts for fastening and install the seat horizontally, avoiding distortion.

Beds for your favorite pets

A tire craft can become a new place for pets to relax. There should be a pillow in the center of the finished product. Its thickness is selected in accordance with the width of the tire. To do this, draw a rectangular strip. Its length should be equal to the circumference of the tire. Then all the details of the pillow are drawn on the textile. One element is a long rectangle, the other two are semicircles. You need to remember about allowances. All parts are cut and sewn. The inner part is turned out through the hole, and after that the filler is inserted into the pillow - the soft part is ready. The next step is decorating the tire. It is painted with hypoallergenic paints without a strong odor. In the end, all that remains is to insert the soft part into the chair. The tire is ready for use in this form, but you can also attach legs to it. If the bed is intended for a cat, then a tire in the form of a swing will be a good alternative to the usual one.

The main “advantages” of using tires on your site

There are many strengths of this material, which unconditionally makes tires and tires a leader due to its significant advantages. If you use tires at your dacha, it means they will be constantly exposed to the scorching sun in any weather, and only the strongest can withstand this test, which includes tires. Their “strength” lies in the following facts.

• Any product not only has a long service life and service life, but also has a high level of wear, since the rubber has a dense structure and high quality.
• The shape, frame and initially formed silhouette do not lose shape for a long time, retaining the appearance that was originally intended, which makes the creators very happy.
• Crafts and products have not only quality, but also beauty, since all ready-made options are really very beautiful if you adhere to the appropriate technologies.
• Tires and tires are a durable material, but at the same time very malleable, since everyone is able to bring their plans to life.
• Rubber is a very durable material that is not afraid of bad weather, various mechanical damage or temperature changes - heat, heat, blizzard, snow or strong wind are not bad for a high-quality tire.

Creating a pond using tires

In addition to the tires themselves, you will need:

• plants for decoration;
• stones for “shores”;
• crushed stone;
• sand;
• PVC film.

You will need tools such as a jigsaw (electric), a construction level, a shovel and a bayonet shovel. The first step is to prepare the tire. The top part is cut off with an electric jigsaw. Then a hole is dug in the ground. The width is made ten centimeters larger than the tire. The bottom of the pit is leveled and covered with sand. The next step is waterproofing. You will need a dense material designed to protect pools. Regular polyethylene should not be used. The material is distributed along the bottom, and the edges extend half a meter beyond the extreme points of the tire. The reservoir is first filled with water so that the bottom takes its shape. The edges of the material are smoothed and sprinkled with crushed stone and sand. Thanks to this, the membrane will not slip. Then the mini-pond is decorated. It is framed with stones and painted.

Options for crafts made from tires

Car tires allow you to turn your wildest ideas into reality. Dense rubber lends itself well to processing, painting and deformation. It is perfect for garden crafts and decorating your garden. The main thing in this matter is to be careful and be patient.

What tools do you need to prepare to work with tires? For this you will need:

• sharp knife;
• self-tapping screws;
• paints and varnishes;
• brushes of different diameters;
• rubber glue;
• sealant.

Curbs, fences and more

Tire-shaped curbs are a common occurrence in small towns. This way the flower beds are separated from the rest of the space. Tires are used to make low fences to delimit zones in a garden bed, and a large number of tires can be used to create a full-fledged fence. In the second case, they are placed on top of each other, and the voids are filled with vegetation. It should be noted that such a construction will cost a significant amount. A pyramid-shaped pile of tires will become a favorite place for children under 10-11 years old to play. A large tire, for example from KamAZ, should be placed at the top of the structure. Tires trimmed with boards can be used to lay paths. If there are significant differences in height on the site, tires will be useful for creating stairs. They need to be fixed in the soil on at least one side and filled inside with earth and sand.

Decorative well

You will need the following elements:

• thick branch;
• chain;
• flowerpot;
• laminate;
• small bucket.

3-4 tires will be required. They need to be placed on top of each other and painted with different colors. You can make a “brick” drawing. The central part of the structure is covered with earth or crushed stone. A large round flowerpot will decorate the top of an improvised well - the trunk is ready. Next comes the design of the head. Side posts for the gate are created from two long boards. The winch itself can be made from a piece of a thick branch. It can be singed or painted to make the collar different in color. The gate lever is made from several tubes. They are connected by corner structures. An iron chain is attached to the winch. Since it cannot be lowered down, you will have to wrap it around the collar and lever. A medium-sized plastic bucket is attached to the end of the chain. The canopy is made in the form of a dome or gable roof. The material used is laminate. If desired, the design is decorated with various elements.

Possible options

Handmade can be very diverse. It all depends on personal preference and the garden plot itself. It is worth weighing the size of the future structure with the area of ​​the site. To make everything look harmonious, it is advisable to follow the following general compositional rules:

• Bright colors are suitable for a recreation area or playground.
• It is advisable to combine containers for planting with the facade of the building and the path.
• The dimensions of the seats must correspond to the parameters of the human body - this must be taken care of in advance and everything calculated so that later there is no awkwardness and you do not have to redo all the work. Choose the right paint and varnish materials so that they do not stain the body and clothes.

We recommend: Wall corrugated sheeting: types and advantages

Chair

The back is made of a sheet of plywood and the legs are from a former bedside table, plus a thick tire. Fasten the parts together with strong screws. Fill the seat with a cushion or screw on a circle of plywood. Decorative cords and upholstery fabric are suitable for decoration, and the outdoor version can simply be painted.

Table

You can take an old coffee table as a base or assemble it yourself from a sheet of plywood (cut to the shape of a circle) and 4 legs. We place a tire on top of the tabletop, screw it in with self-tapping screws and decorate it with a cord or rope. The rope is attached well with ordinary PVA glue.

Border

We cut the tires in half. Do not skimp and do not cut, as is sometimes advised, into 3 parts. If you dig the ends of the halves deeper into the ground, the structure will become almost eternal. And the high side will be a good barrier for both a scooter and a bicycle.

Clue! Color the finished fence, getting rid of the gloomy black color.

Fence

It will take a lot of tires, but the result is worth it. We stack the tires on top of each other in a checkerboard pattern. We fasten them to each other with self-tapping screws. For stability, we fill each tier with earth, making the bottom of each ring from available material (plywood, rubber, tin). We plant lawn grass, virgin grapes or other hanging plants in the ground. Every year such a fence will only get better.

Newspaper girl

A deep tire is a good basis for a newspaper rack. Cut off half or a third. We screw the legs made of wood or metal. We choose a suitable shade for painting to match the interior: silver, white, scarlet, etc. The stylish accessory is ready.

Chandelier.

The imagination of designers is truly limitless - you can even make a ceiling chandelier from tires.

Rocking chair.

By cutting the tire in half and nailing a flat piece of wood to the cut piece, you can end up with an excellent outdoor rocking chair for a child. But you can also paint it in your child’s favorite shade, and then he will spend a lot of time on it.

Palm.

First you need to flatten the tire by cutting it with a jigsaw, then using a pencil to draw the outlines of palm leaves, which are again cut out using a jigsaw and painted green. The resulting leaves are nailed to the trunks of trees that have outlived their useful life.

Pond.

A great idea for creating a garden pond. A hole is dug to the size of the tire, the latter is covered with a thick film, and a hose with water is lowered inside. The edges of the tire are masked with all sorts of flat stones, and moisture-loving plants are planted. Finally, the pond is filled with water. The entire process of creating such a pond can be studied in the photo below.

Wash basin.

How do you like this washbasin? It’s very original, isn’t it?

Bird feeders

A small-diameter wheel from a wheelbarrow or baby stroller is a ready-made feeder for feathered guests of the garden plot. Tie a rope to it and hang it near the beds. You can decorate not only with paints, but also with tin figures and decorative brushes.

We remind you! Don't forget to add food!

Garden furniture

Some craftsmen make chairs, tables, ottomans and sofas from tires, using them to decorate a summer cottage or garden.

The simplest piece of furniture made from tires, which is the easiest to make, is an ottoman. To do this you will need: cord (rope, twine), plywood, screws and glue.

1. Cut two disks from plywood
2. Cover the holes with discs
3. Attach the plywood with self-tapping screws.
4. Wrap a rope around the tire around the circumference, securing it with hot glue.

To make a soft ottoman you should take: foam rubber, fabric, plywood, screws, a stapler or glue.

1. Make two disks of plywood to cover the holes.
2. Glue foam around the circumference of the tire and wrap it with fabric.
3. Attach the plywood disk to the base, and wrap the remaining one with foam rubber and cover it with fabric, fastening it with a stapler.
4. Secure the soft cushion on top with screws or glue.

To make such ottomans you don’t need to be a master, you just need desire, time and consumables. Using a similar technology, unusual coffee tables are made, only the legs are screwed to the bottom disk, and the tabletop is made in diameter larger than the base.

Garbage bins

A simple design of 3-4 tires will help solve the problem of placing garbage and putting things in order, either in a country house, on the territory of a private house or in the courtyard of high-rise buildings. In addition to the main element, you will need paint and garbage bags.

1. Place the tires on top of each other one by one, securing them together with bolts or glue.
2. Paint the resulting barrel any color you like.
3. Place a trash bag inside and your new trash can is ready.

Flower beds

A country or garden plot or vegetable garden can be improved and decorated without serious expenses by making small flower beds with your own hands from unnecessary tires. The rubber from tires is very flexible and elastic, so it is most suitable for various treatments; it is not difficult to give it the desired shape.

We recommend: Finishing the attic: options for cladding the inside of the attic floor with your own hands, the best ideas for decorating with wood

The simplest option is to put the tire on the ground and fill it with soil, then decorate it, let it dry and start planting flowers.

Building a multi-level flower bed is not difficult. To do this, take a certain number of tires, cut a plywood disk for each and attach it to the bottom. Place the tires in a pyramid shape, filling them with soil one at a time. Paint and plant the plants.

Hanging small flower beds. Hang a pre-painted car tire vertically on a rope (preferably near a wall), and place primer on it. Do not forget to make several holes for water drainage; the accumulation of liquid can lead to rotting of the root system of the planted plant.

And in conclusion, let’s say that by using old tires to decorate playgrounds, vegetable gardens, orchards and flower beds, you not only decorate them, but also take care of the environment and ecology.

Complex geometric models

They perfectly complement any area in a modern high-tech style. In this case, it is necessary to cut closed strips of different widths. Thanks to their flexibility, they can be folded in the most unimaginable ways.

If desired, a Mobius strip is performed, which creates the effect of infinity. By stacking several of these plastic elements, you can create a beautiful pot design for any planting. It looks quite futuristic and stylish.

Bird feeders

Feeders are made from tires: both for pets and birds. In the second case, you will need to hang it above the ground. 3 identical pieces are cut from the tire. They are connected with bolts, attaching long edges to each other. This element will act as a roof. The pallet will be attached using PVC pipes. Protruding irregularities must be carefully sanded. The pipe inserts are then cut from a small piece of wood. To get the desired shape and size, use a knife and a hammer. The perfect cylinder can be made using a miniature grinding machine. Self-tapping screws will secure the inserts at the edges of the tubes. You will need 4 barrels. They are attached through the tires with thin nails or using hot glue. The pallet itself is made from one large piece of tire. It should be smaller in size than the upper part, approximately 2-3 times.

Bicycle parking spaces

This is a good alternative to metal structures. About a dozen parking spaces will need to be made. The distance between the tires should match the width of the wheels or be slightly smaller. First you need to decide where exactly the parking spaces will be located. For reliable fastening, a rectangular hole is dug in the ground. The tires are fixed and covered with earth exactly to the middle. The free part of the rings can be sealed with something, for example, plywood boards. They should be painted to match the color of the tires. The tires themselves can also be painted. If you remove bicycles from the impromptu parking lot, you will get an interesting play area for children. To more securely secure vehicles, you can make two rows of tires - for the front and rear wheels. The tires can be used for physical exercise.

Other ways to use tires in the interior

Brightly colored tires will become a full-fledged element of the interior. A tire can “turn” into a washbasin. In this case, it is not necessary to paint it - the product will look stylish even in its original state. In designer houses and apartments you can see chandeliers made from such non-standard material as tires. The “highlight” of the interior will be an impromptu umbrella stand. To make it, you will need to drill wide holes at a distance of no more than a quarter of a circle from each other. 2-3 small tires will make a beautiful flowerpot. A small decorative table with textile upholstery will appeal to little children. Another option is to replace your regular trash can with one made from colorful tires. You can implement non-standard ideas. For example, placing a low-frequency speaker system in the bus.

You can make many small holes of different shapes on the tires, and place lighting inside, then you will get a very beautiful decorative element at a low price.

Magnificent garden furniture

These can be armchairs, banquettes, benches, small tables, hanging swings, rocking chairs. And of course, the simplest exercise machines are in the form of paths with small obstacles for playing sports.

If you cut individual elements of different shapes, you create a picture of a tire for children. You can come up with any plot for it.

Naturally, this is not all that can be made from tires. The images and finished results are limited solely by the imagination and handicraft of those people who are engaged in the production of crafts from tires.

If you don’t have confidence in your own abilities, experts recommend starting with the simplest, and then, gradually, the awakened passion will push you to create more original and complex designs. If you don’t have enough ideas, then by looking at the tires in the photo, you can come up with something of your own, unlike anything else.

Please repost

0